ryanmiao / netmap Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/netmap
Automatically exported from code.google.com/p/netmap
Netmap - a framework for fast packet I/O VALE - a Virtual Local Ethernet using the netmap API ======================================================================== NETMAP is a framework for very fast packet I/O from userspace. VALE is an equally fast in-kernel software switch using the netmap API. Both are implemented as a single kernel module for FreeBSD and Linux, and can deal with line rate on real or emulated 10 Gbit ports. See details at http://info.iet.unipi.it/~luigi/netmap/ In this directory you can find source code (BSD-Copyright) for FreeBSD and Linux. Note that recent FreeBSD distributions already include both NETMAP and VALE. For more details please look at the manpage (netmap.4) and netmap home page above. What is this good for --------------------- Netmap is mostly useful for userspace applications that must deal with raw packets: traffic generators, sinks, monitors, loggers, software switches and routers, generic middleboxes, interconnection of virtual machines. In this distribution you will find some example userspace code to build a generator, a sink, and a simple bridge. The kernel module implements a learning ethernet bridge. We also include patches for some applications (noticeably libpcap) so you can run any libpcap client on top of netmap hopefully at a higher speed. Netmap alone DOES NOT accelerate your TCP. For that you need to implement your own tcp/ip stack probably using some of the techniques indicated below to reduce the processing costs. Architecture ------------ netmap uses a number of techniques to establish a fast and efficient path between applications and the network. In order of importance: 1. I/O batching 2. efficient device drivers 3. pre-allocated tx/rx buffers 4. memory mapped buffers Despite the name, memory mapping is NOT the key feature for netmap's speed; systems that do not apply all these techniques do not achieve the same speed _and_ efficiency. Netmap clients use a select()-able file descriptor to synchronize with the network card/software switch, and exchange multiple packets per system call through device-independent memory mapped buffers and descriptors. Device drivers are completely in the kernel, and the system does not rely on IOMMU or other special mechanisms. Installation instructions ------------------------- A kernel module (netmap.ko or netmap_lin.ko) implements the core NETMAP routines and the VALE switch. Netmap-aware device drivers are needed to use netmap on ethernet ports. To date, we have support for Intel ixgbe (10G), e1000/e1000e/igb (1G), Realtek 8169 (1G) and Nvidia (1G). If you do not have a supported device, you can still try out netmap (with reduced performance) because the main kernel module emulates the netmap API on top of standard device drivers. FreeBSD instructions: --------------------- Since recent FreeBSD distributions already include netmap, you only need build the new kernel or modules as below: + add 'device netmap' to your kernel config file and rebuild a kernel. This will include the netmap module and netmap support in the device drivers. Alternatively, you can build standalone modules (netmap, ixgbe, em, lem, re, igb) + sample applications are in the examples/ directory in this archive, or in src/tools/tools/netmap/ in FreeBSD distributions Linux instructions: ------------------- On Linux, netmap is an out-of-tree module, so you need to compile it from these sources. The Makefile in the LINUX/ directory will also let you patch device driver sources and build some netmap-enabled device drivers. + make sure you have kernel sources matching your installed kernel (headers only suffice, if you want NETMAP/VALE but no drivers) + build kernel modules and sample applications: If kernel sources are in /foo//linux-A.B.C/ , then you should do cd netmap/LINUX # build kernel modules make NODRIVERS=1 KSRC=/foo/linux-A.B.C/ # only netmap make KSRC=/a/b/c/linux-A.B.C/ # netmap+device drivers # build sample applications make KSRC=/a/b/c/linux-A.B.C/ apps # builds sample applications You can omit KSRC if your kernel sources are in a standard place. + if you use distribution packages, source may not contain headers (e.g., on debian systems). Use make SRC=/a/b/c/linux-sources-A.B/ KSRC=/a/b/c/linux-headers-A.B/ Applications ------------ The directory examples/ contains some programs that use the netmap API pkt-gen.c a packet generator/receiver working