sprhawk / btstack Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/btstack
Automatically exported from code.google.com/p/btstack
What steps will reproduce the problem?
1. Purchased app today, received confirmation from Amazon charge, clicked
install
2. two warnings: host unavailable (click ok), host unavailable (click ok),
cydia then thinks the app installed, but it's not on iPhone
3. Back to Cydia to try to reinstall, but now asks me to purchase again
I have hard rebooted my iPhone (16GB 3G, BlackRa!n, 3.1.2) and same result.
The Demo installs just fine, but I can't get the normal app to install.
Original issue reported on code.google.com by [email protected]
on 28 Mar 2010 at 7:14
What steps will reproduce the problem?
1. Enable BTStack Mouse
2. Pair with Magic Mouse
3. Open any app and see that the bottom half of the screen doesn't react to the
mouse.
What is the expected output? What do you see instead?
When using the mouse on the iPad the bottom half of the screen should receive
click events.
Whats happening is the mouse never receives the event when inside an app. But
when viewing
your icons on the home screen, the iPad receives all click events on the screen.
What version of the product are you using? On what operating system?
iPad (iPhone OS 3.2)
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 21 May 2010 at 2:04
What steps will reproduce the problem?
1. Connecting my Apple Mighty mouse to BTstack Mouse
What is the expected output? What do you see instead?
I expect to be able to click with the mouse, but it doesn't work.
What version of the product are you using? On what operating system?
Latest verson of BTstack Mouse on a jailbroken iPhone 3G with OS 3.1.2
Please provide any additional information below.
Is this going to be fixed? When will this be fixed?
Original issue reported on code.google.com by [email protected]
on 5 Feb 2010 at 4:07
Where can I find information on BTstack from inquiry Bluetooth Address to
RFCOMM connection
Original issue reported on code.google.com by [email protected]
on 29 May 2010 at 4:10
What steps will reproduce the problem?
1.none
2.
3.
What is the expected output? What do you see instead?
If i click nothing happens
What version of the product are you using? On what operating system?
Initial public release, iPhone 3GS 3.1.2
Please provide any additional information below.
Im using an apple mighty mouse
please email me if you would like anymore information of my device
[email protected]
Original issue reported on code.google.com by [email protected]
on 6 Jan 2010 at 12:37
What steps will reproduce the problem?
1. Reconnect the mouse
2.
3.
What is the expected output? What do you see instead?
I expect the mouse pointer to move and have the ability to click items.
I can connect to the mouse and the cursor appears in the upper left corner,
but it can not be controlled.
What version of the product are you using? On what operating system?
RAD Tech BT500+ mouse on Ver 3.0.1 with BTstack mouse ver 1.0-23116
Please provide any additional information below.
Here is 2 files of the sniff I took of the problem
Original issue reported on code.google.com by [email protected]
on 7 Jan 2010 at 9:58
Attachments:
(moved from a comment I posted, and edited to expand)
BACKGROUND:
Excellent -- thank you very much. As a deaf guy, I often communicate on
keyboard even in person. I just purchased a copy of BTStack keyboard and
it works perfectly with my ThinkOutside? keyboard. (I've used it for many
years on PocketPC's as well as on a BlackBerry? Curve). I'm also a
developer too as well. Matthias, I have a big favour to ask of you.... I
would like to request that improvements to be made:
FEATURE REQUEST:
An option to automatically reconnect to the most-recently connected
keyboard when the keyboard is turned back on. Meaning, I can take my
iPod/iPhone out of my pocket, open the Bluetooth keyboard, and start
typing right away. These could be perhaps two checkboxes:
[X] Keep keyboard always connected [disable sleep]
[X] Automatically reconnect to last keyboard [even if not discoverable]
Warning: Enabling either or both above options may consume extra battery
power.
This is how the keyboard driver on the Windows Mobile, as well as the
discontinued BlackBerry? Curve driver (OS 4.2) made by ThinkOutside?.
Meaning the keyboard always worked when opened up, although there was
often a 2-3 second delay before the text showed up. Either the keyboard
driver is continuously reconnecting to the existing pariing (MAC address?)
or the keyboard is initiating an incoming connection to the device.
Meaning I would never have to launch the BTstack keyboard app again except
to turn on/off the automatic reconnect feature (unless the iPod/iPhone was
rebooted).
I know that whenever the keyboard is turned back on, it won't be
discoverable. But that works in the keyboard drivers of other devices.
