sinnerkuma / lpntpm-lpc-verilog

Intro

This is FPGA based implementation of Low Pint Count (LPC) protocol written in Verilog HDL language. The implementation is based on OpenCores by Howard M. Marte.

Such subset of LPC protocol cycles are supported:

• I/O Read and Write (1-byte)
• TPM cycle Read and Write (1-byte)

All sources are written in Verilog and could be synthesized in open-source tools for example Symbiflow.

It can be also easily simulated in open-source Verilog simulator - Icarus Verilog and visualized in the GTKWave.

Simulation

Prerequisites

Here is short tutorial how to simulate LPC Peripheral using the Icarus Verilog and GTKWave packages.

First of all we, have to install Icarus Verilog package in your Linux distribution. One can succeed this task in two ways:

• installation from sources
• installation from package repository

You can also start with a short tutorial showing how to perform basic tasks in the Icarus Verilog tool.

After installation is done, we can try to run simulation of Verilog sources. Apart from making sources for Verilog module, making test-bench in Verilog is a must. So summing it up, we need to have two Verilog files:

• tested module sources
• test-bench with stimulus for tested package

Running simulation

1. Create catalog for sources files, for example:

mkdir test
cd test

2. Clone this repository:

git clone https://github.com/lpn-plant/lpntpm-lpc-verilog.git

4. Now we can compile the Verilog module (source) to a format which Verilog simulator understands:

iverilog -o lpc_peri_module lpc_periph_tb.v lpc_periph.v lpc_host.v lpc_defines.v

It is likely that one can see a few warnings - these are not that important right now and we can just skip them

5. After compilation has ended, we can use vvp tool to generate the .vcd file with timing simulation content:

vvp -nv lpc_peri_module

You should see similar output from tool:

Compiling VVP ...
 ... VVP file version 10.3 (stable)
Compile cleanup...
 ... Linking
 ... Removing symbol tables
 ... Compiletf functions
 ...      393 functors (net_fun pool=524288 bytes)
                261 logic
                  1 bufif
                  1 resolv
                 55 signals
 ...      378 filters (net_fil pool=524288 bytes)
 ...     1329 opcodes (49152 bytes)
 ...      113 nets
 ...      393 vvp_nets (1048544 bytes)
 ...        0 arrays (0 words)
 ...        2 memories
                  2 logic (40 words)
                  0 real (0 words)
 ...        4 scopes
 ... 0.023095 seconds, 16048.0/7420.0/4992.0 KBytes size/rss/shared
Running ...
 ...execute EndOfCompile callbacks
 ...propagate initialization events
 ...execute StartOfSim callbacks
 ...run scheduler
VCD info: dumpfile lpc_peri_tb.vcd opened for output.
 ...execute Postsim callbacks
 ... 0.135149 seconds, 16048.0/7420.0/4992.0 KBytes size/rss/shared
Event counts:
       13946 time steps (pool=128)
       34643 thread schedule events
       44479 assign events
             ...assign(vec4) pool=9362
             ...assign(vec8) pool=204
             ...assign(real) pool=256
             ...assign(word) pool=128
             ...assign(word/r) pool=204
      147768 other events (pool=4096)

As a result, lpc_periph_tb.vcd file containing simulation results (timing diagrams) will be produced.

5. To see simulation results in graphical tool:

gtkwave lpc_periph_tb.vcd

6. After GTKWavehas started, go to the left upper window and click on cross sign left from lpc_peri_tb as on the below screenshot.

7. Then, we can click on names of modules (lpc_host, lpc_peri).

8. In a window below, we can see instance signals (ports).

9. Double click on signal name moves it to window titled Signals.

All signal which are in window Signals are displayed in the simulation window called Waves (timing diagrams).

10. After we collected signals we want to watch in the Signal window, we click fourth icon from left (below main program menu) and next plus and minus signs icons in order to set proper time settings. We can also change the figure of particular signal in list using right mouse button.

11. After selection of signals and setting proper timing values, we should see picture similar to the one below.