shiruken / hackintosh Goto Github PK

Hi, from your parts I dont see you use any external wifi card? May I know how did you get the WiFi working from existing parts? The additional WiFi card can only work for bluetooth I believe.

You can try it

Attempts to enable System Integrity Protection (SIP) by setting CsrActiveConfig=0x00 have been unsuccessful. Whenever the parameter is changed from 0x67 (SIP disabled), the system encounters memory allocation errors after entering the password during FileVault2 preboot. Restoring this setting allows the system to operate as expected.

Setting the desktop background to a dynamic wallpaper results in a graphical glitch that extends across much of the screen. This occurs regardless of selecting the "dynamic" or "still" options for the wallpaper. There is no apparent solution other than selecting a standard desktop image. The issue appears to be related to the AMD Radeon 5700 XT graphics card.

Hi @shiruken,

Thanks for putting this together! It's really thorough and understandable (a feat in and of itself, especially amongst the hackintosh community).

Where did you get the graphic for your motherboard? I'd like to do a mapping like this for my GA-AORUS-Z270-Gaming-8.

Thanks!

Hi @shiruken 👋.
Thank you so much for your work and for sharing. 🚀

• Does your build work for 100%?
• I am going to build a hackintosh. Would you recommend me to buy 1/1 configuration like yours?
  Or maybe something different?

I’m planning an extremely similar build with one significant difference (I’m converting an existing windows build):

I’ve got a 9700KF and therefore no iGPU

Will I be fine to inject the kexts for my 5600 XT for the initial install?

I have not tried directly from windows yet. I use exactly same mobo as yours but no WIFI at all. I have same build as yours. I don't see you installed any wifi driver. Any suggestion here?

Thanks for your awesome works! Sorry for my bad english...
I create USB installation and copy your EFI_install contents to my EFI volume. When plug into USB 2.0 ports, ports limit reached. When plug into USB 3.0 ports, other issues happened..., Please help!

I have an almost identical build to yours. Have been following your repo for a while now, to compare when I run into errors. I've been really struggling with macos 12.6. I'm getting this weird issue where after running perfect for a while everything slowly runs to a halt. I've done all the debuggingI can, i'm about ready to just clean wipe and start over.

Just curious if there's a reason you are still on 12.5? Did I miss some warnings about 12.6? What are your thoughts about upgrading to ventura?

Appreciate this awesome repo, let me know if I can help contribute at all.

Since upgrading to macOS Monterey, boot times have increased considerably to several minutes. I originally attributed this to problems with Bluetooth in the latest version of macOS (#13), however it appears that the actual culprit may be the Samsung Evo 970 SSD used as my boot drive. There are outstanding issues with TRIM on Samsung SSDs that seem to have been exasperated by macOS Monterey.

It is unclear why exactly this is resulting in longer boot times since my configuration has SetApfsTrimTimeout=-1, which should result in the standard timeout of ~10 seconds. However, this comes with the risk of not completing the full TRIM operation and could put additional wear on the drive.

See Also:

• SSD hall of fame needs new entries
• tonymacx86: General NVMe Drive Problems (Fatal)
• tonymacx86: Extremely slow 6-7 minute boot time with Monterey 12.0.1

There are currently issues with Bluetooth in macOS Monterey with this configuration. Bluetooth cannot be turned off from Control Center and the System Preferences pane cannot be loaded. It also appears that Bluetooth is significantly slowing down system launch (now takes several minutes).

The OpenIntelWireless team indicates that additional steps must be taken to make Bluetooth work in macOS Monterey when using IntelBluetoothFirmware. This includes adding BlueToolFixup.kext from acidanthera/BrcmPatchRAM to the configuration (see 9ef0af4).

However, there are still outstanding issues with BlueToolFixup in macOS Monterey that appear to be related to the problems I have encountered. Since the slow boot time is a minor inconvenience and I rarely use Bluetooth peripherals on my system, I will not be removing it from my configuration at this time in hopes of a quick fix. However, if you want to avoid the instability caused by this issue, simply disable IntelBluetoothFirmware by removing it from your OC config.

This is an amazing guide. Thanks for putting it together. I'm getting ready to build my first Hackintosh and had a quick question. Would it be possible to use a SSD instead of an M.2 drive for the windows install? If so, would there be any changes in the installation process?

Hello I got at error ""An Error Occurred Preparing the Software Update" when install

After upgrading to macOS Ventura 13.0.1 3ed26ca, the system now exhibits instability related to sleep. When the screen saver or display sleep activates, the system will freeze and reboot return to the login screen. Note: The system is not fully rebooting (i.e. not seeing BIOS screen).

In lieu of diagnosing the underlying issue, a temporary fix seems to be enabling the "Prevent automatic sleeping when the display is off" setting under Displays > Advanced... in System Settings. (Why is this setting located here?)

It is unclear how the Lock Screen settings for "Start Screen Saver when inactive" and "Turn display off when inactive" influence this problem. A preliminary test shows that the screen saver starting at all will result in the system reboot.

Hey again, how's bluetooth working for you?

I've found that if i turn it off, it won't come back on. I'm also having issues pairing.

Have you had success using Airdrop, Sidecar or Continuity(using iPhone as a webcam)?

Hi Colin, I have almost a similar build to yours except that I have a Z370 Gaming Pro Carbon motherboard.
Do you know if your current files will work on a Z370 or if will there be much to modify? Thanks

This Repository was really useful and it helped me a lot!
I just have a short hint:
The internal USB 3.0 connector that is named HS/SS 10 is a double USB head for HS/SS 10 and 09.