This means BTstack would need to memorize what keyboard it paired with
last time, and might require polling for it directly "in the blind". I
know, this will consume more battery power, but this feature is extremely
important to me. (Because I am a deaf guy and I often like to communicate
by keyboard --- whipping out my iPod and keyboard, powering up the
keyboard, and immediately typing, without needing to unlock the iPhone and
launch BTstack first. It should work regardless of which device is
turned on first, and should work when the keyboard is powered up (many
keyboards, such as ThinkOutside, don't reenable discoverable mode when
merely opened up, which powers it on)
Also: This will also solve the following problems too:
- Keyboard stopping working if it goes out of range
- Keyboard driver stopping working if the keyboard "goes to sleep" on its
end (Thinkoutside ultra low power mode)
Meaning, BTstack can be made to automatically reconnect when the keyboard
is back in range, or when the keyboard is woken up by a keypress.
BTW - when I use on other devices, I noticed that the ThinkOutside?
keyboard also has a built in keyboard buffer, and bursts out the last few
keypresses once fully reconnected. But you don't have to worry about this
feature as I don't mind waiting 2-3 seconds for an automatic reconnect)
Can you please add this feature to your BTstack driver too? I offer to pay
$50 by PayPal? immediately up front if you can work on this feature and
make it available as soon as you are able to.
P.S. BTstack keyboard is the ONLY reason I jailbroke my iPhone! :-) The
first app I ever purchased from Cydia (yet).
Original issue reported on code.google.com by [email protected]
on 14 Feb 2010 at 10:15
Environment:
- Jailbroken iPhone 2.2.1
- XCode 3.1
Any time I try to open any of the BT devices on my phone, open is returning
with -1.
I have logged in as root on my phone and executed chmod 7777 on each BT device
under /dev
with success.
Does anyone else have any ideas?
ls -l produces 'crwsrwsrwt' for all devices.
Full disclosure, I'm not a Unix pro.
Thanks,
Will
Original issue reported on code.google.com by mapp%[email protected]
on 30 Aug 2009 at 5:52
Hi, I use the btstack and rfcomm to conntect PC bluetooth adapter. In PC
bluetooth adapter, I can find out: the ipod touch had conntected to PC
bluetooth adapter.
1 I hope that I can broadcast some information by PC bluetooth adapter to
the ipod touch. How to do it?
2 How to send information from PC adapter to ipod touch by bluetooth? I
made a /dev/rfcomm0, but I can not open it.
Original issue reported on code.google.com by [email protected]
on 25 Mar 2010 at 9:01
What steps will reproduce the problem?
1. Run "Keyboard" from Springboard
2. "Activating BTstack ...."
3. Program quits to Springboard right away without showing anything
What is the expected output? What do you see instead?
Expect to see apple keyboard
What version of the product are you using? On what operating system?
2nd Generation Ipod Touch 8gb model PA623C
OS version 3.1.3 (7E18)
BTstack 0.1-585 via Cydia
BTstack Keyboard 1.0-24939 via Cydia
Please provide any additional information below.
Trying to get BTstack and BTstack keyboard working to hook up apple bluetooth
wireless
keyboard, BTstack keyboard program terminates right away with no ouptut.
Original issue reported on code.google.com by [email protected]
on 20 May 2010 at 5:16
1. install btstack
2. copy text from a BeejiveIM conversation or other application
3. attempt to paste into a BeejiveIM conversation
No text is pasted into the text entry window (Beejive uses a custom grey
rounded rectangle, not the the usual text entry widget). Any selected text
is deleted, as if pasting an empty clipboard. Typing with a bluetooth
keyboard into this widget works fine, but no pasting.
The problem happens even if the BTstack Bluetooth Stack isn't running, ever
since installing BTstack.
iPhone OS 3.1.2 jailbroken with blackra1n
BTstack 0.1-493
BTstack Keyboard 1.0-23131
Original issue reported on code.google.com by [email protected]
on 11 Jan 2010 at 1:25
What steps will reproduce the problem?
1. Connecting with HP Bluetooth Mouse
2.
3.
What is the expected output? What do you see instead?
I expect it to connect to the mouse, but instead the error about incorrect
pair code pops up.
What version of the product are you using? On what operating system?
1.0-23165
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 15 Jan 2010 at 6:00
I have bought a bluetooth mouse Razer "Pro|Click Mobile", I tried to
connect with BTStack Mouse, but it show an error message: "Authentication
Failed! Please try again and make sure that you enter the PIN correctly.
