- dbm-agent
- 依赖
- 安装
- 初始化
- dbm-agent集成的命令行工具
- 数据库监控网关dbm-monitor-gateway
- 数据库备份代理dbm-backup-proxy
- 启动
- 关闭
- 升级
- 卸载
- 交流与赞助
- 常见问题解答
- 开发文档
dbm 是一个软件套件,包含有 dbm-center 和 dbm-agent 两大组成部分;其中 dbm-center 可以看成一个 web 站点,DBA 通过它可以查看监控、告警、部署各种 MySQL 环境。 dbm-agent 是 dbm-center 的助手,负责环境的部署、监控的采集与上报、数据库的备份与监控。总的来讲接活的 dbm-center 真正干活的是 dbm-agent。另外 dbm-agent 也集成了若干命令行工具,这使得它也可以单独使用。
dbm(DataBase Management center)-agent:MySQL|Redis 数据库管理中心客户端程序
我们希望 DBA 可以从日常的工作中解放出来,做到只要在 web 界面上点一下“同意”系统就能自动、高效、优质的完成所有的操作;同样对于那些我们认为不合理的需求只要点一个“驳回”系统除了向需求方回一个被驳回的响应之外什么都不会干,安静的像一个美男子;更有意思的事,对于所有能用自动化解决的问题,dbm 绝对不会大半夜打 dba 的电话,出现故障自动解决,完成之后记录一下日志就行。
dbm-agent 的工作原理
dbm-agent 是安装在你机器上的一个 python 程序,它可以工作在两个模式
一:守护进程模式,这个模式下它会定时从数据库管理中心(dbm-center)查询要执行的任务,并定时上报一些监控信息到管理中心;管理中心会用这些数据来做预测分析,问题早发现(自动发现),早解决(自动解决),另外管理中心还会用这个来生成报表,一天只要看一眼你对你所管理的数据库便了然于胸。还有另一些情况你可能会打开管理中心的 web 界面,那就是审批了,其它时间喝咖啡去吧!!!
二:命令行模式,这个模式下直接执行 dbm-agent 提供的命令完成操作,相较手工操作这个模式也能极大的提高效率,相对与守护进程模式,它不是 low 了一级别。
dbm-agent 在实现上遵守的规范
规范ID | 规范内容 |
---|---|
dbm-agent 工作目录位置 | /usr/local/dbm-agent |
mysql 配置文件保存的位置 | /etc/my-{port}.cnf |
systemd 配置文件保存的位置 | /usr/lib/systemd/system/mysqld-{port}.service |
数据目录 | /database/mysql/data/{port} |
备份目录 | /backup/mysql/{port} |
binlog目录 | /binlog/mysql/binlog/{port} |
默认密码 | dbma@0352 |
MySQL 安装目录 | /usr/local/ |
MySQL-shell 安装目录 | /usr/local/ |
1、python-3.6.x 及以上版本 dbm-agent 是用 python-3 语法编写的程序
2、centos-7 及以上版本 dbm-agent 在操作系统层面只支持到 centos-7 以上版本的系统(centos8也支持)
3、mysql-8.0.17 及以上版本 个人的精力有限,决定不支持 mysql-8.0.17 以下版本的 MYSQL
4、其它依赖 如果你打算编译安装 python-3 环境,建议在此之前先安装上如下依赖包
yum -y install gcc gcc-c++ libffi libyaml-devel libffi-devel zlib zlib-devel openssl shadow-utils net-tools \
openssl-devel libyaml sqlite-devel libxml2 libxslt-devel libxml2-devel wget vim mysql-devel
安装方法一):源码安装
sudo su
# 安装依赖
pip3 install jinja2 psutil requests mysql-connector-python==8.0.18 distro==1.4.0
# 先手工运行一下自动化测试用例,以确保你的平台有被支持
cd dbm-agent
bash autotest.sh
# 输出大致如下
# ----------------------------------------------------------------------
# Ran 7 tests in 0.098s
#
# OK
python3 setup.py build && python3 setup.py install
# 输出大致如下
#running install_scripts
#copying build/scripts-3.7/dbm-agent -> /usr/local/python/bin
#changing mode of /usr/local/python/bin/dbm-agent to 755
#running install_egg_info
#Writing /usr/local/python/lib/python3.7/site-packages/dbmc_agent-0.0.0.0-py3.7.egg-info
目前 dbm-agent 的开发测试环境为 centos-7.6 + python-3.7.3 ;并且以后也不会兼容 centos-7.0 以下的版本,但是 python 会支持到 python3.6.0
安装方法二):pip3 安装
# 安装 dbm-agent
pip3 install dbm-agent
Installing collected packages: dbm-agent
Running setup.py install for dbm-agent ... done
Successfully installed dbm-agent-0.4.2
如果你是在国内,推荐使用腾讯云的源对 pip 安装进行加速,配置也非常简单一行命令搞定
pip3 config set global.index-url https://mirrors.cloud.tencent.com/pypi/simple
pip3 是 python3 的一个包管理工具,类似于 centos 中的 yum ,另外 dbm-agent 版本号的最后一位是奇数表示它是一个开发版本,偶数表示它是一个稳定版本
要 dbm-agent 能运行起来还要有一些其它的工作要,比如创建 dbma 用户,创建工作目录 /usr/local/dbm-agent 和一些重要的配置文件。作为一个成熟的软件,这一切都是可以自动完成的。
# 由于要创建用户和目录,dbm-agent 需要 root 权限
sudo su
# init ,通过--dbmc-site 选项指定管理端的访问路径、如果你不与 dbm-center 一起使用也可以不加 --dbmc-site
dbm-agent --dbmc-site=https://192.168.100.100 init
#dbm-agent init compeleted .
# 执行完成上面的步骤整个初始化就算完成了,实现上只是创建一些必要的用户,目录,文件
# 初始化会创建 dbm 用户
grep dbm /etc/passwd
dbma:x:2048:2048::/home/dbma:/bin/bash
# 初始化会创建 /usr/local/dbm-agent/ 目录
tree /usr/local/dbm-agent/
├── etc
│ ├── dbma.cnf # dbm-agent 的配置文件
│ ├── init-users.sql # 在初始化数据库里将使用这个文件中的用户名和密码来创建用户
│ └── templates
│ ├── 5_7.cnf.jinja # 未启用
│ ├── 8_0.cnf.jinja # 未启用
│ ├── create-innodb-cluster.js
│ ├── init-users.sql.jinja
│ ├── mysql-8.0.17.cnf.jinja # mysql-8.0.17 版本对应的配置文件模板
│ ├── mysql-8.0.18.cnf.jinja # mysql-8.0.18 版本对应的配置文件模板
│ ├── mysql-8.0-init-only.jinja # 只有初始化时才用到的配置文件
│ └── mysqld.service.jinja # mysql systemd 配置文件模板
├── logs # dbm-agent 的日志文件保存目录(只要有守护进程模式下才会向这时写日志)
└── pkg
├── mysql-8.0.18-linux-glibc2.12-x86_64.tar.xz # 各个软件的安装包(要自己下载并保存到这里,dbm-agent不会自动下载它)
└── mysql-shell-8.0.18-linux-glibc2.12-x86-64bit.tar.gz # 各个软件的安装包(要自己下载并保存到这里,dbm-agent不会自动下载它)
dbm-agent init 时还有几个比较重要的参数
1、 init-pwd 选项,init 的时候 dbm-agent 会创建若干用户(/usr/local/dbm-agent/etc/init-users.sql) 这些用户的密码都用的是 init-pwd 中指定的值。 如果你没有指定,那么它默认取 dbma@0352
2、 dbmc-site 选项,指定数据库管理中心(dbm-center)站点的根路径,如果你目前还不要用上这么高大上的功能,也可以不指定(事实上目前还没有开发完全,我自己也都还没有用)。
再开始使用之前,你还要下载 mysql 和 mysql-shell 的二进制包到 /usr/local/dbm-agent/pkg/ ,这样 dbm-agent 就有能力为你安装&配置各种 MySQL 环境了
dbm-agent 不强求一定要与 dbm-center 配套使用,它自带的命令足够强大,看下面的功能介绍吧。
1、自动安装 MySQL 单机(支持单机多实例)
下面以在本地上安装一个单实例(监听在 3306 端口)为例子
dbma-cli-single-instance --port=3306 install
2019-11-16 21:06:03,729 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller.install - im - INFO - 1115 - execute checkings for install mysql
2019-11-16 21:06:03,756 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._create_mysql_user - im - INFO - 864 - create user 'mysql3306' complete
2019-11-16 21:06:03,757 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._create_data_dir - im - INFO - 888 - create datadir '/database/mysql/data/3306' complete
2019-11-16 21:06:03,758 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._create_binlog_dir - im - INFO - 910 - create binary dir '/binlog/mysql/binlog/3306' complete
2019-11-16 21:06:03,758 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._create_backup_dir - im - INFO - 932 - create backup dir '/backup/mysql/backup/3306' complete
2019-11-16 21:06:03,759 - dbm-agent.dbma.mysqldeploy.MyCnfInitRender.render_template_file - im - INFO - 518 - using template 'mysql-8.0-init-only.jinja'
2019-11-16 21:06:03,759 - dbm-agent.dbma.mysqldeploy.MyCnfInitRender.set_template - im - INFO - 457 - using template file 'mysql-8.0-init-only.jinja'
2019-11-16 21:06:03,806 - dbm-agent.dbma.mysqldeploy.MyCnfInitRender.render - im - INFO - 497 - render mysql config file /tmp/mysql-init.cnf
2019-11-16 21:06:03,806 - dbm-agent.dbma.mysqldeploy.MyCnfInitRender.render_template_file - im - INFO - 524 - render template file complete
2019-11-16 21:06:03,806 - dbm-agent.dbma.mysqldeploy.MyCnfMSRender.render_template_file - im - INFO - 548 - using template 'mysql-8.0.18.cnf.jinja'
2019-11-16 21:06:03,807 - dbm-agent.dbma.mysqldeploy.MyCnfMSRender.set_template - im - INFO - 457 - using template file 'mysql-8.0.18.cnf.jinja'
2019-11-16 21:06:03,845 - dbm-agent.dbma.mysqldeploy.MyCnfMSRender.render - im - INFO - 497 - render mysql config file /etc/my-3306.cnf
2019-11-16 21:06:03,845 - dbm-agent.dbma.mysqldeploy.MyCnfMSRender.render_template_file - im - INFO - 554 - render template file complete
