AIM:
To implement Encoder 8 To 3 in Dataflow Modelling using verilog and validating their functionality using their functional tables.
SOFTWARE REQUIRED:
Quartus prime
THEORY
Encoder 8 To 3
The 8 to 3 line Encoder is also known as Octal to Binary Encoder. In 8 to 3 line encoder, there is a total of eight inputs, i.e., D0, D1, D2, D3, D4, D5, D6, and D7 and three outputs, i.e., A0, A1, and A2. In 8-input lines, one input-line is set to true at a time to get the respective binary code in the output side. Below are the block diagram and the truth table of the 8 to 3 line encoder.
Figure 01 Block Diagram of Encoder 8 * 3
Truth Table
The logical expression of the term A0, A1, and A2 are as follows:
A0 = D1 + D3 + D5 + D7
A1 = D2 + D3 + D6 + D7
A2 = D4 + D5 + D6 + D7
Logical circuit of the above expressions is given below:
Figure 02 Encoder 8 * 3
Procedure
PROGRAM
Program for Encoder 8 To 3 in Dataflow Modelling and verify its truth table in quartus using Verilog programming.
Developed by : M.N.SOUNDARIYAN
RegisterNumber : 212222230146
module ENCODER8TO3(a0,a1,a2,d0,d1,d2,d3,d4,d5,d6,d7);
input d0,d1,d2,d3,d4,d5,d6,d7;
output a0,a1,a2;
assign a0 = d1|d3|d5|d7;
assign a1 = d2|d3|d6|d7;
assign a2 = d4|d5|d6|d7;
endmodule
RTL LOGIC FOR Encoder 8 To 3 in Dataflow Modelling
TIMING DIGRAMS FOR Encoder 8 To 3 in Dataflow Modelling
RESULTS
Thus, Encoder 8 To 3 in Dataflow Modelling is implemented using verilog and their functionality using their functional tables have been validated.