What version of the product are you using? On what operating system?
iPhone 3Gs 3.12 new version(the one needed to rain after every reboot)
Blackrained.
Razer "Pro|Click Mobile".
Original issue reported on code.google.com by [email protected]
on 7 Jan 2010 at 4:19
What steps will reproduce the problem?
1. open the btstack keyboard/mouse
2. pair the microsoft wireless motebook presenter mouse 8000
3.
What is the expected output? What do you see instead?
BTstack keyboard/mouse is supposed to show the mouse name and waiting to
be paired with ipad/iphone. But after detecting the mouse code, the
btstack keyboard/mouse crashed before showing the mouse name every time.
What version of the product are you using? On what operating system?
btstack mouse and btstack keyboard (1.0-24939) on ipad(3.2 with spirit jb)
and iphone(3.1 with blackra1n jb). The bt mouse I tried to use is
microsoft wireless motebook presenter mouse 8000.
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 19 May 2010 at 7:54
Hello,
1 - I've just installed btstack keyboard and mouse. My magic mouse works fine.
Although my
bluetooth apple keyboard is detected and Keyboard app regnonizes keys but i
can't write any key
neither on "Test input fields" nor others apps.
2 - Does btstack mouse (for magic mouse) support multitouch and slip movement
(for changing
page app, look into photo's gallery) ?
Goos job and best regards.
Original issue reported on code.google.com by [email protected]
on 1 Apr 2010 at 2:54
It would be great for us Swiss expats (or expats from other European
countries!), using US keyboards but wanting to type accents, to be able to use
the same key combinations you can use on OS X. E.g.:
http://french.about.com/od/writing/ss/typeaccents_8.htm
Original issue reported on code.google.com by [email protected]
on 17 Feb 2010 at 10:53
Is support for the SIM access profile available/planned?
Original issue reported on code.google.com by [email protected]
on 9 May 2010 at 5:38
Hi, now I used btstack in my project. When the ipod touch enter lock mode
and standby, the bluetooth also disconnect to other device (for example PC).
Original issue reported on code.google.com by [email protected]
on 25 Mar 2010 at 8:54
rfcomm is not working in btstack
Original issue reported on code.google.com by [email protected]
on 5 Jan 2010 at 5:39
What steps will reproduce the problem?
1.
Connect any supported bluetooth mouse to iPad
Please provide any additional information below.
When running Keynote on iPad in presentation mode, a paired bluetooth mouse can
be used as a clicker to move forward. However clicking the right mouse button
will not move one slide back. ONLY the left button has any effect. Is it
possible to fix this so that we can go forward and backward in presentations?
Original issue reported on code.google.com by [email protected]
on 4 Jul 2010 at 10:29
What steps will reproduce the problem?
1. install and run BTStack Mouse
2. attach BT Mouse (eg. Trust 16341)
3. click an Item at HomeScreen
What is the expected output? What do you see instead?
I expect that the App will Open.
But BTSTack thinks I make a long click and the Icons are chaking to remove or
move them.
I do not have this all the Time, but mostly.
If i click very fast, the App will run.
What version of the product are you using? On what operating system?
I run Version 1.0-25562 on the Ipad with OS3.2
Original issue reported on code.google.com by [email protected]
on 8 Jul 2010 at 11:55
It would be good if BTdaemon support TCP socket (it's currently running with
unix socket).
I already implemented option support for BTdaemon, libBTstack will be
implemented soon.
Please take a look in the uploaded patch.
Original issue reported on code.google.com by iwatth
on 28 Feb 2010 at 5:49
Attachments:
I have the complete version of BTStack GPS and it connect with my external
GPS receiver but when I open TOmTOm it doesn't work...
Original issue reported on code.google.com by [email protected]
on 12 May 2010 at 7:49
Hi Matthias,
congrats to the excellent work !
I was trying to build the tree and add it into a custom project but it seems
I'm having a few
unexpected troubles, thus a simple question arose: is btstack working on
regular non-jailbroken
iphones ?
I was trying to make a simple app pairing with a wiimote work (based on your
example) but failed :(
, if you have a working project example tree on that I'd love to see it ;)
(i.e. the kind of tree where it
would just need changing the code-signing certificate and build)
thanks !
Original issue reported on code.google.com by [email protected]
on 8 Aug 2009 at 11:57
What steps will reproduce the problem?
1. Launch application
2. Sync Device
3. Observe settings are mentioned, but are not available
What is the expected output? What do you see instead?
Settings menu for mouse sensitivity and button customization should be
included in the settings app.
