siruli / froniussmartmeter Goto Github PK

When my battery is empty, my Multiplus turmes off to reduce standby Power usage.
When this is the case, vrm Stopps showing grid measurements with this plugin.
Older (other) plugin kept sending values.

Since I installed this service, the flow screen shows 3 phases, even on the AC Loads icon, but my system is single phase. My Fronius Smart Meter is 63A-1, it shows 3 phases unnecessarily, two of them always at 0 W. Is it possible to show it as single phase? thanks

Hi,

I am new to github and not familiar with python nor programming. I ran FroniusSmartmeter service installed through setup helper over 2 months without problem. After updating to venus 2.93 service started to crash.
I tried following:
root@raspberrypi2:/data/FroniusSmartmeter# svstat /service/FroniusSmartmeter
/service/FroniusSmartmeter: up (pid 9850) 1 seconds
root@raspberrypi2:/data/FroniusSmartmeter# python3 /data/FroniusSmartmeter/fronius-smartmeter.py
Traceback (most recent call last):
File "/data/FroniusSmartmeter/fronius-smartmeter.py", line 39, in
from vedbus import VeDbusService, VeDbusItemImport
ModuleNotFoundError: No module named 'vedbus'

svstat always retunns value less than 3 seconds and running fronius-smartmeter.py gives above error.

I do not want to go back to v 2.92. Can you give me any hint how to proceed. Thank you.

The output in the console alternates between "not connected" and just "w".

This directory is not present so i get not output there.
svstat /service/victron-dbus-fronius-smartmeter

The IP is detected correct.

The version of RalfZim works, but i wanted
to use the update features of the setuphelper.

any hints what to do?

Summary

I run 2 Fronius Symo in my home network. They are not connected together, only connected to my network.
Only one of them has a Smartmeter connected to it. The inverter with the SmartMeter has the Inverter Number '2'. There are 2 existing IP-Adresses for this inverter, one for ethernet (cable), the other one for the WLAN interface.
The one without the SmartMeter has the inverter number '1'.

Sometimes it seems as if the script identifies the wrong inverter as the source for its SmartMeter Readings.

In the Readme, it is specified to start the script with --ip xxx.xxx.xxx.xxx - But where exactly can i specify this option?

Issue Type

Feature Idea

Additional Information

No response

Summary

Hello, I had an heat issue with 63A-3 Smartmeter and it was replaced with TS65-3. In the Fronius app all works fine. I didn't change anything on the settings. Modbus settings and ip adress didn't change.
I tried to reinstall venus os and the Smartmeter package, but the value for the grid measurement is also not visble.
There is no entry on the device list.

Issue Type

Bug Report

FroniusSmartmeter Version

```TS65A-3


### Steps to Reproduce

Installed the setup helper and the smart meter package.If i run:

python /data/FroniusSmartmeter/fronius-smartmeter.py

This is what is given back

Traceback (most recent call last):
  File "/data/FroniusSmartmeter/fronius-smartmeter.py", line 373, in <module>
    main()
  File "/data/FroniusSmartmeter/fronius-smartmeter.py", line 361, in main
    pvac_output = DbusFroniusService(
  File "/data/FroniusSmartmeter/fronius-smartmeter.py", line 134, in __init__
    data["Details"]["Manufacturer"] + " " + data["Details"]["Model"],
KeyError: 'Details'


### Expected Results

I expected that if I do a freh setup of the system, the smartmter will be recognized by the skript?

### Actual Results

Not working