Coder Social home page Coder Social logo

fscrawler's Introduction

FileSystem Crawler for Elasticsearch

Welcome to the FS Crawler for Elasticsearch

This crawler helps to index documents from your local file system and over SSH. It crawls your file system and index new files, update existing ones and removes old ones.

You need to install a version matching your Elasticsearch version:

Elasticsearch FS Crawler Released Docs
es-2.0 2.0.0 2015-10-30 2.0.0
1.x, 2.x, 5.x 2.1 2016-07-26 2.1
1.x, 2.x, 5.x 2.2 2017-02-03 2.2
1.x, 2.x, 5.x 2.3-SNAPSHOT See below

From FS Crawler 2.1, all elasticsearch versions since 1.0 are supported.

Build Status

Thanks to Travis for the build status: Build Status

Table of content

Installation Guide

Download fscrawler

FS Crawler binary is available on Maven Central. Just download the latest release (or any other specific version you want to try).

The filename ends with .zip.

For example, if you wish to download fscrawler-2.2:

wget https://repo1.maven.org/maven2/fr/pilato/elasticsearch/crawler/fscrawler/2.2/fscrawler-2.2.zip
unzip fscrawler-2.2.zip

The distribution contains:

$ tree
.
├── LICENSE
├── NOTICE
├── README.md
├── bin
│   ├── fscrawler
│   └── fscrawler.bat
└── lib
    ├── ... All needed jars

Note that you can also download a SNAPSHOT version from sonatype without needing to build it by yourself.

Upgrade fscrawler

It can happen that you need to upgrade a mapping before starting fscrawler after a version upgrade. Read carefully the following update instructions.

To update fscrawler, just download the new version, unzip it in another directory and launch it as usual. It will still pick up settings from the configuration directory. Of course, you need to stop first the existing running instances.

Upgrade to 2.2

  • fscrawler comes with new default mappings for files. They have better defaults as they consume less disk space and CPU at index time. You should remove existing files in ~/.fscrawler/_default/_mappings before starting the new version so default mappings will be updated. If you modified manually mapping files, apply the modification you made on sample files.

  • excludes is now set by default for new jobs to ["~*"]. In previous versions, any file or directory containing a ~ was excluded. Which means that if in your jobs, you are defining any exclusion rule, you need to add *~* if you want to get back the exact previous behavior.

  • If you were indexing json or xml documents with the filename_as_id option set, we were previously removing the suffix of the file name, like indexing 1.json was indexed as 1. With this new version, we don't remove anymore the suffix. So the _id for your document will be now 1.json.

User Guide

Getting Started

You need to have at least Java 1.8. and have properly configured JAVA_HOME to point to your Java installation directory. For example on MacOS you can define in your ~/.bash_profile file:

export JAVA_HOME=`/usr/libexec/java_home -v 1.8`

Start FS crawler with:

bin/fscrawler job_name

FS crawler will read a local file (default to ~/.fscrawler/{job_name}/_settings.json). If the file does not exist, FS crawler will propose to create your first job.

$ bin/fscrawler job_name
18:28:58,174 WARN  [f.p.e.c.f.FsCrawler] job [job_name] does not exist
18:28:58,177 INFO  [f.p.e.c.f.FsCrawler] Do you want to create it (Y/N)?
y
18:29:05,711 INFO  [f.p.e.c.f.FsCrawler] Settings have been created in [~/.fscrawler/job_name/_settings.json]. Please review and edit before relaunch

Create a directory named /tmp/es or c:\tmp\es, add some files you want to index in it and start again:

$ bin/fscrawler --config_dir ./test job_name
18:30:34,330 INFO  [f.p.e.c.f.FsCrawlerImpl] Starting FS crawler
18:30:34,332 INFO  [f.p.e.c.f.FsCrawlerImpl] FS crawler started in watch mode. It will run unless you stop it with CTRL+C.
18:30:34,682 INFO  [f.p.e.c.f.FsCrawlerImpl] FS crawler started for [job_name] for [/tmp/es] every [15m]

If you did not create the directory, FS crawler will complain until you fix it:

18:30:34,683 WARN  [f.p.e.c.f.FsCrawlerImpl] Error while indexing content from /tmp/es: /tmp/es doesn't exists.

You can also run FS crawler without arguments. It will give you the list of existing jobs and will allow you to choose one:

$ bin/fscrawler
18:33:00,624 INFO  [f.p.e.c.f.FsCrawler] No job specified. Here is the list of existing jobs:
18:33:00,629 INFO  [f.p.e.c.f.FsCrawler] [1] - job_name
18:33:00,629 INFO  [f.p.e.c.f.FsCrawler] Choose your job [1-1]...
1
18:33:06,151 INFO  [f.p.e.c.f.FsCrawlerImpl] Starting FS crawler

Searching for docs

This is a common use case in elasticsearch, we want to search for something! ;-)

GET docs/doc/_search
{
  "query" : {
    "match" : {
        "_all" : "I am searching for something !"
    }
  }
}

Crawler options

By default, FS crawler will read your file from /tmp/es every 15 minutes. You can change those settings by modifying ~/.fscrawler/{job_name}/_settings.json file where {job_name} is the name of the job you just created.

{
  "name" : "job_name",
  "fs" : {
    "url" : "/path/to/data/dir",
    "update_rate" : "15m"
  }
}

You can change also update_rate to watch more or less frequently for changes.

If you just want FS crawler to run once and exit, run it with --loop option:

$ bin/fscrawler job_name --loop 1
18:47:37,487 INFO  [f.p.e.c.f.FsCrawlerImpl] Starting FS crawler
18:47:37,854 INFO  [f.p.e.c.f.FsCrawlerImpl] FS crawler started for [job_name] for [/tmp/es] every [15m]
...
18:47:37,855 INFO  [f.p.e.c.f.FsCrawlerImpl] FS crawler is stopping after 1 run
18:47:37,959 INFO  [f.p.e.c.f.FsCrawlerImpl] FS crawler [job_name] stopped

If you have already ran FS crawler and want to restart (which means reindex existing documents), use the --restart option:

$ bin/fscrawler job_name --loop 1 --restart

You will find more information about settings in the following sections:

Starting with a REST gateway

FS crawler can be a nice gateway to elasticsearch if you want to upload binary documents and index them into elasticsearch without writing by yourself all the code to extract data and communicate with elasticsearch.

