rapidsai-csp-utils's Issues
Add logic to always install a compatible version of RAPIDS, as Pascal GPUs won't be supported In RAPIDS 24.02+,
As per https://docs.rapids.ai/notices/rsn0034/, Pascal GPU support will be deprecated. This effectively means that the last Pascal compatible RAPIDS version will be 23.12. We need to add logic to our code so that even if a user gets a Pascal GPU (P4/P100), they will still be able to seamlessly install the compatible version of RAPIDS and try out the software.
[FEA] add option to bypass prompt
when using the script rapidsai-csp-utils/colab/rapids-colab.sh to enable rapids in a colab environment, there are two prompts:
- one for the version number
- one to verify the script is up to date
after one goes through the trouble of using that script, one always answers the same to those prompts, and it is cumbersome when restarting notebook, especially given that the entire process takes a while.
it would be nice to have a CLI to bypass those options, for instance to specify the version of rapids, and to bypass the check.
another useful commandline would be to specify a subset of the libraries that is intended to be used. For instance, I have used RAPIDS to have quick evaluation using TSNE, and would like to just install cuml on that instance.
colab pip install notebook isn’t working
https://colab.research.google.com/drive/13sspqiEZwso4NYTbsflpPyNFaVAAxUgr#scrollTo=xgAFgI15ddf6 from image attached on https://rapids.ai/
gives
----> 1 import cudf
2 cudf.__version__
ModuleNotFoundError: No module named 'cudf'
Unable to install/import CUML
Once I run "!python rapidsai-csp-utils/colab/pip-install.py", I get the following error:
Woo! Your instance has the right kind of GPU, a Tesla T4!
We will now install RAPIDS cuDF, cuML, and cuGraph via pip!
Please stand by, should be quick...
Looking in indexes: https://pypi.org/simple, https://pypi.nvidia.com/
Collecting cudf-cu11
Using cached https://pypi.nvidia.com/cudf-cu11/cudf_cu11-23.12.0-cp310-cp310-manylinux_2_28_x86_64.whl (506.4 MB)
Collecting cuml-cu11
Using cached cuml-cu11-23.12.0.tar.gz (6.8 kB)
Preparing metadata (setup.py): started
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip.
Preparing metadata (setup.py): finished with status 'error'
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
Requirement already satisfied: cupy-cuda11x in /usr/local/lib/python3.10/dist-packages (11.0.0)
Requirement already satisfied: numpy<1.26,>=1.20 in /usr/local/lib/python3.10/dist-packages (from cupy-cuda11x) (1.23.5)
Requirement already satisfied: fastrlock>=0.5 in /usr/local/lib/python3.10/dist-packages (from cupy-cuda11x) (0.8.2)
***********************************************************************
The pip install of RAPIDS is complete.
Please do not run any further installation from the conda based installation methods, as they may cause issues!
Please ensure that you're pulling from the git repo to remain updated with the latest working install scripts.
r
Troubleshooting:
- If there is an installation failure, please check back on RAPIDSAI owned templates/notebooks to see how to update your personal files.
- If an installation failure persists when using the latest script, please make an issue on https://github.com/rapidsai-community/rapidsai-csp-utils
***********************************************************************
ModuleNotFoundError: No module named 'pyarrow._cuda'
After running your recent script in Colab I got the following error trying to run import cudf as cdf
cell:
ModuleNotFoundError Traceback (most recent call last)
in ()
----> 1 import cudf as cdf
2 frames
/usr/local/lib/python3.7/site-packages/cudf/_lib/init.py in ()
2 import numpy as np
3
----> 4 from . import (
5 avro,
6 binaryop,
cudf/_lib/gpuarrow.pyx in init cudf._lib.gpuarrow()
ModuleNotFoundError: No module named 'pyarrow._cuda'
Error Installing RAPIDS on Google Colab
Unable to import cudf
!git clone https://github.com/rapidsai/rapidsai-csp-utils.git
!python rapidsai-csp-utils/colab/env-check.py
!python rapidsai-csp-utils/colab/pip-install.py
I have been having trouble installing rapids on Collab since this evening.