2019-11-16 21:06:03,845 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._render_production_cnf - im - INFO - 956 - render production cnf complete
2019-11-16 21:06:03,846 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._init_database - im - INFO - 1004 - ['/usr/local/mysql-8.0.18-linux-glibc2.12-x86_64/bin/mysqld', '--defaults-file=/tmp/mysql-init.cnf', '--initialize-insecure', '--user=mysql3306', '--init-file=/usr/local/dbm-agent/etc/init-users.sql']
2019-11-16 21:06:10,167 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._init_database - im - INFO - 1011 - init database complete
2019-11-16 21:06:10,170 - dbm-agent.dbma.mysqldeploy.MySQLSystemdRender.render - im - INFO - 666 - render systemd config file complete
2019-11-16 21:06:10,170 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._config_systemd - im - INFO - 1027 - mysql systemd config complete
2019-11-16 21:06:10,355 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._enable_mysql - im - INFO - 1038 - config mysql auto start on boot complete
2019-11-16 21:06:12,386 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._start_mysql - im - INFO - 1068 - start mysql complete
2019-11-16 21:06:12,388 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._export_path - im - INFO - 1078 - export path complete
2019-11-16 21:06:12,389 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._export_header_file - im - INFO - 1106 - export header file complete
2019-11-16 21:06:12,389 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._export_so - im - INFO - 1093 - so file has been exported
2019-11-16 21:06:12,389 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller.install - im - INFO - 1150 - install mysql single instance complete
检查 mysql 数据库是否正常启动
ps -ef | grep mysql
mysql33+ 11672 1 2 21:06 ? 00:00:01 /usr/local/mysql-8.0.18-linux-glibc2.12-x86_64/bin/mysqld --defaults-file=/etc/my-3306.cnf
root 11718 7270 0 21:07 pts/0 00:00:00 grep --color=auto mysql
如果还想在机器上再安装一个 MySQL 呢? 改一下监听的端口就行了,别的都交给 dbm-agent 吧
dbma-cli-single-instance --port=3307 install
2019-11-16 21:11:23,139 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller.install - im - INFO - 1115 - execute checkings for install mysql
2019-11-16 21:11:23,165 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._create_mysql_user - im - INFO - 864 - create user 'mysql3307' complete
2019-11-16 21:11:23,166 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._create_data_dir - im - INFO - 888 - create datadir '/database/mysql/data/3307' complete
2019-11-16 21:11:23,167 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._create_binlog_dir - im - INFO - 910 - create binary dir '/binlog/mysql/binlog/3307' complete
2019-11-16 21:11:23,168 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._create_backup_dir - im - INFO - 932 - create backup dir '/backup/mysql/backup/3307' complete
2019-11-16 21:11:23,169 - dbm-agent.dbma.mysqldeploy.MyCnfInitRender.render_template_file - im - INFO - 518 - using template 'mysql-8.0-init-only.jinja'
2019-11-16 21:11:23,170 - dbm-agent.dbma.mysqldeploy.MyCnfInitRender.set_template - im - INFO - 457 - using template file 'mysql-8.0-init-only.jinja'
2019-11-16 21:11:23,214 - dbm-agent.dbma.mysqldeploy.MyCnfInitRender.render - im - INFO - 497 - render mysql config file /tmp/mysql-init.cnf
2019-11-16 21:11:23,214 - dbm-agent.dbma.mysqldeploy.MyCnfInitRender.render_template_file - im - INFO - 524 - render template file complete
2019-11-16 21:11:23,215 - dbm-agent.dbma.mysqldeploy.MyCnfMSRender.render_template_file - im - INFO - 548 - using template 'mysql-8.0.18.cnf.jinja'
2019-11-16 21:11:23,215 - dbm-agent.dbma.mysqldeploy.MyCnfMSRender.set_template - im - INFO - 457 - using template file 'mysql-8.0.18.cnf.jinja'
2019-11-16 21:11:23,255 - dbm-agent.dbma.mysqldeploy.MyCnfMSRender.render - im - INFO - 497 - render mysql config file /etc/my-3307.cnf
2019-11-16 21:11:23,256 - dbm-agent.dbma.mysqldeploy.MyCnfMSRender.render_template_file - im - INFO - 554 - render template file complete
2019-11-16 21:11:23,256 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._render_production_cnf - im - INFO - 956 - render production cnf complete
2019-11-16 21:11:23,256 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._init_database - im - INFO - 1004 - ['/usr/local/mysql-8.0.18-linux-glibc2.12-x86_64/bin/mysqld', '--defaults-file=/tmp/mysql-init.cnf', '--initialize-insecure', '--user=mysql3307', '--init-file=/usr/local/dbm-agent/etc/init-users.sql']
2019-11-16 21:11:29,590 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._init_database - im - INFO - 1011 - init database complete
2019-11-16 21:11:29,593 - dbm-agent.dbma.mysqldeploy.MySQLSystemdRender.render - im - INFO - 666 - render systemd config file complete
2019-11-16 21:11:29,593 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._config_systemd - im - INFO - 1027 - mysql systemd config complete
2019-11-16 21:11:29,786 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._enable_mysql - im - INFO - 1038 - config mysql auto start on boot complete
2019-11-16 21:11:31,809 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._start_mysql - im - INFO - 1068 - start mysql complete
2019-11-16 21:11:31,812 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._export_path - im - INFO - 1078 - export path complete
2019-11-16 21:11:31,813 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._export_header_file - im - INFO - 1106 - export header file complete
2019-11-16 21:11:31,813 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller._export_so - im - INFO - 1093 - so file has been exported
2019-11-16 21:11:31,813 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller.install - im - INFO - 1150 - install mysql single instance complete
检查两个 MySQL 实例是不是都正常运行
ps -ef | grep mysql
mysql33+ 11672 1 0 21:06 ? 00:00:03 /usr/local/mysql-8.0.18-linux-glibc2.12-x86_64/bin/mysqld --defaults-file=/etc/my-3306.cnf
mysql33+ 11818 1 2 21:11 ? 00:00:01 /usr/local/mysql-8.0.18-linux-glibc2.12-x86_64/bin/mysqld --defaults-file=/etc/my-3307.cnf
root 11863 7270 0 21:12 pts/0 00:00:00 grep --color=auto mysql
还是连接上去看试一下吧,还记得 dbm-agent init 时指定的 init-pwd 参数吗?如果你没有为用户指定这个初始化密码,那么所有的用户密码都会是 dbm@0352
mysql -h127.0.0.1 -P3306 -uroot -pdbma@0352
mysql: [Warning] Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 9
Server version: 8.0.18 MySQL Community Server - GPL
Copyright (c) 2000, 2019, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> select @@version;
+-----------+
| @@version |
+-----------+
| 8.0.18 |
+-----------+
1 row in set (0.00 sec)
想要在性能上对配置文件有所控制?