What version of the product are you using? On what operating system?
1.0
Please provide any additional information below.
Please provide settings to allow for task customization of more than two
inputs. I have a mighty mouse which supports up to 4 inputs. Being able to
launch an app from one of these inputs would be very helpful, as would
scroll support. Keep up the good work!
Original issue reported on code.google.com by [email protected]
on 6 Jan 2010 at 1:53
Jump desktop is a remote desktop app for ipad. This app has great support
for bluetooth keyboard which enables the users to use short cut such as
copy-paste and select-all. It also support arrow keys. I tried these
keyboard functions with ipad built-in bluetooth keyboard connection. It
worked great. The problem is that when using built-in bt keyboard
connection, I can't use bt mouse.
I bought the btstack keyboard and hope with this app and bt keyboard and
mouse ipad will become a great terminal. However, it seems that the
btstack keyboard only works as the basic keyboard so there is no arrow
keys and shortcut such as copy-paste when using jump desktop with btstack
keyboard. Is it possible that btstack keyboard working the same as ipad
built-int bt connection such that all keyboard function of jump desktop
can work properly?
Thanks
Original issue reported on code.google.com by [email protected]
on 19 May 2010 at 8:12
When I go into my Settings->General page on my iPAd, it shows Bluetooth
"Unavailable". I start up BTStack GPS and the message is "Bluetooth not
accessible!"
It was initially working after I downloaded BTStack GPS now a few days later
itI'm getting this error. I've tried to turn off the iPad off completely but
that doesn't bring it back. I've also tried to reinstall BTStack & BTStack GPS
but this didn't help either.
I've previously had this issue and a full restore corrected it. However I'm on
the road this time and a full restore isn't possible for me, and I'd prefer not
to do a reset either.
In the syslog I'm seeing the following message:Jun 26 15:10:43 The-Guide
com.apple.BTServer[778]: Running /etc/bluetool/iPad1,1.boot.script.
Jun 26 15:10:43 blahblah com.apple.BTServer[778]: Cannot read termcap database;
Jun 26 15:10:43 blahblah com.apple.BTServer[778]: using dumb terminal settings.
Jun 26 15:10:43 blahblah com.apple.BTServer[778]: Opening
com.apple.uart.bluetooth @ 115200 baud.
Jun 26 15:10:43 blahblah com.apple.BTServer[778]: bluetool: wake failed: error
13
Original issue reported on code.google.com by [email protected]
on 26 Jun 2010 at 8:23
What steps will reproduce the problem?
1. Connecting Nyko Wand to iPhone via btstack
2.
3.
What is the expected output? What do you see instead?
It's expected that the device stays connected throughout use.
It connects, and using wiimote opengles demo, I can see the iPod Touch is in
fact receiving
input from the controller, but it only lasts for 3 seconds, and then the
Bluetooth connection is
dropped. It would be really nice if you guys could fix this problem, as I can't
afford to spend
another 50$.
What version of the product are you using? On what operating system?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 18 Jan 2010 at 3:14
What steps will reproduce the problem?
1.Launch BTStack app.
2.Works with Bluetooth Mouse.
3.Launch VNC Viewer app on iPad, and connect to my Mac Mini via web.
4.See attached screenshot of Remote Desktop shown on iPad screen. Note two
cursors in the attachment. One cursor is from VNC Viewer via iPad
Touchscreen and operates Remote Mac. Second cursor is from Bluetooth Mouse
via BTStack. Does not translate to controlling the remote desktop.
What is the expected output? What do you see instead?
Expected Bluetooth Mouse to control Remote Desktop via VNC Viewer app.
It did not. VNC Viewer app does not recognize Bluetooth Mouse. Can you
fix or ask RealVNC to recognize the mouse cursor generated by the BTStack app?
Reason this is needed is to enter Flash-based chat room via a Remote
Desktop and be able to access this Flash-based chat room from an iPad or
iPhone.
What version of the product are you using? On what operating system?
BTStack, latest version as of May 9, 2010.
Please provide any additional information below.
Any help is appreciated!
Thanks you,
Alan
Original issue reported on code.google.com by [email protected]
on 11 May 2010 at 2:27
Attachments:
Not sure if it can be done with this project. But it would be nice to have
a replacement BT stack for AVRCP so next/prev would work on the iPhone.
Original issue reported on code.google.com by [email protected]
on 25 Dec 2009 at 3:44
What steps will reproduce the problem?
1. Run "Keyboard" from Springboard
2. "Activating BTstack ...."