Error:
Cloning into 'rapidsai-csp-utils'...
remote: Enumerating objects: 400, done.
remote: Counting objects: 100% (131/131), done.
remote: Compressing objects: 100% (80/80), done.
remote: Total 400 (delta 95), reused 53 (delta 51), pack-reused 269
Receiving objects: 100% (400/400), 109.81 KiB | 6.86 MiB/s, done.
Resolving deltas: 100% (197/197), done.
/content/rapidsai-csp-utils
error: pathspec 'patch-22.12' did not match any file(s) known to git
/content
Collecting pynvml
Downloading pynvml-11.5.0-py3-none-any.whl (53 kB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 53.1/53.1 kB 840.8 kB/s eta 0:00:00
Installing collected packages: pynvml
Successfully installed pynvml-11.5.0
Woo! Your instance has the right kind of GPU, a Tesla T4!
We will now install RAPIDS via pip! Please stand by, should be quick...
Woo! Your instance has the right kind of GPU, a Tesla T4!
We will now install RAPIDS cuDF, cuML, and cuGraph via pip!
Please stand by, should be quick...
Looking in indexes: https://pypi.org/simple, https://pypi.nvidia.com/
Collecting cudf-cu11
Downloading https://pypi.nvidia.com/cudf-cu11/cudf_cu11-23.12.0-cp310-cp310-manylinux_2_28_x86_64.whl (506.4 MB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 506.4/506.4 MB 3.0 MB/s eta 0:00:00
Collecting cuml-cu11
Downloading cuml-cu11-23.12.0.tar.gz (6.8 kB)
Preparing metadata (setup.py): started
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip.
Preparing metadata (setup.py): finished with status 'error'
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
Requirement already satisfied: cupy-cuda11x in /usr/local/lib/python3.10/dist-packages (11.0.0)
Requirement already satisfied: numpy<1.26,>=1.20 in /usr/local/lib/python3.10/dist-packages (from cupy-cuda11x) (1.23.5)
Requirement already satisfied: fastrlock>=0.5 in /usr/local/lib/python3.10/dist-packages (from cupy-cuda11x) (0.8.2)
***********************************************************************
The pip install of RAPIDS is complete.
Please do not run any further installation from the conda based installation methods, as they may cause issues!
Please ensure that you're pulling from the git repo to remain updated with the latest working install scripts.
r
Troubleshooting:
- If there is an installation failure, please check back on RAPIDSAI owned templates/notebooks to see how to update your personal files.
- If an installation failure persists when using the latest script, please make an issue on https://github.com/rapidsai-community/rapidsai-csp-utils
***********************************************************************
module not find error
ModuleNotFoundError Traceback (most recent call last)
in <cell line: 3>()
1 get_ipython().system('git clone https://github.com/rapidsai/rapidsai-csp-utils.git')
2 get_ipython().system('bash rapidsai-csp-utils/colab/rapids-colab.sh stable')
----> 3 import cuml
ModuleNotFoundError: No module named 'cuml'
NOTE: If your import is failing due to a missing package, you can
manually install dependencies using either !pip or !apt.
To view examples of installing some common dependencies, click the
"Open Examples" button below.
rapids-colab-template.ipynb - blazingsql not working correctly on Colab - 23Jun21
Hi!
I followed the steps as indicated in the recent article on 21.06: https://medium.com/rapids-ai/rapids-release-21-06-f9bd2e5a9aa4
Using the new notebook and a Colab Pro subscription, I was able to successfully launch a test using -> import cudf <- YAY!
However, when I tried to run -> from blazingsql import BlazingContext <-, it fails.
Please find attached a screenshot of the error. I am open to help test the issue once the code has been resolved.
Thanks!