dbma-cli-single-instance --help
usage: __main__ [-h] [--port PORT] [--pkg PKG] [--max-mem MAX_MEM]
[--cores CORES] [--log {debug,info,warning,error}]
{install,uninstall}
positional arguments:
{install,uninstall}
optional arguments:
-h, --help show this help message and exit
--port PORT instance port # 实例监听的端口,默认 3306
--pkg PKG mysql install package # 指 mysql 安装包
--max-mem MAX_MEM the max memory mysql instances can use # 指定最大可用内存
--cores CORES cpu logic cores # 指定可用核心数
--log {debug,info,warning,error} # 日志级别
dbm-agent 对内存,处理器并不是严格限制的
当一个实例的生命周期已经走到尽头,我们就可以卸载这个实例了,如果你使用 dbm-agent 这一切也都非常简单
1、 dbm-agent 会阻止你卸载一个正在运行的实例
dbma-cli-single-instance --port=3307 uninstall
2019-11-16 21:24:34,555 - dbm-agent - MainThread - INFO - 66 - start uninstall mysqld-3307
2019-11-16 21:24:34,557 - dbm-agent.dbma.mysqldeploy.MysqlUninstaller._basic_checks - um - ERROR - 1169 - port '3307' is in use
2019-11-16 21:24:34,557 - dbm-agent.dbma.mysqldeploy.MysqlUninstaller.uninstall - um - WARNING - 1186 - mysql is runing,want stop it? 'systemctl stop mysqld-3307'
它也给出了提示命令 systemctl stop mysqld-3307 来停止实例的运行
2、 停止实例并卸载
systemctl stop mysqld-3307
dbma-cli-single-instance --port=3307 uninstall
2019-11-16 21:27:28,785 - dbm-agent - MainThread - INFO - 66 - start uninstall mysqld-3307
2019-11-16 21:27:28,787 - dbm-agent.dbma.mysqldeploy.MysqlUninstaller.uninstall - um - INFO - 1196 - start drop instance mysqld-3307
2019-11-16 21:27:28,850 - dbm-agent.dbma.mysqldeploy.MysqlUninstaller.uninstall - um - INFO - 1201 - user 'mysql3307' deleted
2019-11-16 21:27:28,925 - dbm-agent.dbma.mysqldeploy.MysqlUninstaller.uninstall - um - INFO - 1207 - data directory '/database/mysql/data/3307' deleted
2019-11-16 21:27:28,926 - dbm-agent.dbma.mysqldeploy.MysqlUninstaller.uninstall - um - INFO - 1212 - binlog directory '/binlog/mysql/binlog/3307' deleted
2019-11-16 21:27:28,926 - dbm-agent.dbma.mysqldeploy.MysqlUninstaller.uninstall - um - INFO - 1217 - backup direcotry '/backup/mysql/backup/3307' deleted
2019-11-16 21:27:29,061 - dbm-agent.dbma.mysqldeploy.MysqlUninstaller.uninstall - um - INFO - 1230 - drop mysql instance 3307 complete
检查是不是已经卸载了
# 可以看到 3307 已经不存在了(事实上对应的数据、日志、配置、用户都没有了)
ps -ef | grep mysql
mysql33+ 11672 1 0 21:06 ? 00:00:10 /usr/local/mysql-8.0.18-linux-glibc2.12-x86_64/bin/mysqld --defaults-file=/etc/my-3306.cnf
root 11930 11870 0 21:33 pts/0 00:00:00 grep --color=auto mysql
现在 dbm-agent 在备份操作上支持 clone-plugin 之后会支持到 mysqlbackup extrabackup mysqldump 等工具
dbma-cli-clone --host=127.0.0.1 --port=3306 --clone-password=dbma@0352 local-clone
2019-11-16 21:54:15,482 - dbm-agent - MainThread - INFO - 61 - enter local clone logic
2019-11-16 21:54:15,483 - dbm-agent.dbma.mysqldeploy.MySQLCloner.local_clone - cm - INFO - 1448 - start clone mysqld-3306
2019-11-16 21:54:15,483 - dbm-agent.dbma.mysqldeploy.MySQLCloner.local_clone - cm - INFO - 1449 - save backup files to '/backup/mysql/backup/3306/2019-11-16T21:54:15.482956'
2019-11-16 21:54:15,768 - dbm-agent.dbma.mysqldeploy.MySQLCloner.local_clone - cm - INFO - 1475 - locale clone 'mysqld-3306' complete
tree /backup/mysql/backup/3306/2019-11-16T21:54:15.482956
/backup/mysql/backup/3306/2019-11-16T21:54:15.482956
├── #clone
│ ├── #replace_files
│ ├── #status_fix
│ ├── #view_progress
│ └── #view_status
├── ib_buffer_pool
├── ibdata1
├── ib_logfile0
├── ib_logfile1
├── mysql
├── mysql.ibd
├── sys
│ └── sys_config.ibd
├── undo_001
└── undo_002
3 directories, 12 files
总的来说这个是一个相对较大的任务、人工完成会非常的繁琐、但是用 dbm-agent 只要一行命令
假设我们要实现下表这样的一个主从架构,现在 master 已经有了,剩下的就是在 172.16.192.110 上增加一个 slave
IP | PORT | ROLE |
---|---|---|
172.16.192.100 | 3306 | master |
172.16.192.110 | 3306 | slave |
1、 自动搭建 slave
dbma-cli-build-slave --host=172.16.192.100 --port=3306 build-slave
2019-11-17 10:57:40,650 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave.remote_clone - bms - INFO - 1494 - execute checkings for install mysql
2019-11-17 10:57:40,688 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave.install - bms - INFO - 1115 - execute checkings for install mysql
2019-11-17 10:57:40,718 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave._create_mysql_user - bms - INFO - 864 - create user 'mysql3306' complete
2019-11-17 10:57:40,719 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave._create_data_dir - bms - INFO - 888 - create datadir '/database/mysql/data/3306' complete
2019-11-17 10:57:40,720 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave._create_binlog_dir - bms - INFO - 910 - create binary dir '/binlog/mysql/binlog/3306' complete
2019-11-17 10:57:40,721 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave._create_backup_dir - bms - INFO - 932 - create backup dir '/backup/mysql/backup/3306' complete
2019-11-17 10:57:40,721 - dbm-agent.dbma.mysqldeploy.MyCnfInitRender.render_template_file - bms - INFO - 518 - using template 'mysql-8.0-init-only.jinja'
2019-11-17 10:57:40,721 - dbm-agent.dbma.mysqldeploy.MyCnfInitRender.set_template - bms - INFO - 457 - using template file 'mysql-8.0-init-only.jinja'
2019-11-17 10:57:40,762 - dbm-agent.dbma.mysqldeploy.MyCnfInitRender.render - bms - INFO - 497 - render mysql config file /tmp/mysql-init.cnf
2019-11-17 10:57:40,762 - dbm-agent.dbma.mysqldeploy.MyCnfInitRender.render_template_file - bms - INFO - 524 - render template file complete
2019-11-17 10:57:40,763 - dbm-agent.dbma.mysqldeploy.MyCnfMSRender.render_template_file - bms - INFO - 548 - using template 'mysql-8.0.18.cnf.jinja'
2019-11-17 10:57:40,763 - dbm-agent.dbma.mysqldeploy.MyCnfMSRender.set_template - bms - INFO - 457 - using template file 'mysql-8.0.18.cnf.jinja'
2019-11-17 10:57:40,797 - dbm-agent.dbma.mysqldeploy.MyCnfMSRender.render - bms - INFO - 497 - render mysql config file /etc/my-3306.cnf
2019-11-17 10:57:40,797 - dbm-agent.dbma.mysqldeploy.MyCnfMSRender.render_template_file - bms - INFO - 554 - render template file complete
2019-11-17 10:57:40,797 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave._render_production_cnf - bms - INFO - 956 - render production cnf complete
2019-11-17 10:57:40,797 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave._init_database - bms - INFO - 1004 - ['/usr/local/mysql-8.0.18-linux-glibc2.12-x86_64/bin/mysqld', '--defaults-file=/tmp/mysql-init.cnf', '--initialize-insecure', '--user=mysql3306', '--init-file=/usr/local/dbm-agent/etc/init-users.sql']
2019-11-17 10:57:52,606 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave._init_database - bms - INFO - 1011 - init database complete
2019-11-17 10:57:52,609 - dbm-agent.dbma.mysqldeploy.MySQLSystemdRender.render - bms - INFO - 666 - render systemd config file complete
2019-11-17 10:57:52,610 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave._config_systemd - bms - INFO - 1027 - mysql systemd config complete
2019-11-17 10:57:52,775 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave._enable_mysql - bms - INFO - 1038 - config mysql auto start on boot complete
2019-11-17 10:57:54,800 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave._start_mysql - bms - INFO - 1068 - start mysql complete
2019-11-17 10:57:54,802 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave._export_path - bms - INFO - 1078 - export path complete
2019-11-17 10:57:54,808 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave._export_header_file - bms - INFO - 1106 - export header file complete
2019-11-17 10:57:54,809 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave._export_so - bms - INFO - 1093 - so file has been exported
2019-11-17 10:57:54,809 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave.install - bms - INFO - 1150 - install mysql single instance complete
2019-11-17 10:57:54,833 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave.remote_clone - bms - INFO - 1517 - prepare execute 'set @@global.clone_valid_donor_list='172.16.192.100:3306';'
2019-11-17 10:57:54,834 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave.remote_clone - bms - INFO - 1522 - prepare execute 'clone instance from cloneuser@'172.16.192.100':3306 identified by 'dbma@0352';'
2019-11-17 10:57:54,970 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave.remote_clone - bms - INFO - 1526 - got some error during remonte clone 3870 (HY000): Clone Donor plugin group_replication is not active in Recipient.