To start FS crawler with the REST service, use the --rest option. A good idea is also to combine it with --loop 0 so you won't index local files but only listen to incoming REST requests:

$ bin/fscrawler job_name --loop 0 --rest
18:55:37,851 INFO  [f.p.e.c.f.FsCrawlerImpl] Starting FS crawler
18:55:39,237 INFO  [f.p.e.c.f.FsCrawlerImpl] FS crawler Rest service started on [http://127.0.0.1:8080/fscrawler]

Check the service is working with:

curl http://127.0.0.1:8080/fscrawler/

It will give you back a JSON document.

The you can start uploading your binary files:

echo "This is my text" > test.txt
curl -F "[email protected]" "http://127.0.0.1:8080/fscrawler/_upload"

It will index the file into elasticsearch and will give you back the elasticsearch URL for the created document, like:

{
  "ok" : true,
  "filename" : "test.txt",
  "url" : "http://127.0.0.1:9200/fscrawler-rest-tests/doc/dd18bf3a8ea2a3e53e2661c7fb53534"
}

You will find more information about REST settings in the following section:

Supported formats

FS crawler supports all formats Tika version 1.14 supports, like:

  • HTML
  • Microsoft Office
  • Open Office
  • PDF
  • Images
  • MP3
  • ...

Administration guide

Once the crawler is running, it will write status information and statistics in:

  • ~/.fscrawler/{job_name}/_settings.json
  • ~/.fscrawler/{job_name}/_status.json

It means that if you stop the job at some point, FS crawler will restart it from where it stops.

FS crawler will also store default mappings and index settings for elasticsearch in ~/.fscrawler/_default/_mappings:

  • 1/doc.json: for elasticsearch 1.x series document mapping
  • 1/folder.json: for elasticsearch 1.x series folder mapping
  • 1/_settings.json: for elasticsearch 1.x series index settings
  • 2/doc.json: for elasticsearch 2.x series document mapping
  • 2/folder.json: for elasticsearch 2.x series folder mapping
  • 2/_settings.json: for elasticsearch 2.x series index settings
  • 5/doc.json: for elasticsearch 5.x series document mapping
  • 5/folder.json: for elasticsearch 5.x series folder mapping
  • 5/_settings.json: for elasticsearch 5.x series index settings

Read Mapping for more information.

CLI options

  • --help displays help

  • --silent runs in silent mode. No output is generated.

  • --debug runs in debug mode.

  • --trace runs in trace mode (more verbose than debug).

  • --config_dir defines directory where jobs are stored instead of default ~/.fscrawler.

  • --username defines the username to use when using an secured version of elasticsearch cluster. Read Using Credentials. (From 2.2)

  • --upgrade_mapping tries to upgrade existing mappings for documents and folders. Read Upgrading an existing mapping. (From 2.2)

  • --loop x defines the number of runs we want before exiting (From 2.2):

    • X where X is a negative value means infinite, like -1 (default)
    • 0 means that we don't run any crawling job (useful when used with rest).
    • X where X is a positive value is the number of runs before it stops.

If you want to scan your hard drive only once, run with --loop 1.

  • --restart restart a job from scratch (From 2.2). See below.
  • --rest starts the REST service (From 2.2):

If you want to run the REST Service without scanning your hard drive, launch with:

bin/fscrawler --rest --loop 0

You can tell FS crawler that it must restart from the beginning by using --restart option:

bin/fscrawler job_name --restart

In that case, the {job_name}/_status.json file will be removed.

JVM Settings

If you want to provide JVM settings, like defining memory allocated to FS Crawler, you can define a system property named FS_JAVA_OPTS:

FS_JAVA_OPTS="-Xmx521m -Xms521m" bin/fscrawler

Job file specification

The job file must comply to the following json specifications:

{
  "name" : "job_name",
  "fs" : {
    "url" : "/path/to/data/dir",
    "update_rate" : "15m",
    "includes": [
      "*.*"
    ],
    "excludes": [
      "*.json"
    ],
    "json_support" : false,
    "xml_support" : false,
    "ignore_folders" : false,
    "attributes_support" : false,
    "raw_metadata" : false,
    "filename_as_id" : false,
    "add_filesize" : true,
    "remove_deleted" : true,
    "store_source" : false,
    "lang_detect" : false,
    "continue_on_error" : false,
    "indexed_chars" : "10000"
  },
  "server" : {
    "hostname" : null,
    "port" : 22,
    "username" : null,
    "password" : null,
    "protocol" : "local",
    "pem_path" : null
  },
  "elasticsearch" : {
    "nodes" : [ {
      "host" : "127.0.0.1",
      "port" : 9200,
      "scheme" : "HTTP"
    } ],
    "index" : "docs",
    "type" : "doc",
    "bulk_size" : 100,
    "flush_interval" : "5s",
    "username" : "username",
    "password" : "password",
    "pipeline" : "pipeline-id-if-any"
  },
  "rest" : {
    "enabled" : false,
    "scheme" : "HTTP",
    "host" : "127.0.0.1",
    "port" : 8080,
    "port" : "fscrawler"
  }
}

Here is a list of existing top level settings:

Name Documentation
name the job name (mandatory field)
fs Local FS settings
elasticsearch Elasticsearch settings
server SSH settings
rest REST settings

The most simple crawler

You can define the most simple crawler job by writing a ~/.fscrawler/test/_settings.json file as follow:

{
  "name" : "test"
}

This will scan every 15 minutes all documents available in /tmp/es dir and will index them into test index with doc type. It will connect to an elasticsearch cluster running on 127.0.0.1, port 9200.

Note: name is a mandatory field.

Local FS settings

Here is a list of Local FS settings (under fs. prefix)`:

Name Default value Documentation
fs.url "/tmp/es" Root directory
fs.update_rate "15m" Update Rate
fs.includes null Includes and Excludes
fs.excludes ["~*"] Includes and Excludes
fs.json_support false Indexing JSon docs
fs.xml_support false Indexing XML docs (from 2.2)
fs.add_as_inner_object false Add as Inner Object
fs.ignore_folders false Ignore folders (from 2.2)
fs.attributes_support false Adding file attributes
fs.raw_metadata true Disabling raw metadata
fs.filename_as_id false Using Filename as _id
fs.add_filesize true Disabling file size field
fs.remove_deleted true Ignore deleted files
fs.store_source false Storing binary source document
fs.index_content true Ignore content
fs.lang_detect false Language detection (from 2.2)
fs.continue_on_error false Continue on File Permission Error (from 2.3)
fs.indexed_chars 100000.0 Extracted characters
fs.checksum null File signature

Root directory

Define fs.url property in your ~/.fscrawler/test/_settings.json file:

{
  "name" : "test",
  "fs" : {
    "url" : "/path/to/data/dir"
  }
}

For Windows users, use a form like c:/tmp or c:\\tmp.

