sakhoury / oran-o2ims

O-RAN O2IMS

This project is an implementation of the O-RAN O2 IMS API on top of OpenShift and ACM.

Note that at this point this is just experimental and at its very beginnings, so don't try to use it for anything close to a production environment.

Note: this README is only for development purposes.

Quick Start

Build binary

make binary

Run

Metadata server

The metadata server returns information about the supported versions of the API. It doesn't require any backend, only the O-Cloud identifier. You can start it with a command like this:

$ ./oran-o2ims start metadata-server \
--log-level=debug \
--log-file=stdout \
--api-listener-address=localhost:8000 \
--metrics-listener-address="127.0.0.1:8008" \
--cloud-id=123

You can send requests with commands like these:

$ curl -s http://localhost:8000/o2ims-infrastructureInventory/api_versions | jq

$ curl -s http://localhost:8000/o2ims-infrastructureInventory/v1 | jq

Inside VS Code use the Run and Debug option with the start metadata-server configuration.

Deployment manager server

The deployment manager server needs to connect to the non-kubernetes API of the ACM global hub. If you are already connected to an OpenShift cluster that has that global hub installed and configured you can obtain the required URL and token like this:

$ export BACKEND_URL=$(
  oc get route -n multicluster-global-hub multicluster-global-hub-manager -o json |
  jq -r '"https://" + .spec.host'
)
$ export BACKEND_TOKEN=$(
  oc create token -n multicluster-global-hub multicluster-global-hub-manager --duration=24h
)

Start the deployment manager server with a command like this:

$ ./oran-o2ims start deployment-manager-server \
--log-level=debug \
--log-file=stdout \
--api-listener-address=localhost:8001 \
--metrics-listener-address="127.0.0.1:8008" \
--cloud-id=123 \
--backend-url="${BACKEND_URL}" \
--backend-token="${BACKEND_TOKEN}"

Note that by default all the servers listen on localhost:8000, so there will be conflicts if you try to run multiple servers in the same machine. The --api-listener-address and --metrics-listener-address options are used to select a port number that isn't in use.

The cloud-id is any string that you want to use as identifier of the O-Cloud instance.

For more information about other command line flags use the --help command:

$ ./oran-o2ims start deployment-manager-server --help

You can send requests with commands like this:

$ curl -s http://localhost:8001/o2ims-infrastructureInventory/v1/deploymentManagers | jq

Inside VS Code use the Run and Debug option with the start deployment-manager-server configuration.

Resource server

The resource server exposes endpoints for retrieving resource types, resource pools and resources objects. The server relies on the Search Query API of ACM hub. Follow the these instructions to enable and configure the search API access.

The required URL and token can be obtained as follows:

$ export BACKEND_URL=$(
  oc get route -n open-cluster-management search-api -o json |
  jq -r '"https://" + .spec.host'
)
$ export BACKEND_TOKEN=$(
  oc create token -n openshift-oauth-apiserver oauth-apiserver-sa --duration=24h
)

Start the resource server with a command like this:

$ ./oran-o2ims start resource-server \
--log-level=debug \
--log-file=stdout \
--api-listener-address=localhost:8002 \
--metrics-listener-address="127.0.0.1:8008" \
--cloud-id=123 \
--backend-url="${BACKEND_URL}" \
--backend-token="${BACKEND_TOKEN}"

Notes:

• --backend-token-file="${BACKEND_TOKEN_FILE}" can also be used instead of --backend-token.
• see more details regarding api-listener-address and cloud-id in the previous section.

For more information about other command line flags use the --help command:

$ ./oran-o2ims start resource-server --help

Run and Debug

Inside VS Code use the Run and Debug option with the start resource-server configuration.

Requests Examples

GET Resource Type List

To get a list of resource types:

$ curl -s http://localhost:8002/o2ims-infrastructureInventory/v1/resourceTypes | jq

GET Resource Pool List

To get a list of resource pools:

$ curl -s http://localhost:8002/o2ims-infrastructureInventory/v1/resourcePools | jq

GET Resource List

To get a list of resources in a resource pool:

$ curl -s http://localhost:8002/o2ims-infrastructureInventory/v1/resourcePools/{resourcePoolId}
/resources | jq

Infrastructure Inventory Subscription Server (Resource Server)

The infrastructure inventory subscription server exposes endpoints for creating, retrieving and deleting resource subscriptions.

Notes:

• No URL or token are required
• A connection to an ACM hub cluster is required

Start the infrastructure inventory subscription server with a command like this:

$ ./oran-o2ims start infrastructure-inventory-subscription-server \
--log-level=debug \
--log-file=stdout \
--log-field="server=resource-subscriptions" \
--api-listener-address=localhost:8004 \
--metrics-listener-address=localhost:8008 \
--cloud-id=123

For more information about other command line flags use the --help command:

$ ./oran-o2ims start infrastructure-inventory-subscription-server --help

Run and Debug

Inside VS Code use the Run and Debug option with the start infrastructure-inventory-subscription-server configuration.