2019-11-17 10:57:54,971 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave.build_slave - bms - INFO - 1593 - wait mysql protocol avaiable
2019-11-17 10:58:05,996 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave.build_slave - bms - INFO - 1614 - prepare execute 'change master to master_host='172.16.192.100',master_port=3306,master_user='repluser',master_password='dbma@0352',master_ssl = 1,master_auto_position=1;'
2019-11-17 10:58:06,011 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave.build_slave - bms - INFO - 1620 - prepare execute 'start slave;'
2019-11-17 10:58:06,018 - dbm-agent.dbma.mysqldeploy.MySQLBuildSlave.build_slave - bms - INFO - 1632 - rebuild mysql slave complete
1.1、 --host 用于指定 master 所在的主机 IP
1.2、 --port 用于指定 master 所监听的端口
1.3、 自动创建 slave 的过程大致如下
I: 在本地(172.16.192.110)创建一个监听在 --port 上的实例
II: 从 master 克隆数据到本地实例
III: 配置好本地实例与 master 的主从关系
2、 检查主从关系是否正常
mysql -uroot -pdbma@0352 -h127.0.0.1 -P3306
mysql> show slave status \G
*************************** 1. row ***************************
Slave_IO_State: Waiting for master to send event
Master_Host: 172.16.192.100
Master_User: repluser
Master_Port: 3306
Connect_Retry: 60
Master_Log_File: mysql-bin.000002
Read_Master_Log_Pos: 1124
Relay_Log_File: sqlstudio002-relay-bin.000002
Relay_Log_Pos: 400
Relay_Master_Log_File: mysql-bin.000002
Slave_IO_Running: Yes
Slave_SQL_Running: Yes
-- 主从正常
mysql> select * from tempdb.t;
+------+
| x |
+------+
| 100 |
| 200 |
+------+
2 rows in set (0.00 sec)
-- 为了测试我专门在 172.16.192.100 上建立了库表,说明一切正常
以下面三台机器上搭建 MGR 集群为例
IP | 角色 |
---|---|
192.168.100.101 | primary |
192.168.100.102 | secondery |
192.168.100.103 | secondery |
搭建 primary 结点
dbm-agent 在搭建 MGR 时把会 --members 选项中给定的第一个 IP 设置为 primary 其它的都设置为 secondery,所以 IP 地址出现的次序对结果尤为重要;还有另一个次序也同样重要,虽然 primary 结点和 secondery 结点执行的是同一行命令,但是 secondery 结点要克隆 primary 结点的数据,所以要求命令先在 primary 上执行完成后,才能到 scondery 结点上执行。
# 在 192.168.100.101 上执行
dbma-cli-build-mgr --port=3306 --max-mem=128 --members=192.168.100.101,192.168.100.102,192.168.100.103 build-mgr
2019-11-17 11:52:25,266 - dbm-agent - MainThread - INFO - 58 - enter build MGR logic
2019-11-17 11:52:25,266 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR.__init__ - MainThread - INFO - 1674 - using 192.168.100.101:3306 as primary node
2019-11-17 11:52:25,266 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR.__init__ - MainThread - WARNING - 1681 - clone user info user='cloneuser' password='dbma@0352'
2019-11-17 11:52:25,266 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR.__init__ - MainThread - INFO - 1685 - group_replication_group_seeds = 192.168.100.101:33061,192.168.100.102:33061,192.168.100.103:33061
2019-11-17 11:52:25,267 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR.__init__ - MainThread - INFO - 1700 - group_replication_local_address = 192.168.100.101:33061
2019-11-17 11:52:25,267 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR.__init__ - MainThread - INFO - 1704 - current node is primary node? = True
2019-11-17 11:52:25,270 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR.install - imgr - INFO - 1115 - execute checkings for install mysql
2019-11-17 11:52:25,302 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR._create_mysql_user - imgr - INFO - 864 - create user 'mysql3306' complete
2019-11-17 11:53:04,399 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR._extract_install_pgk - imgr - INFO - 842 - extract mysql package completed
2019-11-17 11:53:04,400 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR._create_data_dir - imgr - INFO - 888 - create datadir '/database/mysql/data/3306' complete
2019-11-17 11:53:04,400 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR._create_binlog_dir - imgr - INFO - 910 - create binary dir '/binlog/mysql/binlog/3306' complete
2019-11-17 11:53:04,401 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR._create_backup_dir - imgr - INFO - 932 - create backup dir '/backup/mysql/backup/3306' complete
2019-11-17 11:53:04,402 - dbm-agent.dbma.mysqldeploy.MyCnfInitRender.render_template_file - imgr - INFO - 518 - using template 'mysql-8.0-init-only.jinja'
2019-11-17 11:53:04,402 - dbm-agent.dbma.mysqldeploy.MyCnfInitRender.set_template - imgr - INFO - 457 - using template file 'mysql-8.0-init-only.jinja'
2019-11-17 11:53:04,432 - dbm-agent.dbma.mysqldeploy.MyCnfInitRender.render - imgr - INFO - 497 - render mysql config file /tmp/mysql-init.cnf
2019-11-17 11:53:04,432 - dbm-agent.dbma.mysqldeploy.MyCnfInitRender.render_template_file - imgr - INFO - 524 - render template file complete
2019-11-17 11:53:04,432 - dbm-agent.dbma.mysqldeploy.MyCnfMGRRender.render_template_file - imgr - INFO - 599 - using template 'mysql-8.0.18.cnf.jinja'
2019-11-17 11:53:04,432 - dbm-agent.dbma.mysqldeploy.MyCnfMGRRender.set_template - imgr - INFO - 457 - using template file 'mysql-8.0.18.cnf.jinja'
2019-11-17 11:53:04,462 - dbm-agent.dbma.mysqldeploy.MyCnfMGRRender.render - imgr - INFO - 497 - render mysql config file /etc/my-3306.cnf
2019-11-17 11:53:04,462 - dbm-agent.dbma.mysqldeploy.MyCnfMGRRender.render_template_file - imgr - INFO - 605 - render template file complete
2019-11-17 11:53:04,462 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR._init_database - imgr - INFO - 1004 - ['/usr/local/mysql-8.0.18-linux-glibc2.12-x86_64/bin/mysqld', '--defaults-file=/tmp/mysql-init.cnf', '--initialize-insecure', '--user=mysql3306', '--init-file=/usr/local/dbm-agent/etc/init-users.sql']
2019-11-17 11:53:10,164 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR._init_database - imgr - INFO - 1011 - init database complete
2019-11-17 11:53:10,170 - dbm-agent.dbma.mysqldeploy.MySQLSystemdRender.render - imgr - INFO - 666 - render systemd config file complete
2019-11-17 11:53:10,170 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR._config_systemd - imgr - INFO - 1027 - mysql systemd config complete
2019-11-17 11:53:10,411 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR._enable_mysql - imgr - INFO - 1038 - config mysql auto start on boot complete
2019-11-17 11:53:11,436 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR._start_mysql - imgr - INFO - 1068 - start mysql complete
2019-11-17 11:53:11,438 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR._export_path - imgr - INFO - 1078 - export path complete
2019-11-17 11:53:11,440 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR._export_header_file - imgr - INFO - 1106 - export header file complete
2019-11-17 11:53:11,441 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR._export_so - imgr - INFO - 1091 - export so file complete
2019-11-17 11:53:11,441 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR.install - imgr - INFO - 1150 - install mysql single instance complete
2019-11-17 11:53:11,441 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR.build_primary - imgr - INFO - 1784 - connector to primary node(127.0.0.1:3306) user='dbma' password='dbma@0352'
2019-11-17 11:53:11,467 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR.build_primary - imgr - INFO - 1790 - set @@global.group_replication_bootstrap_group=ON;start group_replication;set @@global.group_replication_bootstrap_group=OFF;
2019-11-17 11:53:11,467 - dbm-agent.dbma.mysqldeploy.MySQLBuildMGR.build_primary - imgr - INFO - 1804 - build MGR primary node complete
mysql -h127.0.0.1 -P3306 -uroot -pdbma@0352 -e"select * from performance_schema.replication_group_members;"
+---------------------------+--------------------------------------+--------------------+-------------+--------------+-------------+----------------+
| CHANNEL_NAME | MEMBER_ID | MEMBER_HOST | MEMBER_PORT | MEMBER_STATE | MEMBER_ROLE | MEMBER_VERSION |
+---------------------------+--------------------------------------+--------------------+-------------+--------------+-------------+----------------+
| group_replication_applier | ba505d15-df87-11e9-9432-000c29f3e728 | mgr192_168_100_101 | 3306 | ONLINE | PRIMARY | 8.0.18 |
+---------------------------+--------------------------------------+--------------------+-------------+--------------+-------------+----------------+
添加第二个结点
# 在 192.168.100.102 上执行
dbma-cli-build-mgr --port=3306 --max-mem=128 --members=192.168.100.101,192.168.100.102,192.168.100.103 build-mgr
... ...