--Todd
Update Colab's Python from 3.6 to 3.7
Currently, Colab uses pythng 3.6 Our install files also use python 3.6 However, with RAPIDS 0.15, we will be using only python 3.7 and above. This may cause some issues. We need to update the installation script and test it to support python 3.7 or 3.8
Add testing guide
Changes to this repo should be tested with Colab. It would be helpful if this repository had a guide for running those tests (e.g. linking to test notebooks, explaining how to test a PR to this repo with those notebooks).
ModuleNotFoundError: No module named 'BlazingSQL' Error after Installing RAPIDS with 'python rapidsai-csp-utils/colab/install_rapids.py <release> <packages>'
Hello,
I installed successfully following script on Google Colab:
Installing RAPIDS is now 'python rapidsai-csp-utils/colab/install_rapids.py '
The options are 'stable' and 'nightly'. Leaving it blank or adding any other words will default to stable.
The option are default blank or 'core'. By default, we install RAPIDSAI and BlazingSQL. The 'core' option will install only RAPIDSAI and not include BlazingSQL,
!python rapidsai-csp-utils/colab/install_rapids.py stable
import os
os.environ['NUMBAPRO_NVVM'] = '/usr/local/cuda/nvvm/lib64/libnvvm.so'
os.environ['NUMBAPRO_LIBDEVICE'] = '/usr/local/cuda/nvvm/libdevice/'
os.environ['CONDA_PREFIX'] = '/usr/local'
But I am getting following Error for BlazingSQL Module:
ModuleNotFoundError Traceback (most recent call last)
in ()
----> 1 from BlazingSQL import BlazingContext
2 import cudf
3
4 bc = BlazingContext()
ModuleNotFoundError: No module named 'BlazingSQL'
What is missing? I got same error with "nightly" release.
Thanks,
Stuck on "Solving Environment"
Hi! When trying to run the install script, I'll make it up until the part with Installing RAPIDS, and it will hang there in Colab. I stopped it after about 15 minutes. Here was my trace, I have Colab Pro as well if that is helpful:
PLEASE READ
********************************************************************************************************
Changes:
1. Now that most people have migrated, we have rem0ved the migration notice.
2. default stable version is now 0.13. Nightly is now 0.14
3. You can now declare your RAPIDS version as a CLI option and skip the user prompts (ex: '0.13' or '0.14', between 0.11 to 0.14, without the quotes):
"!bash rapidsai-csp-utils/colab/rapids-colab.sh <version/label>"
Examples: '!bash rapidsai-csp-utils/colab/rapids-colab.sh 0.13', or '!bash rapidsai-csp-utils/colab/rapids-colab.sh stable', or '!bash rapidsai-csp-utils/colab/rapids-colab.sh s'
'!bash rapidsai-csp-utils/colab/rapids-colab.sh 0.14, or '!bash rapidsai-csp-utils/colab/rapids-colab.sh nightly', or '!bash rapidsai-csp-utils/colab/rapids-colab.sh n'
Enjoy using RAPIDS!
As you didn't specify a RAPIDS version, please enter in the box your desired RAPIDS version (ex: '0.11' or '0.12', between 0.11 to 0.14, without the quotes)
and hit Enter. If you need stability, use 0.13. If you want bleeding edge, use our nightly version (0.14), but understand that caveats that come with nightly versions.
0.13
RAPIDS Version to install is 0.13
Checking for GPU type:
***********************************************************************
Woo! Your instance has the right kind of GPU, a 'Tesla P100-PCIE-16GB'!
***********************************************************************
Removing conflicting packages, will replace with RAPIDS compatible versions
Uninstalling xgboost-0.90:
Successfully uninstalled xgboost-0.90
Uninstalling dask-2.12.0:
Successfully uninstalled dask-2.12.0
Uninstalling distributed-1.25.3:
Successfully uninstalled distributed-1.25.3
Installing conda
--2020-04-14 19:37:20-- https://repo.continuum.io/miniconda/Miniconda3-4.5.4-Linux-x86_64.sh
Resolving repo.continuum.io (repo.continuum.io)... 104.18.201.79, 104.18.200.79, 2606:4700::6812:c94f, ...
