AIM:
To implement Encoder 8 To 3 in Dataflow Modelling using verilog and validating their functionality using their functional tables
SOFTWARE REQUIRED: Quartus prime
THEORY
Encoder 8 To 3
The 8 to 3 line Encoder is also known as Octal to Binary Encoder. In 8 to 3 line encoder, there is a total of eight inputs, i.e., D0, D1, D2, D3, D4, D5, D6, and D7 and three outputs, i.e., A0, A1, and A2. In 8-input lines, one input-line is set to true at a time to get the respective binary code in the output side. Below are the block diagram and the truth table of the 8 to 3 line encoder.
Figure 01 Block Diagram of Encoder 8 * 3
Truth Table
The logical expression of the term A0, A1, and A2 are as follows:
A0 = D1 + D3 + D5 + D7
A1 = D2 + D3 + D6 + D7
A2 = D4 + D5 + D6 + D7
Logical circuit of the above expressions is given below:
Figure 02 Encoder 8 * 3
Procedure
1.Type the program in Quartus software.
2.Compile and run the program.
3.Generate the RTL schematic and save the logic diagram.
4.Create nodes for inputs and outputs to generate the timing diagram.
5.For different input combinations generate the timing diagram.
PROGRAM
Developed by: Rohiit.A.S
Register No:212223100047
module encoder(a0,a1,a2,d0,d1,d2,d3,d4,d5,d6,d7);
input d0,d1,d2,d3,d4,d5,d6,d7;
output a0,a1,a2;
assign a0=d1|d3|d5|d7;
assign a1=d2|d3|d6|d7;
assign a2=d4|d5|d6|d7;
endmodule
RTL LOGIC FOR Encoder 8 To 3 in Dataflow Modelling
TIMING DIGRAMS FOR Encoder 8 To 3 in Dataflow Modelling
RESULTS
Thus the Encoder 8 to 3 dataflow circuits are designed and the truth tables is verified using Quartus software.