... ...
mysql -h127.0.0.1 -P3306 -uroot -pdbma@0352 -e"select * from performance_schema.replication_group_members;"
+---------------------------+--------------------------------------+--------------------+-------------+--------------+-------------+----------------+
| CHANNEL_NAME | MEMBER_ID | MEMBER_HOST | MEMBER_PORT | MEMBER_STATE | MEMBER_ROLE | MEMBER_VERSION |
+---------------------------+--------------------------------------+--------------------+-------------+--------------+-------------+----------------+
| group_replication_applier | ba505d15-df87-11e9-9432-000c29f3e728 | mgr192_168_100_101 | 3306 | ONLINE | PRIMARY | 8.0.18 |
| group_replication_applier | c47e73dd-df87-11e9-894e-000c290844eb | mgr192_168_100_102 | 3306 | ONLINE | SECONDARY | 8.0.18 |
+---------------------------+--------------------------------------+--------------------+-------------+--------------+-------------+----------------+
添加第三个结点
# 在 192.168.100.103 上执行
dbma-cli-build-mgr --port=3306 --max-mem=128 --members=192.168.100.101,192.168.100.102,192.168.100.103 build-mgr
... ...
... ...
mysql -h127.0.0.1 -P3306 -uroot -pdbma@0352 -e"select * from performance_schema.replication_group_members;"
+---------------------------+--------------------------------------+--------------------+-------------+--------------+-------------+----------------+
| CHANNEL_NAME | MEMBER_ID | MEMBER_HOST | MEMBER_PORT | MEMBER_STATE | MEMBER_ROLE | MEMBER_VERSION |
+---------------------------+--------------------------------------+--------------------+-------------+--------------+-------------+----------------+
| group_replication_applier | ba505d15-df87-11e9-9432-000c29f3e728 | mgr192_168_100_101 | 3306 | ONLINE | PRIMARY | 8.0.18 |
| group_replication_applier | c47e73dd-df87-11e9-894e-000c290844eb | mgr192_168_100_102 | 3306 | ONLINE | SECONDARY | 8.0.18 |
| group_replication_applier | e3eba066-df87-11e9-a9d6-000c29d535bc | mgr192_168_100_103 | 3306 | ONLINE | SECONDARY | 8.0.18 |
+---------------------------+--------------------------------------+--------------------+-------------+--------------+-------------+----------------+
注意事项:
1、我们在三台主机上执行的命令是相同的,对这个就是为了方便 DBA 无脑操作
2、对于自动搭建 MGR 高可用集群来说,你只要保证防火墙是开放的就行,其它的事 dbm-agent 包圆了
第一步: 确保 mysql-shell 的安装包已经下载到本地
ll /usr/local/dbm-agent/pkg/
总用量 526764
-rw-r--r--. 1 root root 503854832 10月 31 16:42 mysql-8.0.18-linux-glibc2.12-x86_64.tar.xz
-rw-r--r--. 1 root root 35547267 10月 31 16:44 mysql-shell-8.0.18-linux-glibc2.12-x86-64bit.tar.gz
第二步:自动化安装 mysql-shell
dbma-cli-install-mysqlsh install-mysqlsh
2019-11-17 13:34:34,464 - dbm-agent - MainThread - INFO - 55 - enter install mysql-shell logic
2019-11-17 13:34:36,062 - dbm-agent.dbma.mysqldeploy.MySQLShellInstaller._extract_install_pkg - imshell - INFO - 1344 - extract mysql-shell complete
2019-11-17 13:34:36,062 - dbm-agent.dbma.mysqldeploy.MySQLShellInstaller._export_path - imshell - INFO - 1359 - mysql-shell path not exported
2019-11-17 13:34:36,063 - dbm-agent.dbma.mysqldeploy.MySQLShellInstaller._export_path - imshell - INFO - 1370 - mysql-shell path exported
2019-11-17 13:34:36,063 - dbm-agent.dbma.mysqldeploy.MySQLShellInstaller._export_path - imshell - INFO - 1372 - export mysql-shell path complete
2019-11-17 13:34:36,063 - dbm-agent.dbma.mysqldeploy.MySQLShellInstaller.install - imshell - INFO - 1395 - install mysql-shell complete
dbm-agent 会把 mysql-shell 也安装到 /usr/local/ 目录下,并且会自动导出 mysqlsh 这个命令
which mysqlsh
/usr/local/mysql-shell-8.0.18-linux-glibc2.12-x86-64bit/bin/mysqlsh
dbm-agent 把一切准备好了,你只要 primary 结点上运行一条简单的命令,一个 innodb-cluster 就出来了
mysqlsh --uri [email protected]:3306 --password=dbma@0352 < /usr/local/dbm-agent/etc/templates/create-innodb-cluster.js
WARNING: Using a password on the command line interface can be insecure.
A new InnoDB cluster will be created based on the existing replication group on instance '127.0.0.1:3306'.
Creating InnoDB cluster 'production' on '127.0.0.1:3306'...
Adding Seed Instance...
Adding Instance 'mgr192_168_23_200:3306'...
Adding Instance 'mgr192_168_23_201:3306'...
Adding Instance 'mgr192_168_23_202:3306'...
Resetting distributed recovery credentials across the cluster...
Cluster successfully created based on existing replication group.
到这里 innodb cluster 就创建完成了(如果你结合 dbm-center 一起使用只要在 web 界面上点一下,所以的操作都是自动的)
由于官方推荐 mysql-router 和应用程序安装在同一台主机上,从这个角度来说 mysql-router 已经不是数据库管理系统要操心的事了,所以 dbm-agent 不实现对 mysql-router的安装。不过有一个惊喜要告诉你,就是 mysql-router 已经被官方打包到了 mysql-server ,也就是说你只要安装好了 mysql-server 就那你就已经有了 mysql-router
第一步: 配置 mysql-router
# 创建 mysqlrouter 的运行用户
useradd router
## 创建用于保存 mysql-router 配置的目录
mkdir /usr/local/routers/
# 调用 --bootstrap 让 mysqlrouter 可以根据实例中 innodb-cluster 的信息完成自我配置(router 这个时候会提示你输入密码要注意了)
# 连接时并不会使用这 root 这里的 root 只是用来给 mysqlrouter 做自动化配置的
mysqlrouter --bootstrap root@localhost:3306 --directory /usr/local/routers/3306 --conf-use-sockets --user=router