3. Program quits to Springboard right away without showing anything
What is the expected output? What do you see instead?
Expect to see apple keyboard
What version of the product are you using? On what operating system?
2nd Generation Ipod Touch 8gb model PA623C
OS version 3.1.3 (7E18)
BTstack 0.1-585 via Cydia
BTstack Keyboard 1.0-24939 via Cydia
Please provide any additional information below.
Trying to get BTstack and BTstack keyboard working to hook up apple bluetooth
wireless
keyboard, BTstack keyboard program terminates right away with no ouptut.
Original issue reported on code.google.com by [email protected]
on 20 May 2010 at 5:16
Hi,
I've been using btstack GPS (latest version) on my iPod Touch 2G for a while
now, and it has always worked great. However, since I've installed iOS 4.0
(jailbroken with Redsn0w 0.9.5b5-4, using a ipsw you can find here:
http://tinyurl.com/23owvuq) the app causes the springboard to crash. Even when
you reboot the device, it remains in safe mode. In others words, there is no
way to open the app and the only way to solve the problem is to uninstall the
app.
So my question is, what do you think is causing the problem? And of course, is
there a way to prevent and/or solve it?
Thanks!
Daan
Original issue reported on code.google.com by [email protected]
on 24 Jun 2010 at 12:30
It would be good if libBTstack.dylib cab be compiled for iPhoneSimulator (i686).
I already modified configure.in to make it support --target=iphone-simulator,
see the patch.
NOTE: Building on iPhoneSimulator will make BTdaemon uncompilable because it
needs
BluetoothManager private framework which is available only in iPhoneOS, but I
don't know where to
remove this target from Makefile.
Original issue reported on code.google.com by iwatth
on 28 Feb 2010 at 7:08
Attachments:
Hi there
a couple of suggestions/requests.
1. if in an environment with very many bluetooth devices around, its hard to
find the
keyboard/mouse. would it be possible to only show keyboards/mice in the
keyboard/mouse
selection? although it is interesting, i dont really need to see all other
bluetooth phones in my
area.
2. i have a mighty mouse, and I know that its clicks are currently not
reporting. would it be
possible to use the keyboard for either a) clicking or b) moving the mouse
pointer, while we wait
for the mighty mouse to work. that being said, I do not really want to replace
my mouse for this
reason alone, so Matthias, I would be happy to pay for a mighty mouse enabled
edition of the
mouse app.
Cheers,
Michael
Original issue reported on code.google.com by [email protected]
on 1 Mar 2010 at 11:50
Hi, I think maby this will be a hard one, but bluetooth DUN combined with some
tun/tap drivers
would be a great help for connecting to the internet when no wifi is avalable
on ipod touches (from
another 3G/GPRS phone).
Original issue reported on code.google.com by [email protected]
on 6 Jan 2010 at 8:26
What steps will reproduce the problem?
1. Start snes4iPhone
2. Connect Wiimote (works great up to this point)
3. Plug in Wii Classic Controller into the Wii Remote expansion port.
Note: Connecting a Wii Remote with Wii Classic Controller already plugged in
also causes same problem.
What is the expected output? What do you see instead?
The Wii Classic Controller should function as an extension to the Wiimote.
Instead the Wiimote becomes completely unusable and app hangs.
What version of the product are you using? On what operating system?
BTstack Mouse v1.0-24869
Running on an iPad OS3.1
snes4iphone 7.0.0
Please provide any additional information below.
hci_dump.pklg is attached to this bug
Note: I've also reported this to the author of snes4iphone, no response yet.
http://www.zodttd.com/wiki/index.php/Snes4iphone
Original issue reported on code.google.com by [email protected]
on 11 Jun 2010 at 5:34
Attachments:
At the moment, even with the firmware 3.1.2, there's no support for HFP or
HSP on the iPod Touch. Could it be possible to add it to btstack?
Original issue reported on code.google.com by [email protected]
on 12 Jan 2010 at 3:40
What steps will reproduce the problem?
1. Paste text to SMS app, usually happens on 2nd attempt to paste
2.
3.
What is the expected output? What do you see instead?
Text not pasted
What version of the product are you using? On what operating system?
latest as of date. OS 3.1.2
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 10 Jan 2010 at 7:10
I have a feeling that BTstack is sometimes getting "killed" as I am starting or
using applications that use more memory.
This is especially annoying as it means that I have to exist the application,
turn off the keyboard, turn it back on, restart the Keyboard app... hoping that
this won't happen again the next time I start another app.