Request Examples

GET Infrastructure Inventory Subscription List

To get a list of resource subscriptions:

$ curl -s http://localhost:8004/o2ims-infrastructureInventory/v1/subscriptions | jq

GET Infrastructure Inventory Subscription Information

To get all the information about an existing resource subscription:

$ curl -s http://localhost:8004/o2ims-infrastructureInventory/v1/subscriptions/<subscription_uuid> | jq

POST a new Infrastructure Inventory Subscription Information

To add a new resource subscription:

$ curl -s -X POST \
--header "Content-Type: application/json" \
-d @infra-sub.json http://127.0.0.1:8004/o2ims-infrastructureInventory/v1/subscriptions | jq

Where the content of infra-sub.json is as follows:

{
  "consumerSubscriptionId": "69253c4b-8398-4602-855d-783865f5f25c",
  "filter": "(eq,extensions/country,US);",
  "callback": "https://128.224.115.15:1081/smo/v1/o2ims_inventory_observer"
}

DELETE an Infrastructure Inventory Subscription

To delete an existing resource subscription:

$ curl -s -X DELETE \
http://localhost:8000/o2ims-infrastructureInventory/v1/subscriptions/<subscription_uuid> | jq

Alarm server

The alarm server exposes endpoints for retrieving alarms (AlarmEventRecord objects). The server relies on the Alertmanager API from Observability operator. Follow the these instructions to enable and configure Observability.

The required URL and token can be obtained as follows:

$ export BACKEND_URL=$(
  oc get route -n open-cluster-management-observability alertmanager -o json |
  jq -r '"https://" + .spec.host'
)
$ export BACKEND_TOKEN=$(
  oc create token -n openshift-oauth-apiserver oauth-apiserver-sa --duration=24h
)
$ export RESOURCE_SERVER_URL=http://localhost:8002/o2ims-infrastructureInventory/v1/

Start the resource server with a command like this:

$ ./oran-o2ims start alarm-server \
--log-level=debug \
--log-file=stdout \
--api-listener-address=localhost:8003 \
--metrics-listener-address="127.0.0.1:8008" \
--cloud-id=123 \
--backend-url="${BACKEND_URL}" \
--backend-token="${BACKEND_TOKEN}" \
--resource-server-url="${RESOURCE_SERVER_URL}"

Notes:

• See more details regarding api-listener-address and cloud-id in the previous section.
• The alarm server requires the resource-server-url, which is needed for fetching information about resources that are associated with retrieved alarms.

For more information about other command line flags use the --help command:

$ ./oran-o2ims start alarm-server --help

Run and Debug

Inside VS Code use the Run and Debug option with the start alarm-server configuration.

Requests Examples

GET Alarm List

To get a list of alarms:

$ curl -s http://localhost:8003/o2ims-infrastructureMonitoring/v1/alarms | jq

GET an Alarm

To get a list of resource pools:

$ curl -s http://localhost:8003/o2ims-infrastructureMonitoring/v1/alarms/{alarmEventRecordId} | jq

GET Alarm Probable Causes

To get a list of alarm probable causes:

$ curl -s http://localhost:8003/o2ims-infrastructureMonitoring/v1/alarmProbableCauses | jq

Notes:

• This API is not defined by O2ims Interface Specification.
• The server supports the alarmProbableCauses endpoint for exposing a custom list of probable causes.
• The list is available in data folder. Can be customized and maintained as required.

Alarm Subscription server

To use the configmap to persist the subscriptions, the namespace "orantest" should be created at hub cluster for now.

Start the alarm subscription server with a command like this:

$./oran-o2ims start alarm-subscription-server \
--log-file="servers.log" \
--log-level="debug" \
--log-field="server=alarm-subscription" \
--log-field="pid=%p" \
--api-listener-address="127.0.0.1:8006" \
--metrics-listener-address="127.0.0.1:8008" \
--cloud-id="123" 

Note that by default all the servers listen on localhost:8000, so there will be conflicts if you try to run multiple servers in the same machine. The --api-listener-address and --metrics-listener-address options are used to select a port number that isn't in use.

The cloud-id is any string that you want to use as identifier of the O-Cloud instance.

For more information about other command line flags use the --help command:

$ ./oran-o2ims start alarm-subscription-server --help

You can send requests with commands like this:

$ curl -s http://localhost:8001/o2ims-infrastructureMonitoring/v1/alarmSubscriptions | jq

Above example will get a list of existing alarm subscriptions

Inside VS Code use the Run and Debug option with the start alarm-subscription-server configuration.