Update rate

By default, update_rate is set to 15m. You can modify this value using any compatible time unit.

For example, here is a 15 minutes update rate:

{
  "name": "test",
  "fs": {
    "update_rate": "15m"
  }
}

Or a 3 hours update rate:

{
  "name": "test",
  "fs": {
    "update_rate": "3h"
  }
}

update_rate is the pause duration between the last time we read the file system and another run. Which means that if you set it to 15m, the next scan will happen on 15 minutes after the end of the current scan, whatever its duration.

Includes and excludes

Let's say you want to index only docs like *.doc and *.pdf but resume*. So resume_david.pdf won't be indexed.

Define fs.includes and fs.excludes properties in your ~/.fscrawler/test/_settings.json file:

{
  "name" : "test",
  "fs": {
    "includes": [
      "*.doc",
      "*.pdf"
    ],
    "excludes": [
      "resume*"
    ]
  }
}

It also applies to directory names. So if you want to ignore .ignore dir, just add .ignore as an excluded name. Note that includes does not apply to directory names but only to filenames.

By default, FS crawler will exclude files starting with ~.

Indexing JSon docs

If you want to index JSon files directly without parsing with Tika, you can set json_support to true. JSon contents will be stored directly under _source. If you need to keep JSon documents synchronized to the index, set option Add as Inner Object which stores additional metadata and the JSon contents under field object.

{
  "name" : "test",
  "fs" : {
    "json_support" : true
  }
}

Of course, if you did not define a mapping before launching the crawler, Elasticsearch will auto guess the mapping.

Indexing XML docs

If you want to index XML files and convert them to JSON, you can set xml_support to true. The content of XML files will be added directly under _source. If you need to keep XML documents synchronized to the index, set option Add as Inner Object which stores additional metadata and the XML contents under field object.

{
  "name" : "test",
  "fs" : {
    "xml_support" : true
  }
}

Of course, if you did not define a mapping before launching the crawler, Elasticsearch will auto guess the mapping.

Add as Inner Object

The default settings store the contents of json and xml documents directly onto the _source element of elasticsearch documents. Thereby, there is no metadata about file and path settings, which are necessary to determine if a document is deleted or updated. New files will however be added to the index, (determined by the file timestamp).

If you need to keep json or xml documents synchronized to elasticsearch, you should set this option.

{
  "name" : "test",
  "fs" : {
    "add_as_inner_object" : true
  }
}

Ignore folders

By default FS Crawler will index folder names in the index using a specific folder type. If you don't want to index those folders, you can set ignore_folders to true.

Note that in that case, FS Crawler won't be able to detect removed folders so any document has been indexed in elasticsearch, it won't be removed when you remove or move the folder.

{
  "name" : "test",
  "fs" : {
    "ignore_folders" : true
  }
}
Dealing with multiple types and multiple dirs

If you have more than one type, create as many crawlers as types:

~/.fscrawler/test_type1/_settings.json:

{
  "name": "test_type1",
  "fs": {
	"url": "/tmp/type1",
	"json_support" : true
  },
  "elasticsearch": {
    "index": "mydocs",
    "type": "type1"
  }
}

~/.fscrawler/test_type2/_settings.json:

{
  "name": "test_type2",
  "fs": {
	"url": "/tmp/type2",
	"json_support" : true
  },
  "elasticsearch": {
    "index": "mydocs",
    "type": "type2"
  }
}

~/.fscrawler/test_type3/_settings.json:

{
  "name": "test_type3",
  "fs": {
	"url": "/tmp/type3",
	"xml_support" : true
  },
  "elasticsearch": {
    "index": "mydocs",
    "type": "type3"
  }
}
Dealing with multiple types within the same dir

You can also index many types from one single dir using two crawlers scanning the same dir and by setting includes parameter:

~/.fscrawler/test_type1.json:

{
  "name": "test_type1",
  "fs": {
	"url": "/tmp",
    "includes": [ "type1*.json" ],
	"json_support" : true
  },
  "elasticsearch": {
    "index": "mydocs",
    "type": "type1"
  }
}

~/.fscrawler/test_type2.json:

{
  "name": "test_type2",
  "fs": {
	"url": "/tmp",
    "includes": [ "type2*.json" ],
	"json_support" : true
  },
  "elasticsearch": {
    "index": "mydocs",
    "type": "type2"
  }
}

~/.fscrawler/test_type3.json:

{
  "name": "test_type3",
  "fs": {
	"url": "/tmp",
    "includes": [ "*.xml" ],
	"xml_support" : true
  },
  "elasticsearch": {
    "index": "mydocs",
    "type": "type3"
  }
}

Using filename as elasticsearch _id

Please note that the document _id is always generated (hash value) from the filename to avoid issues with special characters in filename. You can force to use the _id to be the filename using filename_as_id attribute:

{
  "name" : "test",
  "fs" : {
    "filename_as_id" : true
  }
}

Adding file attributes

If you want to add file attributes such as attributes.owner and attributes.group, you can set attributes_support to true.

{
  "name" : "test",
  "fs" : {
    "attributes_support" : true
  }
}

Disabling raw metadata

By default, FS Crawler will extract all found metadata within meta.raw object. If you want to disable this feature, you can set raw_metadata to false.

{
  "name" : "test",
  "fs" : {
    "raw_metadata" : false
  }
}

Generated raw metadata depends on the file format itself.

