rpatel3001 / docker-dumpvdl2

Docker container to run dumpvdl2

Docker dumpvdl2

Docker container for running dumpvdl2 and forwarding the received JSON messages to another system or docker container. Best used alongside ACARS Hub.

Builds and runs on amd64, arm64, arm/v7.

Note for Users running 32-bit Debian Buster-based OSes on ARM

Please see: Buster-Docker-Fixes!

Required hardware

A computer host on a suitable architecture and one USB RTL-SDR dongle connected to an antenna.

Deprecation Notice

SERIAL has been deprecated in favor of SOAPYSDR. Please update your configuration accordingly. If SERIAL is set the driver will be set to rtlsdr and the serial number will be set to the value of SERIAL.

Up and running

version: "2.0"

services:
  dumpvdl2:
    image: ghcr.io/sdr-enthusiasts/docker-dumpvdl2:latest
    tty: true
    container_name: dumpvdl2
    restart: always
    devices:
      - /dev/bus/usb:/dev/bus/usb
    ports:
    environment:
      - TZ="America/Denver"
      - SOAPYSDR=driver=rtlsdr,serial=13305
      - FEED_ID=VDLM
      - FREQUENCIES=136725000;136975000;136875000
      - ZMQ_MODE=server
      - ZMQ_ENDPOINT=tcp://0.0.0.0:45555
    tmpfs:
      - /run:exec,size=64M
      - /var/log

Configuration options

Variable	Description	Required	Default
TZ	Your timezone	No	UTC
SOAPYSDR	The SoapySDR device string that identifies your dongle. See below for supported soapy sdr types.	No	Blank
FEED_ID	Used by the decoder to insert a unique ID in to the output message	Yes	Blank
FREQUENCIES	Semicolon-separated list of frequencies for the decoder to listen to. All frequencies should either be in Hz, or in MHz with exactly 3 digits after the decimal point.	Yes	Blank
PPM	Parts per million correction of the decoder	No	0
GAIN	The gain applied to the RTL-SDR dongle.	No	40
OVERSAMPLE	Overrides the default oversampling rate used by dumpvdl2.	No	Blank
VDLM_FILTER_ENABLE	Filter out non-informational messages. Turning this off (set to a blank value) will cause increased message rate but the messages will be of little value. Will cause extra SD card read/writes.	No	TRUE
VDLM_FILTER	Specify the dumpvdl2 filter string. Used it VDLM_FILTER_ENABLE is true.	No	all,-avlc_s,-acars_nodata,-x25_control,-idrp_keepalive,-esis
QUIET_LOGS	Mute log output to the bare minimum. Set to false to disable.	No	TRUE
ZMQ_MODE	Output to zmq publisher socket. This sets the mode to client or server.	No
ZMQ_ENDPOINT	Output to zmq publisher socket. This sets the endpoint. Syntax is tcp://address:port	No
STATSD_SERVER	Output to a statsd instance.	No	unset

SoapySDR device string

The SoapySDR device string is used to identify your RTL-SDR dongle. The default value is driver=rtlsdr which is suitable for most users. If you are using a different SDR, you will need to provide the correct device string. For example, if you are using an Airspy Mini, you would set SOAPYSDR=driver=airspy. Pass any additional options for the SDR in via this option as well.

Supported Soapy Drivers:

• rtlsdr
• rtltcp
• airspy
• sdrplay