at line rate at 10Gbit/s vale-cfg.c utility to configure ports of a VALE switch bridge.c a utility that bridges two interfaces or one interface with the host stack For libpcap and other applications look at the extra/ directory. Testing ------- pkt-gen is a generic test program which can act as a sender or receiver. It has a large number of options, but the simplest form is: pkt-gen -i ix0 -f rx # receive and print stats pkt-gen -i ix0 -f tx -l 60 # send a stream of 60-byte packets (replace ix0 with the name of the interface or VALE port). This should be able to work at line rate (up to 14.88 Mpps on 10 Gbit/interfaces, even higher on VALE) but note the following OPERATING SPEED --------------- Netmap is able to send packets at very high rates, and for simple packet transmission and reception, speed generally not limited by the CPU but by other factors (link speed, bus or NIC hw limitations). For a physical link, the maximum numer of packets per second can be computed with the formula: pps = line_rate / (672 + 8 * pkt_size) where "line_rate" is the nominal link rate (e.g 10 Gbit/s) and pkt_size is the actual packet size including MAC headers and CRC. The following table summarizes some results LINE RATE pkt_size \ 100M 1G 10G 40G 64 .1488 1.488 14.88 59.52 128 .0589 0.589 5.89 23.58 256 .0367 0.367 3.67 14.70 512 .0209 0.209 2.09 8.38 1024 .0113 0.113 1.13 4.51 1518 .0078 0.078 0.78 3.12 On VALE ports, there is no physical link and the throughput is limited by CPU or memory depending on the packet size. COMMON PROBLEMS --------------- Before reporting slow send or receive speed on a physical interface, check ALL of the following: CANNOT SET THE DEVICE IN NETMAP MODE: + make sure that the netmap module and drivers are correctly loaded and can allocate all the memory they need (check into /var/log/messages or equivalent) + check permissions on /dev/netmap + make sure the interface is up before invoking pkt-gen SENDER DOES NOT TRANSMIT + some switches/interfaces take a long time to (re)negotiate the link after starting pkt-gen; in case, use the -w N option to increase the initial delay to N seconds; This may cause inability to transmit, or lost packets for the first few seconds of transmission RECEIVER DOES NOT RECEIVE + make sure traffic uses a broadcast MAC addresses, or the UNICAST address of the receiving interface, or the receiving interface is in promiscuous mode (this must be done with ifconfig; pkt-gen does not change the operating mode) LOWER SPEED THAN LINE RATE + check that your CPUs are running at the maximum clock rate and are not throttled down by the governor/powerd. + make sure that the sender/receiver interfaces and switch have flow control (FC) disabled (either via sysctl or ethtool). If FC is enabled and the receiving end is unable to cope with the traffic, the driver will try to slow down transmission, sometimes to very low rates. + a lot of hardware is not able to sustain line rate. For instance, ixgbe has problems with receiving frames that are not multiple of 64 bytes (with/without CRC depending on the driver); also on transmissions, ixgbe tops at about 12.5 Mpps unless the driver prefetches tx descriptors. igb does line rate in all configurations. e1000/e1000e vary between 1.15 and 1.32 Mpps. re/r8169 is extremely slow in sending (max 4-500 Kpps) Credits ------- NETMAP and VALE are projects of the Universita` di Pisa, partially supported by various entities including: Intel Research Berkeley, EU FP7 projects CHANGE and OPENLAB, Netapp/Silicon Valley Community Foundation, ICSI Author: Luigi Rizzo Contributors: Giuseppe Lettieri Michio Honda Marta Carbone Gaetano Catalli Matteo Landi Vincenzo Maffione References ---------- There are a few academic papers describing netmap, VALE and applications. You can find the papers at http://info.iet.unipi.it/~luigi/research.html + Luigi Rizzo, netmap: a novel framework for fast packet I/O, Usenix ATC'12, Boston, June 2012 + Luigi Rizzo, Revisiting network I/O APIs: the netmap framework, Communications of the ACM 55 (3), 45-51, March 2012 + Luigi Rizzo, Marta Carbone, Gaetano Catalli, Transparent acceleration of software packet forwarding using netmap, IEEE Infocom 2012, Orlando, March 2012 + Luigi Rizzo, Giuseppe Lettieri, VALE: a switched ethernet for virtual machines, ACM Conext 2012, Nice, Dec. 2012 + Luigi Rizzo, Giuseppe Lettieri, Vincenzo Maffione, Speeding up packet I/O in virtual machines, IEEE/ACM ANCS 2013, San Jose, Oct. 2013
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.