For example, a PDF document could generate:

  • "date" : "2016-07-07T08:37:42Z"
  • "pdf:PDFVersion" : "1.5"
  • "xmp:CreatorTool" : "Microsoft Word"
  • "Keywords" : "keyword1, keyword2"
  • "access_permission:modify_annotations" : "true"
  • "access_permission:can_print_degraded" : "true"
  • "subject" : "Test Tika Object"
  • "dc:creator" : "David Pilato"
  • "dcterms:created" : "2016-07-07T08:37:42Z"
  • "Last-Modified" : "2016-07-07T08:37:42Z"
  • "dcterms:modified" : "2016-07-07T08:37:42Z"
  • "dc:format" : "application/pdf; version=1.5"
  • "title" : "Test Tika title"
  • "Last-Save-Date" : "2016-07-07T08:37:42Z"
  • "access_permission:fill_in_form" : "true"
  • "meta:save-date" : "2016-07-07T08:37:42Z"
  • "pdf:encrypted" : "false"
  • "dc:title" : "Test Tika title"
  • "modified" : "2016-07-07T08:37:42Z"
  • "cp:subject" : "Test Tika Object"
  • "Content-Type" : "application/pdf"
  • "X-Parsed-By" : "org.apache.tika.parser.DefaultParser"
  • "creator" : "David Pilato"
  • "meta:author" : "David Pilato"
  • "dc:subject" : "keyword1, keyword2"
  • "meta:creation-date" : "2016-07-07T08:37:42Z"
  • "created" : "Thu Jul 07 10:37:42 CEST 2016"
  • "access_permission:extract_for_accessibility" : "true"
  • "access_permission:assemble_document" : "true"
  • "xmpTPg:NPages" : "2"
  • "Creation-Date" : "2016-07-07T08:37:42Z"
  • "access_permission:extract_content" : "true"
  • "access_permission:can_print" : "true"
  • "meta:keyword" : "keyword1, keyword2"
  • "Author" : "David Pilato"
  • "access_permission:can_modify" : "true"

Where a MP3 file would generate:

  • "xmpDM:genre" : "Vocal"
  • "X-Parsed-By" : "org.apache.tika.parser.DefaultParser"
  • "creator" : "David Pilato"
  • "xmpDM:album" : "FS Crawler"
  • "xmpDM:trackNumber" : "1"
  • "xmpDM:releaseDate" : "2016"
  • "meta:author" : "David Pilato"
  • "xmpDM:artist" : "David Pilato"
  • "dc:creator" : "David Pilato"
  • "xmpDM:audioCompressor" : "MP3"
  • "title" : "Test Tika"
  • "xmpDM:audioChannelType" : "Stereo"
  • "version" : "MPEG 3 Layer III Version 1"
  • "xmpDM:logComment" : "Hello but reverted"
  • "xmpDM:audioSampleRate" : "44100"
  • "channels" : "2"
  • "dc:title" : "Test Tika"
  • "Author" : "David Pilato"
  • "xmpDM:duration" : "1018.775146484375"
  • "Content-Type" : "audio/mpeg"
  • "samplerate" : "44100"

As elasticsearch will by default to automatically guess the type, you could end up having conflicts between metadata raw fields: a field which is first detected as a date but is getting for another document a value like "in the seventies". In such a case, you could imagine forcing the mapping or defining an index mapping template.

Note that dots in metadata names will be replaced by a :. For example PTEX.Fullbanner will be indexed as PTEX:Fullbanner.

Disabling file size field

By default, FS crawler will create a field to store the original file size in octets. You can disable it using `add_filesize' option:

{
  "name" : "test",
  "fs" : {
    "add_filesize" : false
  }
}

Ignore deleted files

If you don't want to remove indexed documents when you remove a file or a directory, you can set remove_deleted to false (default to true):

{
  "name" : "test",
  "fs" : {
    "remove_deleted" : false
  }
}

Ignore content

If you don't want to extract file content but only index filesystem metadata such as filename, date, size and path, you can set index_content to false (default to true):

{
  "name" : "test",
  "fs" : {
    "index_content" : false
  }
}

Continue on Error

By default FS Crawler will immediately stop indexing if he hits a Permission denied exception. If you want to just skip this File and continue with the rest of the directory tree you can set continue_on_error to true (default to false):

{
  "name" : "test",
  "fs" : {
    "continue_on_error" : true
  }
}

Language detection

From FS crawler 2.2, you can ask for language detection using lang_detect option:

{
  "name" : "test",
  "fs" : {
    "lang_detect" : true
  }
}

In that case, a new field named meta.language is added to the generated JSon document.

If you are using elasticsearch 5.0 or superior, you can use this value to send your document to a specific index using a Node Ingest pipeline.

For example, you can define a pipeline named langdetect with:

PUT _ingest/pipeline/langdetect
{
  "description" : "langdetect pipeline",
  "processors" : [
    {
      "set": {
        "field": "_index"
        "value": "myindex-{{meta.language}}"
      }
    }
  ]
}

In FS crawler settings, set both fs.lang_detect and elasticsearch.pipeline options:

{
  "name" : "test",
  "fs" : {
    "lang_detect" : true
  },
  "elasticsearch" : {
    "pipeline" : "langdetect"
  }
}

And then, a document containing french text will be sent to myindex-fr. A document containing english text will be sent to myindex-en.

You can also imagine changing the field name from content to content-fr or content-en. That will help you to define the correct analyzer to use.

Language detection might detect more than one language in a given text but only the most accurate will be set. Which means that if you have a document containing 80% of french and 20% of english, the document will be marked as fr.

Note that language detection is CPU and time consuming.

Storing binary source document (BASE64 encoded)

You can store in elasticsearch itself the binary document using store_source option:

{
  "name" : "test",
  "fs" : {
    "store_source" : true
  }
}

In that case, a new field named attachment is added to the generated JSon document. This field is not indexed. Default mapping for attachment field is:

{
  "doc" : {
    "properties" : {
      "attachment" : {
        "type" : "binary",
        "doc_values" : false
      }
      // ... Other properties here
    }
  }
}

Extracted characters

By default FS crawler will extract only the first 100 000 characters. But, you can set indexed_chars to 5000 in FS crawler settings in order to overwrite this default settings.

{
  "name": "test",
  "fs": {
    "indexed_chars": "5000"
  }
}

This number can be either a fixed size, number of characters that is, or a percent using % sign. The percentage value will be applied to the filesize to determine the number of character the crawler needs to extract.

If you want to index only 80% of filesize, define indexed_chars to "80%". Of course, if you want to index the full document, you can set this property to "100%". Double values are also supported so "0.01%" is also a correct value.

Compressed files: If your file is compressed, you might need to increase indexed_chars to more than "100%". For example, "150%".

If you want to extract the full content, define indexed_chars to "-1".

Note: Tika requires to allocate in memory a data structure to extract text. Setting indexed_chars to a high number will require more memory!

