- Local HTTP/HTTPS/SOCKS server
- Surge-like configuration format
- GeoIP rule support
- Supports Vmess, Shadowsocks, Snell and SOCKS5 protocol
- Supports Netfilter TCP redirecting
- Comprehensive HTTP API
Clash Requires Go >= 1.13. You can build it from source:
$ go get -u -v github.com/whojave/clash
Pre-built binaries are available here: release
Check Clash version with:
$ clash -v
Unfortunately, there is no native and elegant way to implement daemons on Golang.
So we can use third-party daemon tools like PM2, Supervisor or the like.
In the case of pm2, we can start the daemon this way:
$ pm2 start clash
If you have Docker installed, you can run clash directly using docker-compose
.
The default configuration directory is $HOME/.config/clash
.
The name of the configuration file is config.yaml
.
If you want to use another directory, use -d
to control the configuration directory.
For example, you can use the current directory as the configuration directory:
$ clash -d .
This is an example configuration file
# port of HTTP
port: 7890
# port of SOCKS5
socks-port: 7891
# redir port for Linux and macOS
# redir-port: 7892
allow-lan: false
# Only applicable when setting allow-lan to true
# "*": bind all IP addresses
# 192.168.122.11: bind a single IPv4 address
# "[aaaa::a8aa:ff:fe09:57d8]": bind a single IPv6 address
# bind-address: "*"
# Rule / Global/ Direct (default is Rule)
mode: Rule
# set log level to stdout (default is info)
# info / warning / error / debug / silent
log-level: info
# RESTful API for clash
external-controller: 127.0.0.1:9090
# you can put the static web resource (such as clash-dashboard) to a directory, and clash would serve in `${API}/ui`
# input is a relative path to the configuration directory or an absolute path
# external-ui: folder
# Secret for RESTful API (Optional)
# secret: ""
# experimental feature
experimental:
ignore-resolve-fail: true # ignore dns resolve fail, default value is true
# authentication of local SOCKS5/HTTP(S) server
# authentication:
# - "user1:pass1"
# - "user2:pass2"
# # experimental hosts, support wildcard (e.g. *.clash.dev Even *.foo.*.example.com)
# # static domain has a higher priority than wildcard domain (foo.example.com > *.example.com)
# hosts:
# '*.clash.dev': 127.0.0.1
# 'alpha.clash.dev': '::1'
# dns:
# enable: true # set true to enable dns (default is false)
# ipv6: false # default is false
# listen: 0.0.0.0:53
# enhanced-mode: redir-host # or fake-ip
# # fake-ip-range: 198.18.0.1/16 # if you don't know what it is, don't change it
# nameserver:
# - 114.114.114.114
# - tls://dns.rubyfish.cn:853 # dns over tls
# - https://1.1.1.1/dns-query # dns over https
# fallback: # concurrent request with nameserver, fallback used when GEOIP country isn't CN
# - tcp://1.1.1.1
# fallback-filter:
# geoip: true # default
# ipcidr: # ips in these subnets will be considered polluted
# - 240.0.0.0/4
Proxy:
# shadowsocks
# The supported ciphers(encrypt methods):
# aes-128-gcm aes-192-gcm aes-256-gcm
# aes-128-cfb aes-192-cfb aes-256-cfb
# aes-128-ctr aes-192-ctr aes-256-ctr
# rc4-md5 chacha20 chacha20-ietf xchacha20
# chacha20-ietf-poly1305 xchacha20-ietf-poly1305
- name: "ss1"
type: ss
server: server
port: 443
cipher: chacha20-ietf-poly1305
password: "password"
# udp: true
# old obfs configuration format remove after prerelease
- name: "ss2"
type: ss
server: server
port: 443
cipher: chacha20-ietf-poly1305
password: "password"
plugin: obfs
plugin-opts:
mode: tls # or http
# host: bing.com
- name: "ss3"
type: ss
server: server
port: 443
cipher: chacha20-ietf-poly1305
password: "password"
plugin: v2ray-plugin
plugin-opts:
mode: websocket # no QUIC now
# tls: true # wss
# skip-cert-verify: true
# host: bing.com
# path: "/"
# mux: true
# headers:
# custom: value
# vmess
# cipher support auto/aes-128-gcm/chacha20-poly1305/none
- name: "vmess"
type: vmess
server: server
port: 443
uuid: uuid
alterId: 32
cipher: auto
# udp: true
# tls: true
# skip-cert-verify: true
# network: ws
# ws-path: /path
# ws-headers:
# Host: v2ray.com
# socks5
- name: "socks"
type: socks5
server: server
port: 443
# username: username
# password: password
# tls: true
# skip-cert-verify: true
# udp: true
# http
- name: "http"
type: http
server: server
port: 443
# username: username
# password: password
# tls: true # https
# skip-cert-verify: true
# snell
- name: "snell"
type: snell
server: server
port: 44046
psk: yourpsk
# obfs-opts:
# mode: http # or tls
# host: bing.com
Proxy Group:
# url-test select which proxy will be used by benchmarking speed to a URL.
- name: "auto"
type: url-test
proxies:
- ss1
- ss2
- vmess1
url: 'http://www.gstatic.com/generate_204'
interval: 300
# fallback select an available policy by priority. The availability is tested by accessing an URL, just like an auto url-test group.
- name: "fallback-auto"
type: fallback
proxies:
- ss1
- ss2
- vmess1
url: 'http://www.gstatic.com/generate_204'
interval: 300
# load-balance: The request of the same eTLD will be dial on the same proxy.
- name: "load-balance"
type: load-balance
proxies:
- ss1
- ss2
- vmess1
url: 'http://www.gstatic.com/generate_204'
interval: 300
# select is used for selecting proxy or proxy group
# you can use RESTful API to switch proxy, is recommended for use in GUI.
- name: Proxy
type: select
proxies:
- ss1
- ss2
- vmess1
- auto
Rule:
- DOMAIN-SUFFIX,google.com,auto
- DOMAIN-KEYWORD,google,auto
- DOMAIN,google.com,auto
- DOMAIN-SUFFIX,ad.com,REJECT
# rename SOURCE-IP-CIDR and would remove after prerelease
- SRC-IP-CIDR,192.168.1.201/32,DIRECT
# optional param "no-resolve" for IP rules (GEOIP IP-CIDR)
- IP-CIDR,127.0.0.0/8,DIRECT
- GEOIP,CN,DIRECT
- DST-PORT,80,DIRECT
- SRC-PORT,7777,DIRECT
# FINAL would remove after prerelease
# you also can use `FINAL,Proxy` or `FINAL,,Proxy` now
- MATCH,auto
- Complementing the necessary rule operators
- Redir proxy
- UDP support
- Connection manager