skot / bitaxehex Goto Github PK

is it possible to add the 3d model of the PCB assembled with all these components in order to draw (step) the box with the cooling circuit?

footprint is 1206, part is 0805

Need to add fiducials for manufacturing.

The ESP32 measures the ASIC core voltage (TPS40305 output) via an ADC pin. 4.5V is too high to measure directly. put a voltage divider in there.

the BM1366 wants 1.2V core voltage. for 3 in series this should be 3.6V.

the easy way to do this is change R10 from 1.54k -> 2k in the TPS40305 feedback circuit

USB-C plug enclosures can be pretty chunky sometimes. I think we need some more clearance between the USB-C receptacle and the ESP32. Especially if anyones uses the built-in antenna variant.

C15 part is 0402 and should be 0805.

it should also be a little higher voltage. BP is 6V and the part is rated for 10V

they even make cool colored screws;

datasheet

As this would be a perfect Rig for PV powered mining wouldn't it be a good idea to have a greater Voltage In Range so that it could be powered from a 24 Volt Solar System? In this system you would have lower amps and it would have a better overall performance.

it's currently rated for 16V, which is very close to the nominal 12V and no good for 20V..

5V isn't ideal for bigger fans

can we spread the mounting holes of the PCB Heatsink from 60.5 mm to 59,5 mm. there is a high risk of breaking the drill bit when drilling.

thanks to DevJune on OSMU