Connecting to repo.continuum.io (repo.continuum.io)|104.18.201.79|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://repo.anaconda.com/miniconda/Miniconda3-4.5.4-Linux-x86_64.sh [following]
--2020-04-14 19:37:20-- https://repo.anaconda.com/miniconda/Miniconda3-4.5.4-Linux-x86_64.sh
Resolving repo.anaconda.com (repo.anaconda.com)... 104.16.130.3, 104.16.131.3, 2606:4700::6810:8203, ...
Connecting to repo.anaconda.com (repo.anaconda.com)|104.16.130.3|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 58468498 (56M) [application/x-sh]
Saving to: ‘Miniconda3-4.5.4-Linux-x86_64.sh’
Miniconda3-4.5.4-Li 100%[===================>] 55.76M 155MB/s in 0.4s
2020-04-14 19:37:21 (155 MB/s) - ‘Miniconda3-4.5.4-Linux-x86_64.sh’ saved [58468498/58468498]
PREFIX=/usr/local
installing: python-3.6.5-hc3d631a_2 ...
Python 3.6.5 :: Anaconda, Inc.
installing: ca-certificates-2018.03.07-0 ...
installing: conda-env-2.6.0-h36134e3_1 ...
installing: libgcc-ng-7.2.0-hdf63c60_3 ...
installing: libstdcxx-ng-7.2.0-hdf63c60_3 ...
installing: libffi-3.2.1-hd88cf55_4 ...
installing: ncurses-6.1-hf484d3e_0 ...
installing: openssl-1.0.2o-h20670df_0 ...
installing: tk-8.6.7-hc745277_3 ...
installing: xz-5.2.4-h14c3975_4 ...
installing: yaml-0.1.7-had09818_2 ...
installing: zlib-1.2.11-ha838bed_2 ...
installing: libedit-3.1.20170329-h6b74fdf_2 ...
installing: readline-7.0-ha6073c6_4 ...
installing: sqlite-3.23.1-he433501_0 ...
installing: asn1crypto-0.24.0-py36_0 ...
installing: certifi-2018.4.16-py36_0 ...
installing: chardet-3.0.4-py36h0f667ec_1 ...
installing: idna-2.6-py36h82fb2a8_1 ...
installing: pycosat-0.6.3-py36h0a5515d_0 ...
installing: pycparser-2.18-py36hf9f622e_1 ...
installing: pysocks-1.6.8-py36_0 ...
installing: ruamel_yaml-0.15.37-py36h14c3975_2 ...
installing: six-1.11.0-py36h372c433_1 ...
installing: cffi-1.11.5-py36h9745a5d_0 ...
installing: setuptools-39.2.0-py36_0 ...
installing: cryptography-2.2.2-py36h14c3975_0 ...
installing: wheel-0.31.1-py36_0 ...
installing: pip-10.0.1-py36_0 ...
installing: pyopenssl-18.0.0-py36_0 ...
installing: urllib3-1.22-py36hbe7ace6_0 ...
installing: requests-2.18.4-py36he2e5f8d_1 ...
installing: conda-4.5.4-py36_0 ...
installation finished.
WARNING:
You currently have a PYTHONPATH environment variable set. This may cause
unexpected behavior when running the Python interpreter in Miniconda3.