Is this something that could be resolved in BTstack?
Original issue reported on code.google.com by [email protected]
on 17 Feb 2010 at 10:47
The keyboard is not functional for anything other than the test panel
("Test Input Fields") in the paring setup.
The keyboard pairs properly and I am able to type text in the test box.
When pressing home, the Keyboard app shows "On".
I had originally installed the demo application. I uninstalled this and
re-installed the purchased application.
Original issue reported on code.google.com by lfs%[email protected]
on 2 Jan 2010 at 8:15
What steps will reproduce the problem?
1. Run btstack keyboard and mouse applications
2. Run speed test application (have tried several)
3. Wireless connection intermittently drops as well
What is the expected output? What do you see instead?
Download speed expected is 21kb/s with out btstack active
Download speed actual is ~2kb/s with keyboard and mouse
Disable mouse and keyboard apps will cause temporary loss of wireless
What version of the product are you using? On what operating system?
1.0-24939 on os 3.2
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 27 May 2010 at 4:08
I purchased BTStack Keyboard, and it seems to work in text message,
email, but not in other apps. For example, in Safari, I can't type more
than
one character on google search box. If I type Hi, it only accepts h and
nothing else. It doesn't work with on-screen keyboard either. How can I
fix it?
Btw, I power off and power on the phone after the installation. Thanks.
Original issue reported on code.google.com by [email protected]
on 10 Jan 2010 at 9:24
For a project I'm working on, it would be nicer if I could use BTStack as a
library/framework for my
iPhone, any way to accomplish this yet?
If not, I'm willing to work a bit to get it to compile in to a
library/framework, so I don't have to
include the btstack sources in to my project
Original issue reported on code.google.com by [email protected]
on 31 Aug 2009 at 11:56
What steps will reproduce the problem?
1. Open btstack mouse and turn bluetooth mouse on
2. Choose mouse and have it start to sync
3. Get error message
What is the expected output? What do you see instead?
I expect it to sync and start working but I get an error message saying
"your mouse turned off its discovery and is unable to sync" yet I have
tried pushing the visibility button when it is syncing and it didn't do
anything
What version of the product are you using? On what operating system?
Microsoft Bluetooth Notebook Mouse 5000 on jailbroken ipod touch on 3.1.2
operating system.
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 6 Jan 2010 at 6:08
Hi,
I tried to buy BTstack gps on my iphone over amazon...but i'm stuck at the
amazon login.i enter my account data and it's not doing anyting!!!...
can i somehow pay over the internet and not over cydia???
Aco
Original issue reported on code.google.com by [email protected]
on 6 Jul 2010 at 11:30
I am looking for support for a commercial development project.
We want to talk from the iPhone to a bluetooth device via the bluetooth
serial communication profile. We are doing this already successfully on
PalmOS and need help to port it to the iPhone.
If btstack looks like a solution for our requirement and you could help me
to get it running, please contact me for details: [email protected]
Original issue reported on code.google.com by [email protected]
on 9 Oct 2009 at 12:15
What steps will reproduce the problem?
1.connect silver bluetooth apple keyboard to ipad using btstack keyboard
2. attempt to usevolume, brightness or playback keys
What is the expected output? What do you see instead?
expected output is brighten or dim screen, volume up/down, play/pause, etc.
nothing happens and nothing is displayed on screen
What version of the product are you using? On what operating system?
latest update, also using btstack mouse at the same time
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 28 May 2010 at 6:51
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 21 Feb 2010 at 9:17
I have a Nokia phone which can send GPS data over BT using a program called
ExtGPS. I am able to receive the GPS NMEA data on my laptop via bluetooth.
The problem is that on my Nokia phone, there are several other BT services
running and ExtGPS uses BT channel 12 (not channel 1 like most dedicated
external GPS devices). It is not possible to selectively stop individual
BT services on the phone in order to make ExtGPS use channel 1.
Could you enhance BTstack GPS to allow the user to specify the BT channel
number for the connection?
Am currently using BTstack GPS Demo 1.3.
Thanks!
Original issue reported on code.google.com by [email protected]
on 4 Jun 2010 at 4:24
What steps will reproduce the problem?
1.winadmin on iPad to launch remote windows desktop with apple magic mouse
2.mouse features work except for click and drag
3.
What is the expected output? What do you see instead?
Click only....no click and drag
What version of the product are you using? On what operating system?
Current as of may 30 for iPad 3.2
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 31 May 2010 at 3:43
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.