File checksum

If you want FS crawler to generate a checksum for each file, set checksum to the algorithm you wish to use to compute the checksum, such as MD5 or SHA-1.

{
  "name": "test",
  "fs": {
    "checksum": "MD5"
  }
}

SSH settings

You can index files remotely using SSH.

Here is a list of SSH settings (under server. prefix)`:

Name Default value Documentation
server.hostname null Hostname
server.port 22 Port
server.username null Username
server.password null Password
server.protocol "local" Set it to ssh
server.pem_path null Using Username / PEM file

Username / Password

Let's say you want to index from a remote server using SSH:

  • FS URL: /path/to/data/dir/on/server
  • Server: mynode.mydomain.com
  • Username: username
  • Password: password
  • Protocol: ssh (default to local)
  • Port: 22 (default to 22)
{
  "name" : "test",
  "fs" : {
    "url" : "/path/to/data/dir/on/server"
  },
  "server" : {
    "hostname" : "mynode.mydomain.com",
    "port" : 22,
    "username" : "username",
    "password" : "password",
    "protocol" : "ssh"
  }
}

Using Username / PEM file

Let's say you want to index from a remote server using SSH:

  • FS URL: /path/to/data/dir/on/server
  • Server: mynode.mydomain.com
  • Username: username
  • PEM File: /path/to/private_key.pem
  • Protocol: ssh (default to local)
  • Port: 22 (default to 22)
{
  "name" : "test",
  "fs" : {
    "url" : "/path/to/data/dir/on/server"
  },
  "server" : {
    "hostname" : "mynode.mydomain.com",
    "port" : 22,
    "username" : "username",
    "protocol" : "ssh",
	"pem_path": "/path/to/private_key.pem"
  }
}

Elasticsearch settings

Here is a list of Elasticsearch settings (under elasticsearch. prefix)`:

Name Default value Documentation
elasticsearch.index job name Index name. See Index settings
elasticsearch.type "doc" Type name. See Type name and mapping
elasticsearch.bulk_size 100 Bulk settings
elasticsearch.flush_interval "5s" Bulk settings
elasticsearch.pipeline null Using Ingest Node Pipeline (from 2.2)
elasticsearch.nodes http://127.0.0.1:9200 Node settings
elasticsearch.username null Username. See Using credentials (X-Pack) (from 2.2)
elasticsearch.password null Password. See Using credentials (X-Pack) (from 2.2)

Index settings

By default, FS crawler will index your data in an index which name is the same as the crawler name (name property). You can change it by setting index field:

{
  "name" : "test",
  "elasticsearch" : {
    "index" : "docs"
  }
}

When FS crawler needs to create the index, it applies some default settings which are read from ~/.fscrawler/_default/5/_settings.json. You can read its content from the source.

Settings define an analyzer named fscrawler_path which uses a path hierarchy tokenizer.

Type name and mapping

By default, FS crawler will index your data using doc as the type name. You can change it by setting type field:

{
  "name" : "test",
  "elasticsearch" : {
    "type" : "mydocument"
  }
}

When the FS crawler detects a new type, it creates automatically a mapping for this type. The default mapping is read from ~/.fscrawler/_default/5/doc.json which you can read from the source.

You can also display the index mapping being used with Kibana

GET docs/doc/_mapping

or fall back to the command line

curl 'http://localhost:9200/docs/_mapping?pretty'
Creating your own mapping (analyzers)

If you want to define your own mapping to set analyzers for example, you can either push the mapping or define a ~/.fscrawler/_default/5/doc.json document which contains the mapping you wish before starting the FS crawler.

The following example uses a french analyzer to index the content field.

{
  "properties" : {
    "attachment" : {
      "type" : "binary",
      "doc_values" : false
    },
    "attributes" : {
      "properties" : {
        "group" : {
          "type" : "keyword"
        },
        "owner" : {
          "type" : "keyword"
        }
      }
    },
    "content" : {
      "type" : "text",
      "analyzer" : "french"
    },
    "file" : {
      "properties" : {
        "content_type" : {
          "type" : "keyword"
        },
        "filename" : {
          "type" : "keyword"
        },
        "extension" : {
          "type" : "keyword"
        },
        "filesize" : {
          "type" : "long"
        },
        "indexed_chars" : {
          "type" : "long"
        },
        "indexing_date" : {
          "type" : "date",
          "format" : "dateOptionalTime"
        },
        "last_modified" : {
          "type" : "date",
          "format" : "dateOptionalTime"
        },
        "checksum": {
          "type": "keyword"
        },
        "url" : {
          "type" : "keyword",
          "index" : false
        }
      }
    },
    "meta" : {
      "properties" : {
        "author" : {
          "type" : "text"
        },
        "date" : {
          "type" : "date",
          "format" : "dateOptionalTime"
        },
        "keywords" : {
          "type" : "text"
        },
        "title" : {
          "type" : "text"
        },
        "language" : {
          "type" : "keyword"
        }
      }
    },
    "path" : {
      "properties" : {
        "encoded" : {
          "type" : "keyword"
        },
        "real" : {
          "type" : "keyword",
          "fields": {
            "tree": {
              "type" : "text",
              "analyzer": "fscrawler_path",
              "fielddata": true
            }
          }
        },
        "root" : {
          "type" : "keyword"
        },
        "virtual" : {
          "type" : "keyword",
          "fields": {
            "tree": {
              "type" : "text",
              "analyzer": "fscrawler_path",
              "fielddata": true
            }
          }
        }
      }
    }
  }
}

Note that if you want to push manually the mapping to elasticsearch you can use the classic REST calls:

# Create index (don't forget to add the fscrawler_path analyzer)
PUT docs
{
  "settings": {
    "analysis": {
      "analyzer": {
        "fscrawler_path": {
          "tokenizer": "fscrawler_path"
        }
      },
      "tokenizer": {
        "fscrawler_path": {
          "type": "path_hierarchy"
        }
      }
    }
  }
}

# Create the mapping
PUT docs/doc/_mapping
{
  // Same mapping as previously seen
}
Define explicit mapping/settings per job

Let's say you created a job named job_name and you are sending documents against an elasticsearch cluster running version 5.x.