For best results, please verify that your PYTHONPATH only points to
directories of packages that are compatible with the Python interpreter
in Miniconda3: /usr/local
Solving environment: done
==> WARNING: A newer version of conda exists. <==
current version: 4.5.4
latest version: 4.8.3
Please update conda by running
$ conda update -n base conda
## Package Plan ##
environment location: /usr/local
added / updated specs:
- openssl
- python=3.6
The following packages will be downloaded:
package | build
---------------------------|-----------------
ca-certificates-2020.4.5.1 | hecc5488_0 146 KB conda-forge
_openmp_mutex-4.5 | 0_gnu 435 KB conda-forge
tk-8.6.10 | hed695b0_0 3.2 MB conda-forge
libgcc-ng-9.2.0 | h24d8f2e_2 8.2 MB conda-forge
certifi-2020.4.5.1 | py36h9f0ad1d_0 151 KB conda-forge
ld_impl_linux-64-2.34 | h53a641e_0 616 KB conda-forge
zlib-1.2.11 | h516909a_1006 105 KB conda-forge
xz-5.2.5 | h516909a_0 430 KB conda-forge
wheel-0.34.2 | py_1 24 KB conda-forge
libstdcxx-ng-9.2.0 | hdf63c60_2 4.5 MB conda-forge
setuptools-46.1.3 | py36h9f0ad1d_0 653 KB conda-forge
python_abi-3.6 | 1_cp36m 4 KB conda-forge
python-3.6.10 |h8356626_1010_cpython 34.1 MB conda-forge
openssl-1.1.1f | h516909a_0 2.1 MB conda-forge
sqlite-3.30.1 | hcee41ef_0 2.0 MB conda-forge
libgomp-9.2.0 | h24d8f2e_2 816 KB conda-forge
pip-20.0.2 | py_2 1.0 MB conda-forge
_libgcc_mutex-0.1 | conda_forge 3 KB conda-forge
libffi-3.2.1 | he1b5a44_1007 47 KB conda-forge
ncurses-6.1 | hf484d3e_1002 1.3 MB conda-forge
readline-8.0 | hf8c457e_0 441 KB conda-forge
------------------------------------------------------------
Total: 60.2 MB
The following NEW packages will be INSTALLED:
_libgcc_mutex: 0.1-conda_forge conda-forge
_openmp_mutex: 4.5-0_gnu conda-forge
ld_impl_linux-64: 2.34-h53a641e_0 conda-forge
libgomp: 9.2.0-h24d8f2e_2 conda-forge
python_abi: 3.6-1_cp36m conda-forge
The following packages will be UPDATED:
ca-certificates: 2018.03.07-0 --> 2020.4.5.1-hecc5488_0 conda-forge
certifi: 2018.4.16-py36_0 --> 2020.4.5.1-py36h9f0ad1d_0 conda-forge
libffi: 3.2.1-hd88cf55_4 --> 3.2.1-he1b5a44_1007 conda-forge
libgcc-ng: 7.2.0-hdf63c60_3 --> 9.2.0-h24d8f2e_2 conda-forge
libstdcxx-ng: 7.2.0-hdf63c60_3 --> 9.2.0-hdf63c60_2 conda-forge
ncurses: 6.1-hf484d3e_0 --> 6.1-hf484d3e_1002 conda-forge
openssl: 1.0.2o-h20670df_0 --> 1.1.1f-h516909a_0 conda-forge
pip: 10.0.1-py36_0 --> 20.0.2-py_2 conda-forge
python: 3.6.5-hc3d631a_2 --> 3.6.10-h8356626_1010_cpython conda-forge
readline: 7.0-ha6073c6_4 --> 8.0-hf8c457e_0 conda-forge
setuptools: 39.2.0-py36_0 --> 46.1.3-py36h9f0ad1d_0 conda-forge
sqlite: 3.23.1-he433501_0 --> 3.30.1-hcee41ef_0 conda-forge
tk: 8.6.7-hc745277_3 --> 8.6.10-hed695b0_0 conda-forge
wheel: 0.31.1-py36_0 --> 0.34.2-py_1 conda-forge
xz: 5.2.4-h14c3975_4 --> 5.2.5-h516909a_0 conda-forge
zlib: 1.2.11-ha838bed_2 --> 1.2.11-h516909a_1006 conda-forge
Downloading and Extracting Packages
ca-certificates-2020 | 146 KB | : 100% 1.0/1 [00:00<00:00, 8.21it/s]
