This assumes that you have python3 installed. (we are using 3.4 but this should work for most python 3 versions)
-
Clone the project by entering
git clone [email protected]:SeoulMate/seoulmate_web.git
in the terminal- This will create a folder called
seoulmate_web
where you ran the command
- This will create a folder called
-
Create a virtualenv by creating a new folder
mkdir virtualenvironments
and going into that foldercd virtualenvironments
-
Create the virtual environment (mostly copied from the django girls tutorial)
Before we install Django we will get you to install an extremely useful tool to help keep your coding environment tidy on your computer. It's possible to skip this step, but it's highly recommended. Starting with the best possible setup will save you a lot of trouble in the future!
So, let's create a virtual environment (also called a virtualenv). Virtualenv will isolate your Python/Django setup on a per-project basis. This means that any changes you make to one website won't affect any others you're also developing. Neat, right?
All you need to do is find a directory in which you want to create the
virtualenv
; your home directory, for example. On Windows it might look likeC:\Users\Name\
(whereName
is the name of your login).cd seoulmate_web
We will make a virtualenv called
smvenv
. The general command will be in the format:python3 -m venv smvenv
To create a new
virtualenv
, you need to open the console (we told you about that a few chapters ago - remember?) and runC:\Python34\python -m venv smvenv
. It will look like this:C:\Users\Name\seoulmate_web> C:\Python34\python -m venv smvenv
where
C:\Python34\python
is the directory in which you previously installed Python andsmvenv
is the name of yourvirtualenv
. You can use any other name, but stick to lowercase and use no spaces, accents or special characters. It is also good idea to keep the name short - you'll be referencing it a lot!Creating a
virtualenv
on both Linux and OS X is as simple as runningpython3 -m venv smvenv
. It will look like this:~/seoulmate_web$ python3 -m venv smvenv
smvenv
is the name of yourvirtualenv
. You can use any other name, but stick to lowercase and use no spaces. It is also good idea to keep the name short as you'll be referencing it a lot!NOTE: Initiating the virtual environment on Ubuntu 14.04 like this currently gives the following error:
Error: Command '['/home/eddie/Slask/tmp/venv/bin/python3', '-Im', 'ensurepip', '--upgrade', '--default-pip']' returned non-zero exit status 1
To get around this, use the
virtualenv
command instead.~/djangogirls$ sudo apt-get install python-virtualenv
~/djangogirls$ virtualenv --python=python3.4
-
Activate the virtualenv (also copied from the djangogirls tutorial - change
djangogirls
toseoulmate_web
)The command above will create a directory called
smvenv
(or whatever name you chose) that contains our virtual environment (basically a bunch of directory and files).Start your virtual environment by running:
C:\Users\Name\seoulmate_web> smvenv\Scripts\activate
Start your virtual environment by running:
~/seoulmate_web$ source smvenv/bin/activate
Remember to replace
smvenv
with your chosenvirtualenv
name!NOTE: sometimes
source
might not be available. In those cases try doing this instead:~/djangogirls$ . smvenv/bin/activate
You will know that you have
virtualenv
started when you see that the prompt in your console looks like:(smvenv) C:\Users\Name\seoulmate_web>
or:
(smvenv) ~/seoulmate_web$
Notice the prefix
(smvenv)
appears!When working within a virtual environment,
python
will automatically refer to the correct version so you can usepython
instead ofpython3
.OK, we have all important dependencies in place. We can finally install Django!
-
Run
pip install -r requirements.txt
to install the pip dependencies -
Run
python manage.py makemigrations
and thenpython manage.py migrate
-
Run
python manage.py runserver
-
Success! (hopefully)
- If you see anything wrong here, please make an issue or a pull request!