If you create the following files, they will be picked up at job start time instead of the default ones:

  • ~/.fscrawler/{job_name}/_mappings/5/doc.json
  • ~/.fscrawler/{job_name}/_mappings/5/folder.json
  • ~/.fscrawler/{job_name}/_mappings/5/_settings.json

You can do the same for other elasticsearch versions with:

  • ~/.fscrawler/{job_name}/_mappings/1/doc.json for 1.x series
  • ~/.fscrawler/{job_name}/_mappings/1/folder.json for 1.x series
  • ~/.fscrawler/{job_name}/_mappings/1/_settings.json for 1.x series
  • ~/.fscrawler/{job_name}/_mappings/2/doc.json for 2.x series
  • ~/.fscrawler/{job_name}/_mappings/2/folder.json for 2.x series
  • ~/.fscrawler/{job_name}/_mappings/2/_settings.json for 1.x series
Replace existing mapping

Unfortunately you can not change the mapping on existing data. Therefore, you'll need first to remove existing index, which means remove all existing data, and then restart FS crawler with the new mapping.

You might to try elasticsearch Reindex API though.

Upgrading an existing mapping

It could happen that you would like to add new sub fields or are upgrading from a previous version of FS crawler which requires that you upgrade the mapping before sending the first documents.

The --upgrade_mapping option will help you.

The following command will upgrade the mappings related to the job_name job and then will run normally:

bin/fscrawler job_name --upgrade_mapping

If you just want to upgrade the mapping without launching the job itself, you can use the loop option:

bin/fscrawler job_name --upgrade_mapping --loop 0

Bulk settings

FS crawler is using bulks to send data to elasticsearch. By default the bulk is executed every 100 operations or every 5 seconds. You can change default settings using bulk_size and flush_interval:

{
  "name" : "test",
  "elasticsearch" : {
    "bulk_size" : 1000,
    "flush_interval" : "2s"
  }
}

Using Ingest Node Pipeline

If you are using an elasticsearch cluster running a 5.0 or superior version, you can use an Ingest Node pipeline to transform documents sent by FS crawler before they are actually indexed.

For example, if you have the following pipeline:

PUT _ingest/pipeline/fscrawler
{
  "description" : "fscrawler pipeline",
  "processors" : [
    {
      "set" : {
        "field": "foo",
        "value": "bar"
      }
    }
  ]
}

In FS crawler settings, set the elasticsearch.pipeline option:

{
  "name" : "test",
  "elasticsearch" : {
    "pipeline" : "fscrawler"
  }
}

Note that this option is available from FS crawler 2.2.

Node settings

FS crawler is using elasticsearch REST layer to send data to your running cluster. By default, it connects to 127.0.0.1 on port 9200 which are the default settings when running a local node on your machine.

Of course, in production, you would probably change this and connect to a production cluster:

{
  "name" : "test",
  "elasticsearch" : {
    "nodes" : [
      { "host" : "mynode1.mycompany.com", "port" : 9200, "scheme" : "HTTP" }
    ]
  }
}

You can define multiple nodes:

{
  "name" : "test",
  "elasticsearch" : {
    "nodes" : [
      { "host" : "mynode1.mycompany.com", "port" : 9200, "scheme" : "HTTP" },
      { "host" : "mynode2.mycompany.com", "port" : 9200, "scheme" : "HTTP" },
      { "host" : "mynode3.mycompany.com", "port" : 9200, "scheme" : "HTTP" }
    ]
  }
}

You can use HTTPS instead of default HTTP (from 2.2):

{
  "name" : "test",
  "elasticsearch" : {
    "nodes" : [
      { "host" : "CLUSTERID.eu-west-1.aws.found.io", "port" : 9243, "scheme" : "HTTPS" }
    ]
  }
}

Using Credentials (X-Pack)

If you secured your elasticsearch cluster with X-Pack, you can provide username and password to FS crawler:

{
  "name" : "test",
  "elasticsearch" : {
    "username" : "elastic",
    "password" : "changeme"
  }
}

WARNING: note that for the current version, the elasticsearch password is stored in plain text in your job setting file.

A better practice is to only set the username or pass it with --username elastic option when starting FS Crawler.

If the password is not defined, you will be prompted when starting the job:

22:46:42,528 INFO  [f.p.e.c.f.FsCrawler] Password for elastic:

Generated fields

FS crawler creates the following fields :

Field Description Example
content Extracted content "This is my text!"
attachment BASE64 encoded binary file BASE64 Encoded document
meta.author Author if any in document metadata "David Pilato"
meta.title Title if any in document metadata "My document title"
meta.date Document date if any in document metadata "2013-04-04T15:21:35"
meta.keywords Keywords if any in document metadata ["river","fs","elasticsearch"]
meta.language Detected Language if any "fr"
meta.raw An object with all raw metadata "meta.raw.channels" : "2"
file.content_type Content Type "application/vnd.oasis.opendocument.text"
file.last_modified Last modification date 1386855978000
file.indexing_date Indexing date "2013-12-12T13:50:58.758Z"
file.filesize File size in bytes 1256362
file.indexed_chars Extracted chars if fs.indexed_chars > 0 100000
file.filename Original file name "mydocument.pdf"
file.extension Original file name extension (from 2.2) "pdf"
file.url Original file url "file://tmp/mydir/otherdir/mydocument.pdf"
file.checksum Checksum if fs.checksum set "c32eafae2587bef4b3b32f73743c3c61"
path.encoded MD5 encoded file path (for internal use) "112aed83738239dbfe4485f024cd4ce1"
path.virtual Relative path from root path "/mydir/otherdir"
path.root MD5 encoded root path (for internal use) "112aed83738239dbfe4485f024cd4ce1"
path.real Actual real path name "/tmp/mydir/otherdir/mydocument.pdf"
attributes.owner Owner name "david"
attributes.group Group name "staff"

Here is a typical JSON document generated by the crawler:

{
   "file":{
      "filename":"test.odt",
      "extension":"odt",
      "last_modified":1386855978000,
      "indexing_date":"2013-12-12T13:50:58.758Z",
      "content_type":"application/vnd.oasis.opendocument.text",
      "url":"file:///tmp/testfs_metadata/test.odt",
      "indexed_chars":100000,
      "filesize":8355,
      "checksum":"c32eafae2587bef4b3b32f73743c3c61"
   },
   "path":{
      "encoded":"bceb3913f6d793e915beb70a4735592",
      "root":"bceb3913f6d793e915beb70a4735592",
      "virtual":"/",
      "real":"/tmp/testfs_metadata/test.odt"
   },
   "attributes": {
      "owner": "david",
      "group": "staff"
   },
   "meta":{
      "author":"David Pilato",
      "title":"Mon titre",
      "date":"2013-04-04T15:21:35",
      "keywords":[
         "fs",
         "elasticsearch",
         "crawler"
      ],
      "language":"fr"
   },
   "content":"Bonjour David\n\n\n"
}

Search examples

You can use the content field to perform full-text search on

GET docs/doc/_search
{
  "query" : {
    "match" : {
        "content" : "the quick brown fox"
    }
  }
}

You can use meta fields to perform search on.