_openmp_mutex-4.5 | 435 KB | : 100% 1.0/1 [00:00<00:00, 9.65it/s]
tk-8.6.10 | 3.2 MB | : 100% 1.0/1 [00:00<00:00, 1.28it/s]
libgcc-ng-9.2.0 | 8.2 MB | : 100% 1.0/1 [00:01<00:00, 1.38s/it]
certifi-2020.4.5.1 | 151 KB | : 100% 1.0/1 [00:00<00:00, 10.15it/s]
ld_impl_linux-64-2.3 | 616 KB | : 100% 1.0/1 [00:00<00:00, 5.75it/s]
zlib-1.2.11 | 105 KB | : 100% 1.0/1 [00:00<00:00, 14.08it/s]
xz-5.2.5 | 430 KB | : 100% 1.0/1 [00:00<00:00, 5.94it/s]
wheel-0.34.2 | 24 KB | : 100% 1.0/1 [00:00<00:00, 13.23it/s]
libstdcxx-ng-9.2.0 | 4.5 MB | : 100% 1.0/1 [00:00<00:00, 1.24it/s]
setuptools-46.1.3 | 653 KB | : 100% 1.0/1 [00:00<00:00, 4.15it/s]
python_abi-3.6 | 4 KB | : 100% 1.0/1 [00:00<00:00, 22.59it/s]
python-3.6.10 | 34.1 MB | : 100% 1.0/1 [00:05<00:00, 5.52s/it]
openssl-1.1.1f | 2.1 MB | : 100% 1.0/1 [00:00<00:00, 2.30it/s]
sqlite-3.30.1 | 2.0 MB | : 100% 1.0/1 [00:00<00:00, 2.55it/s]
libgomp-9.2.0 | 816 KB | : 100% 1.0/1 [00:00<00:00, 6.26it/s]
pip-20.0.2 | 1.0 MB | : 100% 1.0/1 [00:00<00:00, 2.79it/s]
_libgcc_mutex-0.1 | 3 KB | : 100% 1.0/1 [00:00<00:00, 25.78it/s]
libffi-3.2.1 | 47 KB | : 100% 1.0/1 [00:00<00:00, 15.10it/s]
ncurses-6.1 | 1.3 MB | : 100% 1.0/1 [00:01<00:00, 1.15s/it]
readline-8.0 | 441 KB | : 100% 1.0/1 [00:00<00:00, 6.39it/s]
Preparing transaction: done
Verifying transaction: done
Executing transaction: done
Installing RAPIDS 0.13 packages from the stable release channel
Please standby, this will take a few minutes...
Solving environment: failed
CondaError: KeyboardInterrupt
Copying shared object files to /usr/lib
cp: cannot stat '/usr/local/lib/libcudf.so': No such file or directory
cp: cannot stat '/usr/local/lib/librmm.so': No such file or directory
cp: cannot stat '/usr/local/lib/libnccl.so': No such file or directory
Copying RAPIDS compatible xgboost
cp: cannot stat '/usr/local/lib/libxgboost.so': No such file or directory
************************************************
Your Google Colab instance has RAPIDS installed!
************************************************
Let me know if more information is needed, thanks!
COLAB preinstalled CUDA toolkit version is 10.1
when check the version of cudatoolkit, pre-installed version is 10.1
Python 3.6.9
Cuda compilation tools, release 10.1, V10.1.243
conda install support 10.1 but csp utils script provide only 10.0 for stable and nightly build.
In the environment, rapids works well. However, when I try to integrate rapids to other legacy tools such as py-openmm, it have problem to load module. It need to detect pre-installed CUDA toolkit version and select proper one.
update_modules.py
parallel_for failed: cudaErrorNoKernelImageForDevice: no kernel image is available for execution on the device
This is the error i got
module not find error
ModuleNotFoundError: No module named 'cuml'
NOTE: If your import is failing due to a missing package, you can
manually install dependencies using either !pip or !apt.
