steamfoundry / target_cy8ckit-041-41xx

BSP for PSoC 4100S Prototyping board (CY8CKIT-041-41XX)

CY8CKIT-041-41XX BSP

Overview

The PSoC™ 4100S Pioneer Kit enables you to evaluate and develop with Cypress's fourth-generation, low-power CAPSENSE™ solution using the PSoC™ 4100S device.

To use code from the BSP, simply include a reference to cybsp.h.

Features

Kit Features:

• Ready-to-Use CAPSENSE™ Trackpad
• EZ-BLE PRoC module
• Potentiometer
• Rechargeable coin-cell battery

Kit Contents:

• CY8CKIT-041-41XX PSoC™ 4100S Pioneer board
• USB Standad-A to Micro-B cable
• Water dropper
• Four press-fit connectors (for Arduino headers)
• Four jumper wires
• Quick Start Guide

BSP Configuration

The BSP has a few hooks that allow its behavior to be configured. Some of these items are enabled by default while others must be explicitly enabled. Items enabled by default are specified in the CY8CKIT-041-41XX.mk file. The items that are enabled can be changed by creating a custom BSP or by editing the application makefile.

Components:

• Device specific category reference (e.g.: CAT1) - This component, enabled by default, pulls in any device specific code for this board.

Defines:

• CYBSP_WIFI_CAPABLE - This define, disabled by default, causes the BSP to initialize the interface to an onboard wireless chip if it has one.
• CY_USING_HAL - This define, enabled by default, specifies that the HAL is intended to be used by the application. This will cause the BSP to include the applicable header file and to initialize the system level drivers.
• CYBSP_CUSTOM_SYSCLK_PM_CALLBACK - This define, disabled by default, causes the BSP to skip registering its default SysClk Power Management callback, if any, and instead to invoke the application-defined function cybsp_register_custom_sysclk_pm_callback to register an application-specific callback.

Clock Configuration

Clock	Source	Output Frequency
CLK_HF	CLK_IMO	48 MHz

Power Configuration

• System Idle Power Mode: Deep Sleep
• VDDA Voltage: 3300 mV
• VDDD Voltage: 3300 mV

See the BSP Setttings for additional board specific configuration settings.

API Reference Manual

The CY8CKIT-041-41XX Board Support Package provides a set of APIs to configure, initialize and use the board resources.

See the BSP API Reference Manual for the complete list of the provided interfaces.

More information

• CY8CKIT-041-41XX BSP API Reference Manual
• CY8CKIT-041-41XX Documentation
• Cypress Semiconductor, an Infineon Technologies Company
• Infineon GitHub
• ModusToolbox™

---

© Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation, 2019-2022.