# Bootstrapping MySQL Router instance at '/usr/local/routers/3306'...
- Checking for old Router accounts
- No prior Router accounts found
- Creating mysql account 'mysql_router1_9nyhh5odceex'@'%' for cluster management
- Storing account in keyring
- Adjusting permissions of generated files
- Creating configuration /usr/local/routers/3306/mysqlrouter.conf
# MySQL Router configured for the InnoDB cluster 'production'
After this MySQL Router has been started with the generated configuration
$ mysqlrouter -c /usr/local/routers/3306/mysqlrouter.conf
the cluster 'production' can be reached by connecting to:
## MySQL Classic protocol
- Read/Write Connections: localhost:6446, /usr/local/routers/3306/mysql.sock
- Read/Only Connections: localhost:6447, /usr/local/routers/3306/mysqlro.sock
## MySQL X protocol
- Read/Write Connections: localhost:64460, /usr/local/routers/3306/mysqlx.sock
- Read/Only Connections: localhost:64470, /usr/local/routers/3306/mysqlxro.sock
第二步: 启动 mysql-router
cd /usr/local/routers/3306/
ll
总用量 16
drwx------. 2 router router 39 10月 31 17:08 data
drwx------. 2 router router 29 10月 31 17:08 log
-rw-------. 1 router router 1477 10月 31 17:08 mysqlrouter.conf
-rw-------. 1 router router 94 10月 31 17:08 mysqlrouter.key
drwx------. 2 router router 6 10月 31 17:08 run
-rwx------. 1 router router 379 10月 31 17:08 start.sh
-rwx------. 1 router router 179 10月 31 17:08 stop.sh
./start.sh
PID 2949 written to '/usr/local/routers/3306/mysqlrouter.pid'
logging facility initialized, switching logging to loggers specified in configuration
第三步: 检查
netstat -ltpn | grep mysqlrouter
tcp 0 0 0.0.0.0:64460 0.0.0.0:* LISTEN 2949/mysqlrouter
tcp 0 0 0.0.0.0:6446 0.0.0.0:* LISTEN 2949/mysqlrouter
tcp 0 0 0.0.0.0:6447 0.0.0.0:* LISTEN 2949/mysqlrouter
tcp 0 0 0.0.0.0:64470 0.0.0.0:* LISTEN 2949/mysqlrouter
第四步: 对读写功能的检查
对读的检查
# 默认 mysqlrouter 的读端口是 6447
mysql -uappuser -pdbma@0352 -h127.0.0.1 -P6447 -e"select @@server_id"
+-------------+
| @@server_id |
+-------------+
| 641 |
+-------------+
mysql -uappuser -pdbma@0352 -h127.0.0.1 -P6447 -e"select @@server_id"
+-------------+
| @@server_id |
+-------------+
| 879 |
+-------------+
mysql -uappuser -pdbma@0352 -h127.0.0.1 -P6447 -e"select @@server_id"
+-------------+
| @@server_id |
+-------------+
| 641 |
+-------------+
mysql -uappuser -pdbma@0352 -h127.0.0.1 -P6447 -e"select @@server_id"
+-------------+
| @@server_id |
+-------------+
| 879 |
+-------------+
对写的检查
# 默认 mysqlrouter 的写端口是 6446
mysql -uappuser -pdbma@0352 -h127.0.0.1 -P6446 -e"create database tempdb;show databases;select @@server_id;"
+-------------------------------+
| Database |
+-------------------------------+
| information_schema |
| mysql |
| mysql_innodb_cluster_metadata |
| performance_schema |
| sys |
| tempdb |
+-------------------------------+
+-------------+
| @@server_id |
+-------------+
| 1411 |
+-------------+
dbma-cli-mysql-monitor-item 是一个专门用来采集监控项信息的命令行工具,简单,高效。这一切的背后都依靠 数据库监控网关dbm-monitor-gateway 还是先来看一下 dbma-cli-mysql-monitor-item 的使用有多无脑吧
示例1: 查询 3306 实例的 com_select 监控项的值
dbma-cli-mysql-monitor-item --port=3306 com_select
1626
# 由于 --port 的默认值就是 3306 所以可以不指定,那么整个命令都简单了
dbma-cli-mysql-monitor-item com_select
1637
dbma-cli-mysql-monitor-item version
8.0.18
完整的监控项支持列表请参考 数据库监控网关dbm-monitor-gateway 示例2
示例2: 用于 zabbix 的自动发功能
dbma-cli-mysql-monitor-item zabbix
{"data": [{"{#MYSQLPORT}": 3306}, {"{#MYSQLPORT}": 3307}, {"{#MYSQLPORT}": 3308}]}
更多帮助信息
dbma-cli-mysql-monitor-item --help
usage: dbma-cli-mysql-monitor-item [-h] [--port PORT]
[--gateway-port GATEWAY_PORT]
item
positional arguments:
item monitor item name
optional arguments:
-h, --help show this help message and exit
--port PORT mysql listening port
--gateway-port GATEWAY_PORT
monitor gatewy listening port
由于监控是数据库维护中一个非常重要的部分,dbm-agent 于 0.6.0 版本已经把监控整合进来了、这里采用的解决方案是 zabbix
1、 下载 zabbix_agent 的官方安装包
cd /usr/local/dbm-agent/pkg/
wget https://www.zabbix.com/downloads/4.4.4/zabbix_agents-4.4.4-linux3.0-amd64-static.tar.gz
2、 启动安装zabbix-agent程序
dbma-cli-zabbix-agent --pkg=zabbix_agents-4.4.4-linux3.0-amd64-static.tar.gz --server-ip=172.16.192.10 --agent-ip=172.16.192.100 install
2019-12-21 22:10:19,040 - dbm-agent.dbma.zabbixdeploy.ZabbixAgentInstaller.install - iza - INFO - 286 - prepare install zabbix agent using zabbix_agents-4.4.4-linux3.0-amd64-static.tar.gz
2019-12-21 22:10:19,040 - dbm-agent.dbma.zabbixdeploy.ZabbixAgentInstaller._basic_checks - iza - INFO - 97 - all checkings complete
2019-12-21 22:10:19,077 - dbm-agent.dbma.zabbixdeploy.ZabbixAgentInstaller._create_user - iza - INFO - 115 - use 'zabbix' create complete
2019-12-21 22:10:19,141 - dbm-agent.dbma.zabbixdeploy.ZabbixAgentInstaller._render_zabbix_config - iza - INFO - 163 - render mysql config file /usr/local/zabbix_agents-4.4.4-linux3.0-amd64-static/conf/zabbix_agentd.conf
2019-12-21 22:10:19,143 - dbm-agent.dbma.zabbixdeploy.ZabbixAgentInstaller._export_path - iza - INFO - 224 - export path complete
2019-12-21 22:10:19,143 - dbm-agent.dbma.zabbixdeploy.ZabbixAgentInstaller._config_user_parameter - iza - INFO - 242 - config UserParameter complete
2019-12-21 22:10:19,314 - dbm-agent.dbma.zabbixdeploy.ZabbixAgentInstaller._enable_zabbix_agent - iza - INFO - 271 - config zabbix-agent auto start on boot complete
2019-12-21 22:10:19,347 - dbm-agent.dbma.zabbixdeploy.ZabbixAgentInstaller._start_zabbix_agent - iza - INFO - 280 - zabbix-agent start complete
不想每次都指定 IP 地址?那么统一指定网卡名就行 dbma-cli-zabbix-agent --pkg=zabbix_agents-4.4.4-linux3.0-amd64-static.tar.gz --server-ip=172.16.192.10 --net-interface=ens33 install
3、 检查是否安装成功
ps -ef | grep zabbix
zabbix 13534 1 0 22:10 ? 00:00:00 /usr/local/zabbix/sbin/zabbix_agentd --config=/usr/local/zabbix/etc/zabbix_agentd.conf
zabbix 13535 13534 0 22:10 ? 00:00:00 /usr/local/zabbix/sbin/zabbix_agentd: collector [idle 1 sec]
