raunvk / bolt-iot-netwizard

IoT based Network Scouting & Anomaly Detection

bolt-iot-netwizard

Blog Link : https://www.hackster.io/raunakd137/bolt-iot-netwizard-3fc58d

Description : IoT based Network Scouting & Anomaly Detection

Hardware Requirement : Wireless Network Adapter (optional), Bolt IoT Device, Buzzer, LED, 330 Ohm Resistor, Connecting Wires

Requisite : Make sure you have Python3 and Pip installed in your System

How to Run (Linux) :

1. Use the Wireless Network Adapter to connect to your WiFi (optional)

2. Setup the Bolt IoT Device circuit connection as shown below

3. Install requirements.txt to install necessary packages [$ python3 -m pip install -r requirements.txt]

4. Edit conf.py and add your own credentials [$ nano conf.py]

5. Run wifiscout.py to monitor connected devices in your WiFi Network and send Telegram alerts [$ sudo python3 wifiscout.py]

6. The no. of times LED is going to flash will indicate no. of devices connected in your Wifi Network

7. Run pingmaster.py to detect Internet Ping anomalies by Z-Score analysis and send Telegram alerts [$ sudo python3 pingmaster.py]

8. When the buzzer is going to turn on, it will indicate an Internet Ping anomaly has been detected

9. Run netwizard.py to do BOTH simultaneuosly [$ sudo python3 netwizard.py]

Circuit Connection :