GET docs/doc/_search
{
  "query" : {
    "term" : {
        "file.filename" : "mydocument.pdf"
    }
  }
}

Or run some aggregations on top of them, like:

GET docs/doc/_search
{
  "size": 0,
  "aggs": {
    "by_extension": {
      "terms": {
        "field": "file.extension"
      }
    }
  }
}

REST service

From 2.2, FS crawler comes with a REST service available by default at http://127.0.0.1:8080/fscrawler. To activate it, launch FS Crawler with --rest option.

FS Crawler status

To get an overview of the running service, you can call GET / endpoint:

curl http://127.0.0.1:8080/fscrawler/

It will give you a response similar to:

{
  "ok" : true,
  "version" : "2.2",
  "elasticsearch" : "5.1.1",
  "settings" : {
    "name" : "fscrawler-rest-tests",
    "fs" : {
      "url" : "/tmp/es",
      "update_rate" : "15m",
      "json_support" : false,
      "filename_as_id" : false,
      "add_filesize" : true,
      "remove_deleted" : true,
      "store_source" : false,
      "index_content" : true,
      "attributes_support" : false,
      "raw_metadata" : true,
      "xml_support" : false,
      "index_folders" : true,
      "lang_detect" : false
    },
    "elasticsearch" : {
      "nodes" : [ {
        "host" : "127.0.0.1",
        "port" : 9200,
        "scheme" : "HTTP"
      } ],
      "index" : "fscrawler-rest-tests",
      "type" : "doc",
      "bulk_size" : 100,
      "flush_interval" : "5s",
      "username" : "elastic"
    },
    "rest" : {
      "scheme" : "HTTP",
      "host" : "127.0.0.1",
      "port" : 8080,
      "endpoint" : "fscrawler"
    }
  }
}

Uploading a binary document

To upload a binary, you can call POST /_upload endpoint:

echo "This is my text" > test.txt
curl -F "[email protected]" "http://127.0.0.1:8080/fscrawler/_upload"

It will give you a response similar to:

{
  "ok" : true,
  "filename" : "test.txt",
  "url" : "http://127.0.0.1:9200/fscrawler-rest-tests/doc/dd18bf3a8ea2a3e53e2661c7fb53534"
}

The url represents the elasticsearch address of the indexed document. If you call:

curl http://127.0.0.1:9200/fscrawler-rest-tests/doc/dd18bf3a8ea2a3e53e2661c7fb53534?pretty

You will get back your document as it has been stored by elasticsearch:

{
  "_index" : "fscrawler-rest-tests",
  "_type" : "doc",
  "_id" : "dd18bf3a8ea2a3e53e2661c7fb53534",
  "_version" : 1,
  "found" : true,
  "_source" : {
    "content" : "This file contains some words.\n",
    "meta" : {
      "raw" : {
        "X-Parsed-By" : "org.apache.tika.parser.DefaultParser",
        "Content-Encoding" : "ISO-8859-1",
        "Content-Type" : "text/plain; charset=ISO-8859-1"
      }
    },
    "file" : {
      "extension" : "txt",
      "content_type" : "text/plain; charset=ISO-8859-1",
      "indexing_date" : "2017-01-04T21:01:08.043",
      "filename" : "test.txt"
    },
    "path" : {
      "virtual" : "test.txt",
      "real" : "test.txt"
    }
  }
}

If you started FS crawler in debug mode with --debug or if you pass debug=true query parameter, then the response will be much more complete:

echo "This is my text" > test.txt
curl -F "[email protected]" "http://127.0.0.1:8080/fscrawler/_upload?debug=true"

will give

{
  "ok" : true,
  "filename" : "test.txt",
  "url" : "http://127.0.0.1:9200/fscrawler-rest-tests/doc/dd18bf3a8ea2a3e53e2661c7fb53534",
  "doc" : {
    "content" : "This file contains some words.\n",
    "meta" : {
      "raw" : {
        "X-Parsed-By" : "org.apache.tika.parser.DefaultParser",
        "Content-Encoding" : "ISO-8859-1",
        "Content-Type" : "text/plain; charset=ISO-8859-1"
      }
    },
    "file" : {
      "extension" : "txt",
      "content_type" : "text/plain; charset=ISO-8859-1",
      "indexing_date" : "2017-01-04T14:05:10.325",
      "filename" : "test.txt"
    },
    "path" : {
      "virtual" : "test.txt",
      "real" : "test.txt"
    }
  }
}

Simulate Upload

If you want to get back the extracted content and its metadata but without indexing into elasticsearch you can use simulate=true query parameter:

echo "This is my text" > test.txt
curl -F "[email protected]" "http://127.0.0.1:8080/fscrawler/_upload?debug=true&simulate=true"

Document ID

By default, FS crawler encodes the filename to generate an id. Which means that if you send 2 files with the same filename test.txt, the second one will overwrite the first one because they will both share the same ID.

You can force any id you wish by adding id=YOUR_ID in the form data:

echo "This is my text" > test.txt
curl -F "[email protected]" -F "id=my-test" "http://127.0.0.1:8080/fscrawler/_upload"

There is a specific id named _auto_ where the ID will be autogenerated by elasticsearch. It means that sending twice the same file will result in 2 different documents indexed.

REST settings

Here is a list of REST service settings (under rest. prefix)`:

Name Default value Documentation
rest.scheme http Scheme. Can be either http or https
rest.host 127.0.0.1 Bound host
rest.port 8080 Bound port
rest.endpoint fscrawler Endpoint

REST service is running at http://127.0.0.1:8080/fscrawler by default.

You can change it using rest settings:

{
  "name" : "test",
  "rest" : {
    "scheme" : "HTTP",
    "host" : "192.168.0.1",
    "port" : 8180,
    "endpoint" : "my_fscrawler"
  }
}

It also means that if you are running more than one instance of FS crawler locally, you can (must) change the port.