zabbix 13536 13534 0 22:10 ? 00:00:00 /usr/local/zabbix/sbin/zabbix_agentd: listener #1 [waiting for connection]
zabbix 13537 13534 0 22:10 ? 00:00:00 /usr/local/zabbix/sbin/zabbix_agentd: listener #2 [waiting for connection]
zabbix 13538 13534 0 22:10 ? 00:00:00 /usr/local/zabbix/sbin/zabbix_agentd: listener #3 [waiting for connection]
zabbix 13539 13534 0 22:10 ? 00:00:00 /usr/local/zabbix/sbin/zabbix_agentd: active checks #1 [idle 1 sec]
zabbix 13540 13534 0 22:10 ? 00:00:00 /usr/local/zabbix/sbin/zabbix_agentd: active checks #2 [idle 1 sec]
root 13551 8325 0 22:13 pts/1 00:00:00 grep --color=auto zabbix
4、 验证能否成功采集监控项
source /etc/profile
zabbix_get -s 127.0.0.1 -k dbma[basedir,3306]
/usr/local/mysql-8.0.18-linux-glibc2.12-x86_64/
zabbix_get -s 127.0.0.1 -k agent.version
4.4.4
5、 停止与卸载zabbix-agent
# 停止 zabbix-agentd 服务
systemctl stop zabbix-agentd
# 卸载 zabbix-agent
dbma-cli-zabbix-agent uninstall
2019-12-22 11:09:17,359 - dbm-agent.dbma.zabbixdeploy.ZabbixAgentUninstaller.uninstall - uza - INFO - 402 - enter uninstall zabbix logic
2019-12-22 11:09:17,359 - dbm-agent.dbma.zabbixdeploy.ZabbixAgentUninstaller._basic_checks - uza - INFO - 329 - checking zabbix-agentd is runing or not
2019-12-22 11:09:17,360 - dbm-agent.dbma.zabbixdeploy.ZabbixAgentUninstaller._basic_checks - uza - INFO - 354 - all chechkings are ok
2019-12-22 11:09:17,416 - dbm-agent.dbma.zabbixdeploy.ZabbixAgentUninstaller._delete_user - uza - INFO - 366 - delete user complete
2019-12-22 11:09:17,542 - dbm-agent.dbma.zabbixdeploy.ZabbixAgentUninstaller._disable_systemd - uza - INFO - 381 - disable zabbix-agentd complete
2019-12-22 11:09:17,542 - dbm-agent.dbma.zabbixdeploy.ZabbixAgentUninstaller._disable_systemd - uza - INFO - 385 - remove zabbix-agentd.service complete
2019-12-22 11:09:17,544 - dbm-agent.dbma.zabbixdeploy.ZabbixAgentUninstaller._remove_link - uza - INFO - 395 - remove link file complete
2019-12-22 11:09:17,544 - dbm-agent.dbma.zabbixdeploy.ZabbixAgentUninstaller.uninstall - uza - INFO - 416 - uninstall zabbix-agent complete
监控网关是安装在主机上的一个守护进程,当 dbm-agent 安装并初始化完成之后会就自动的运行在后台了,这个守护进程有如下特点:
1、 它能自动的感知到当前主机上安装有哪些 MySQL 实例
2、 为每一个实例分配一个线程(用于采集监控项)
3、 监控网关到数据库的连接使用的是长连接,一次查询所有的监控项,并缓存到内存中
4、 以 RESTful-API 的形式暴露出接口,方便其它程序使用
192.168.100.100 主机上安装有 3 个 mysql 实例,监控网关采集这三个实例上的所有(几乎是所有)监控项供其它程序查询
5、 RESTful API 列表
路径 | 备注 |
---|---|
http://127.0.0.1:8080/instances/ | 查询当前主机上的所有 MySQL 实例 |
http://127.0.0.1:8080/instances/int:port | 查询 port 实例的所有监控项 |
http://127.0.0.1:8080/instances/int:port/str:monitorItemName | 查询 port 实例的 monitorItemName 监控项的值 |
示例1:查询当前主机上有哪些实例
curl http://127.0.0.1:8080/instances/
[3306, 3307, 3308]
示例2:查询 3306 实例的所有监控项的值
curl http://127.0.0.1:8080/instances/3306/
{
"aborted_clients": "8",
"aborted_connects": "145",
"acl_cache_items_count": "0",
"binlog_cache_disk_use": "0",
"binlog_cache_use": "0",
"binlog_stmt_cache_disk_use": "0",
"binlog_stmt_cache_use": "0",
"bytes_received": "444873",
"bytes_sent": "51774593",
"file": "mysql-bin.000001",
... ... ... ...
"position": 151,
"binlog_do_db": "",
"binlog_ignore_db": ""
}
# 支持 1000+ 的监控维度,可以说是非常丰富了
示例3: 查询 3306 实例的 MySQL 版本号
curl http://127.0.0.1:8080/instances/3306/version
{
"version": "8.0.18"
}
6、 监控网关的维护操作
# 方法一 通过检查进程是否存在
ps -ef | grep dbm-monitor-gateway
dbma 12363 1 0 18:31 ? 00:00:10 /usr/local/python-3.6.0/bin/python3.6 /usr/local/python-3.6.0/bin/dbm-monitor-gateway
--monitor-user=monitor --monitor-password=dbma@0352 --bind-ip=127.0.0.1 --bind-port=8080 start
# 方法二 通过检查服务的状态
systemctl status dbm-monitor-gatewayd
● dbm-monitor-gatewayd.service - dbm monitor gateway
Loaded: loaded (/usr/lib/systemd/system/dbm-monitor-gatewayd.service; enabled; vendor preset: disabled)
Active: active (running) since 六 2019-12-21 17:09:40 CST; 2h 42min ago
Process: 12352 ExecStop=/usr/local/python-3.6.0/bin/dbm-monitor-gateway stop (code=exited, status=0/SUCCESS)
Main PID: 12363 (dbm-monitor-gat)
CGroup: /system.slice/dbm-monitor-gatewayd.service
└─12363 /usr/local/python-3.6.0/bin/python3.6 /usr/local/python-3.6.0/bin/dbm-monit...
12月 21 17:09:40 mgr172_16_192_100 systemd[1]: Started dbm monitor gateway.
由于 dbm-monitor-gateway 是一个服务,所以你按一个服务的标准去操作它就行
# 关闭
systemctl stop dbm-monitor-gatewayd
# 启动
systemctl start dbm-monitor-gatewayd
备份作为一个直接关系到 dba 饭碗的事,dbm-agent 把它放到了一个单独的进程当中去实现;就目前来讲它封装了 mysqldump
这个逻辑备份工具和 mysqlbackup
这个官方的企业级的物理备份工具。
为了尽可能不要让 dba 操心,dbm-backup-proxy 备份计划都自己定了。 1、优先使用 mysqlbackup 做物理备份 2、每周一次全备+每天一次差异备份(有全备的那天不执行差异备份) 3、在 mysqlbackup
不存在的情况下降级到 mysqldump
备份(这种情况下每天都有一次全备)
1、 启动备份服务
想把备份任务全权交给 dbm-backup-proxy 了吗?做法非常的简单把这个进程启动就行了
# 初始化完成之后 dbm-agent 会自动创建 dbm-backup-proxyd 这个服务的
systemctl start dbm-backup-proxyd
当然你手工启动这个进程也是可以的
dbm-backup-proxy start
Successful start and log file save to '/usr/local/dbm-agent/logs/dbm-bacukp-proxy.log'
检查进程是否运行
ps -ef | grep dbm
dbma 3023 1 0 16:51 ? 00:00:00 /usr/local/python-3.8.1/bin/python3.8 /usr/local/python/bin/dbm-backup-proxy start
# 虽然 dbm-backup-proxy 要求以 root 身份启动,但是它的绝大多数时间还是以 dbma 这个身份运行,注意它也是一个守护进程
当这个进程运行起来之后,对主机上所有 mysql 数据库进行备份这个事就它就会自动的去完成了,dba 喝咖啡去吧。
2、 检查备份是否成功
默认备份的文件会保存在 /backup/mysql/backup/{port}/
目录下
我当前的主机上运行着 3306 & 3307 两个实例
ps -ef | grep mysql
mysql33+ 1037 1 0 14:36 ? 00:01:13 /usr/local/mysql-8.0.19-linux-glibc2.12-x86_64/bin/mysqld --defaults-file=/etc/my-3306.cnf
mysql33+ 1040 1 0 14:36 ? 00:01:15 /usr/local/mysql-8.0.19-linux-glibc2.12-x86_64/bin/mysqld --defaults-file=/etc/my-3307.cnf
那么 3306 实例的备份文件就应该在 /backup/mysql/backup/3306/
目录下
tree /backup/mysql/backup/3306/
/backup/mysql/backup/3306/
└── 2020-7
├── 2020-02-16T16:49:04.894522-full-backup.mbi
├── 2020-02-16T16:49:04.894522.log
├── binlog-position.log
└── mysqlbackup-progress.log
1 directory, 4 files
dbm-agent 默认会自动以守护进程的方式运行
由于 dbm-center 到目前为止还是一个 beta 版本,
1、 启动
dbm-agent start
Successful start and log file save to '/usr/local/dbm-agent/logs/dbma.log'
启动完成之后 dbm-agent 会以守护进程的方式在后台运行,周期性的上报主机的性能指标到服务端(dbm-center),并从 dbm-center 检查要执行的任务(任务是一个抽象的概念,任何之前需要 DBA 手工执行的操作都可以看成一个任务)
-- 更多其它方面的监控请查看 dbm-center 这个项目
mysql> select * from hosts_cputimesmodel order by id limit 23,17;
+----+----------------------------+-------+--------+-------+-------+--------+-------+---------+---------+
| id | create_time | user | system | idle | nice | iowait | irq | softirq | host_id |
+----+----------------------------+-------+--------+-------+-------+--------+-------+---------+---------+
| 24 | 2019-10-03 18:37:41.849744 | 0.007 | 0.005 | 0.989 | 0.000 | 0.000 | 0.000 | 0.000 | 2 |
| 25 | 2019-10-03 18:38:42.902971 | 0.006 | 0.005 | 0.989 | 0.000 | 0.000 | 0.000 | 0.000 | 2 |
| 26 | 2019-10-03 18:39:35.405399 | 0.007 | 0.005 | 0.988 | 0.000 | 0.000 | 0.000 | 0.000 | 2 |
| 27 | 2019-10-03 18:40:35.487535 | 0.007 | 0.005 | 0.988 | 0.000 | 0.000 | 0.000 | 0.000 | 2 |
| 28 | 2019-10-03 18:41:35.574100 | 0.007 | 0.005 | 0.988 | 0.000 | 0.000 | 0.000 | 0.000 | 2 |
| 29 | 2019-10-03 18:43:44.879151 | 0.007 | 0.005 | 0.988 | 0.000 | 0.000 | 0.000 | 0.000 | 2 |
| 30 | 2019-10-03 18:44:44.988876 | 0.007 | 0.005 | 0.988 | 0.000 | 0.000 | 0.000 | 0.000 | 2 |
| 31 | 2019-10-03 18:45:45.017535 | 0.007 | 0.005 | 0.988 | 0.000 | 0.000 | 0.000 | 0.000 | 2 |
| 32 | 2019-10-03 18:46:45.042812 | 0.007 | 0.005 | 0.988 | 0.000 | 0.000 | 0.000 | 0.000 | 2 |
| 33 | 2019-10-03 18:47:45.086554 | 0.007 | 0.005 | 0.988 | 0.000 | 0.000 | 0.000 | 0.000 | 2 |
| 34 | 2019-10-03 18:48:45.146277 | 0.007 | 0.005 | 0.988 | 0.000 | 0.000 | 0.000 | 0.000 | 2 |
| 35 | 2019-10-03 18:49:45.227072 | 0.007 | 0.005 | 0.988 | 0.000 | 0.000 | 0.000 | 0.000 | 2 |
| 36 | 2019-10-03 18:50:45.263859 | 0.007 | 0.005 | 0.988 | 0.000 | 0.000 | 0.000 | 0.000 | 2 |
| 37 | 2019-10-03 18:51:45.360525 | 0.007 | 0.005 | 0.988 | 0.000 | 0.000 | 0.000 | 0.000 | 2 |
| 38 | 2019-10-03 18:52:45.437180 | 0.007 | 0.005 | 0.989 | 0.000 | 0.000 | 0.000 | 0.000 | 2 |
| 39 | 2019-10-03 18:53:45.464134 | 0.007 | 0.005 | 0.989 | 0.000 | 0.000 | 0.000 | 0.000 | 2 |
+----+----------------------------+-------+--------+-------+-------+--------+-------+---------+---------+
16 rows in set (0.00 sec)
--
2、 观察进程的运行状态
ps -ef | grep dbm
dbma 7225 1 0 11:31 ? 00:00:00 /usr/local/python-3.7.3/bin/python3.7 /usr/local/python/bin/dbm-agent start
root 7229 7167 0 11:32 pts/0 00:00:00 grep --color=auto dbm
3、 dbm-agent 的日志保存在 /usr/local/dbm-agent/logs/dbma.log 文件中
cat /usr/local/dbm-agent/logs/dbma.log
2019-08-31 07:57:08,409 - dbm-agent.server - MainThread - INFO - dbm-agent starting
关闭 dbm-agent 守护进程
dbm-agent stop
Successful exit
升级 dbm-agent 要分两步走
# 第一步:升级软件
dbm-agent stop
pip3 install dbm-agent
# 第二步:升级配置文件
dbm-agent upgrade
2019-09-16 16:47:49,328 INFO going to upgrade dbm-agent
2019-09-16 16:47:49,329 INFO backup etc/templates
2019-09-16 16:47:49,329 INFO create new etc/templates
2019-09-16 16:47:49,333 INFO upgrade complete
卸载 dbm-agent 要分两步走、第一步:删除 dbm-agent 对应的用户和数据 第二步:卸载 dbm-agent 软件包
# uninit 会自动完成相关用户(dbma)和数据(/usr/local/dbm-agent/)的删除
dbm-agent uninit
# 卸载 dbm-agent
pip3 uninstall dbm-agent
如果这个程序对你有帮助、不介意的话可以打赏一杯咖啡(24¥ ~ 32 ¥)让我写代码的时候更加有精神、不容易出 bug ,技术交流也同样欢迎。
技术交流 | 投币 | 投币 |
---|---|---|
![]() |
![]() |
1、 无法识别的安装包
2019-11-22 10:10:37,518 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller.run - im - ERROR - 1438 -
exception occur during install mysql single instance Unknown archive format '/usr/local/dbm-agent/pkg/mysql-8.0.18-linux-glibc2.12-x86_64.tar.xz'
原因:在编译安装 python-3.x.y 的时候缺少依赖,安装上如下依赖后再一次编译安装 python-3.x.y (这个问题在文档中依赖那一节有提到的)
yum -y install gcc gcc-c++ libffi libyaml-devel libffi-devel zlib zlib-devel openssl shadow-utils \
openssl-devel libyaml sqlite-devel libxml2 libxslt-devel libxml2-devel wget vim mysql-devel
2、 找不到模板文件
dbma-cli-single-instance --port=3306 --max-mem=128 install
2020-01-15 10:48:35,172 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller.install - im - INFO - 1115 - execute checkings for install mysql
2020-01-15 10:48:35,176 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller.basic_checks - im - ERROR - 795 - config file template '/usr/local/dbm-agent/etc/templates/mysql-8.0.19.cnf.jinja' not exists
2020-01-15 10:48:35,176 - dbm-agent.dbma.mysqldeploy.SingleInstanceInstaller.install - im - ERROR - 1119 - /usr/local/dbm-agent/etc/templates/mysql-8.0.19.cnf.jinja
比如 dbm-agent-0.6.7 开始支持 mysql-8.0.19 ,如果你只是把 dbm-agent 软件包更新到了 0.6.7 而不执行 dbm-agent upgrade
它是不会导出模板的;所以为了解决这个问题我们要执行 upgrade 操作。
dbm-agent upgrade
2020-01-15 10:48:43,823 INFO going to upgrade dbm-agent
2020-01-15 10:48:43,823 INFO backup etc/templates
2020-01-15 10:48:43,824 INFO create new etc/templates
2020-01-15 10:48:43,835 INFO prepare rende init-sql-file /usr/local/dbm-agent/etc/init-users.sql
2020-01-15 10:48:43,836 INFO init-sql-file render complete
2020-01-15 10:48:43,836 DEBUG sudo context config dbm-monitor-gateway
2020-01-15 10:48:44,035 INFO monitor-gateway render complete
2020-01-15 10:48:44,053 INFO upgrade complete
合并代码前请确保你有给你的代码编写测试代码,并保证测试是通过的。目前 dbm-agent 的测试可以在 docker 中完成。
第一步:启动 docker 镜像
cd dbm-agent
bash dev-docker.sh
Sending build context to Docker daemon 5.369MB
Step 1/4 : FROM 1721900707/dbma:0.0.1.0
---> 8621ee54295a
Step 2/4 : MAINTAINER [email protected]
---> Running in fb35177fdc23
Removing intermediate container fb35177fdc23
---> 43fc72e2424a
Step 3/4 : ADD . /tmp/
---> 73e5a4c84b2d
Step 4/4 : CMD python3 --version
---> Running in 4a5af95857c7
Removing intermediate container 4a5af95857c7
---> 918f74aa72df
Successfully built 918f74aa72df
Successfully tagged 1721900707/dbma:0.0.1.0
[root@d5cae0c6edf3 tmp]#
第二步:运行自动化测试用例
bash autotest.sh -v
----------------------------------------------------------------------
Ran 30 tests in 0.407s
OK