Tips and tricks

Indexing on HDFS

There is no specific support for HDFS in FS crawler. But you can mount your HDFS on your machine and run FS crawler on this mount point. You can also read details about HDFS NFS Gateway.

OCR integration (using Tika and Tesseract)

To deal with images containing text, just install Tesseract. Tesseract will be auto-detected by Tika. Then add an image (png, jpg, ...) into your Fscrawler root directory. After the next index update, the text will be indexed and placed in "_source.content".

Using docker

To use FS crawler with docker, check docker-fscrawler recipe.

Developing on fscrawler project

If you are thinking of contributing on the project, which is highly appreciated, here are some tricks which might help.

Building

The project is built using Apache Maven. It needs Java >= 1.8.

To build it, just run:

git clone https://github.com/dadoonet/fscrawler.git
cd fscrawler
mvn clean install

You can also skip running tests with:

mvn clean install -DskipTests

Testing

Tests are now separated between unit tests and integration tests:

Integration tests

Integration tests only run when an elasticsearch cluster is running at 127.0.0.1:9400. When running with maven, an elasticsearch instance is automatically downloaded from maven central, installed and launched before integration tests start and stopped after integration tests.

This local test instance is installed under target/integration-tests/run. If you have any trouble, you can stop any running instance, then run mvn clean to clean all left data.

Note that a PID file is generated in target/integration-tests/run/es.pid.

For debugging purpose, you can still run integration tests from your IDE. Just download any version of elasticsearch you wish, and launch it with:

# elasticsearch 1.x
bin/elasticsearch -Des.http.port=9400 -Des.network.host=127.0.0.1
# elasticsearch 2.x
bin/elasticsearch -Des.http.port=9400
# elasticsearch 5.x
bin/elasticsearch -Ehttp.port=9400

Integration tests will detect the running instance and will not ignore anymore those tests.

You can also tell maven to run integration tests by deploying another version of elasticsearch:

# For elasticsearch 1.x series
mvn install -Pes-1x
mvn install -Pes-2x

By default, it will run integration tests against elasticsearch 5.x series cluster.

Running tests against an external cluster

By default, FS Crawler will run tests against a cluster running at 127.0.0.1 on port 9400. It will detect if this cluster is secured with X-Pack and if so, it will try to authenticate with user elastic and password changeme.

But, if you want to run the test suite against another cluster, using other credentials, you can use the following system parameters:

  • tests.cluster.host: hostname or IP (defaults to 127.0.0.1)
  • tests.cluster.port: port (defaults to 9400)
  • tests.cluster.scheme: HTTP or HTTPS (defaults to HTTP)
  • tests.cluster.user: username (defaults to elastic)
  • tests.cluster.pass: password (defaults to changeme)

For example, if you have a cluster running on Elastic Cloud, you can use:

mvn clean install -Dtests.cluster.host=CLUSTERID.eu-west-1.aws.found.io -Dtests.cluster.port=9200 -Dtests.cluster.user=elastic -Dtests.cluster.pass=GENERATEDPASSWORD

or better:

mvn clean install -Dtests.cluster.host=CLUSTERID.eu-west-1.aws.found.io -Dtests.cluster.port=9243 -Dtests.cluster.scheme=HTTPS -Dtests.cluster.user=elastic -Dtests.cluster.pass=GENERATEDPASSWORD

Running REST tests using another port

By default, FS crawler will run the integration tests using port 8080 for the REST service. If you want to change it because this port is already used, you can start your tests with -Dtests.rest.port=8280 which will start the REST service on port 8280

Randomized testing

FS Crawler uses Randomized testing framework. In case of failure, it will print a line like:

REPRODUCE WITH:
mvn test -Dtests.seed=AC6992149EB4B547 -Dtests.class=fr.pilato.elasticsearch.crawler.fs.test.unit.tika.TikaDocParserTest -Dtests.method="testExtractFromRtf" -Dtests.locale=ga-IE -Dtests.timezone=Canada/Saskatchewan

It also exposes some parameters you can use at build time:

  • tests.output: display test output. For example:
mvn install -Dtests.output=always
mvn install -Dtests.output=onError
  • tests.locale: run the tests using a given Locale. For example:
mvn install -Dtests.locale=random
mvn install -Dtests.locale=fr-FR
  • tests.timezone: run the tests using a given Timezone. For example:
mvn install -Dtests.timezone=random
mvn install -Dtests.timezone=CEST
mvn install -Dtests.timezone=-0200
  • tests.verbose: adds running tests details while executing tests
mvn install -Dtests.verbose
  • tests.parallelism: number of JVMs to start to run tests
mvn install -Dtests.parallelism=auto
mvn install -Dtests.parallelism=max
mvn install -Dtests.parallelism=1
  • tests.seed: specify the seed to use to run the test suite if you need to reproduce a failure given a specific test context.
mvn test -Dtests.seed=E776CE45185A6E7A
  • tests.leaveTemporary: leave temporary files on disk
mvn test -Dtests.leaveTemporary

Releasing

To release a version, just run:

./release.sh

The release script will:

  • Create a release branch
  • Replace SNAPSHOT version by the final version number
  • Commit the change
  • Run tests against elasticsearch 1.x series
  • Run tests against elasticsearch 2.x series
  • Run tests against elasticsearch 5.x series
  • Build the final artifacts using release profile (signing artifacts and generating all needed files)
  • Tag the version
  • Prepare the announcement email
  • Deploy to https://oss.sonatype.org/
  • Prepare the next SNAPSHOT version
  • Commit the change
  • Release the Sonatype staging repository
  • Merge the release branch to the branch we started from
  • Push the changes to origin
  • Announce the version on https://discuss.elastic.co/c/annoucements/community-ecosystem

You will be guided through all the steps.

License

This software is licensed under the Apache 2 license, quoted below.

Copyright 2011-2017 David Pilato

Licensed under the Apache License, Version 2.0 (the "License"); you may not
use this file except in compliance with the License. You may obtain a copy of
the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
License for the specific language governing permissions and limitations under
the License.

fscrawler's People

Contributors

dadoonet avatar shadiakiki1986 avatar it20one avatar babadofar avatar kneubi avatar edjeavons avatar freddut avatar barts2108 avatar fgaujous avatar soruly avatar

Watchers

James Cloos avatar Ray Lugo, Jr. avatar avatar

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.