To view examples of installing some common dependencies, click the
"Open Examples" button below.
Can't import cupy
After installing all thing from colab template this error occures while im trying to import cupy
ImportError Traceback (most recent call last)
/usr/local/lib/python3.10/site-packages/cupy/init.py in
16 try:
---> 17 from cupy import _core # NOQA
18 except ImportError as exc:
4 frames
/usr/local/lib/python3.10/site-packages/cupy/_core/init.py in
2
----> 3 from cupy._core import core # NOQA
4 from cupy._core import fusion # NOQA
cupy/_core/core.pyx in init cupy._core.core()
/usr/local/lib/python3.10/site-packages/cupy/cuda/init.py in
7 from cupy._environment import get_hipcc_path # NOQA
----> 8 from cupy.cuda import compiler # NOQA
9 from cupy.cuda import device # NOQA
/usr/local/lib/python3.10/site-packages/cupy/cuda/compiler.py in
12
---> 13 from cupy.cuda import device
14 from cupy.cuda import function
cupy/cuda/device.pyx in init cupy.cuda.device()
ImportError: cannot import name syncdetect
The above exception was the direct cause of the following exception:
ImportError Traceback (most recent call last)
in <cell line: 1>()
----> 1 import cupy, cuml, cugraph, cuspatial
/usr/local/lib/python3.10/site-packages/cupy/init.py in
17 from cupy import _core # NOQA
18 except ImportError as exc:
---> 19 raise ImportError(f'''
20 ================================================================
21 {_environment._diagnose_import_error()}
ImportError:
Failed to import CuPy.
If you installed CuPy via wheels (cupy-cudaXXX or cupy-rocm-X-X), make sure that the package matches with the version of CUDA or ROCm installed.
On Linux, you may need to set LD_LIBRARY_PATH environment variable depending on how you installed CUDA/ROCm.
On Windows, try setting CUDA_PATH environment variable.
Check the Installation Guide for details:
https://docs.cupy.dev/en/latest/install.html
Original error:
ImportError: cannot import name syncdetect
NOTE: If your import is failing due to a missing package, you can
manually install dependencies using either !pip or !apt.
To view examples of installing some common dependencies, click the
"Open Examples" button below.
colab conda install notebook isn’t working
https://colab.research.google.com/drive/1TAAi_szMfWqRfHVfjGSqnGVLr_ztzUM9 from image attached on https://rapids.ai/
gives
/usr/local/lib/python3.10/site-packages/numba/__init__.py in _ensure_critical_deps()
40 raise ImportError(msg)
41 elif numpy_version > (1, 24):
---> 42 raise ImportError("Numba needs NumPy 1.24 or less")
43 try:
44 import scipy
ImportError: Numba needs NumPy 1.24 or less
[FEA] Add cusignal to rapids-colab.sh
cusignal is not installed by default for users running the RAPIDS starting notebook in colab.
No module named `pynvml`
When running the rapids-colab.ipynb
notebook:
!git clone https://github.com/rapidsai/rapidsai-csp-utils.git
!python rapidsai-csp-utils/colab/env-check.py
Cloning into 'rapidsai-csp-utils'...
remote: Enumerating objects: 300, done.
remote: Counting objects: 100% (129/129), done.
remote: Compressing objects: 100% (74/74), done.
remote: Total 300 (delta 74), reused 99 (delta 55), pack-reused 171
Receiving objects: 100% (300/300), 87.58 KiB | 17.52 MiB/s, done.
Resolving deltas: 100% (136/136), done.
Traceback (most recent call last):
File "rapidsai-csp-utils/colab/env-check.py", line 1, in
import pynvml
ModuleNotFoundError: No module named 'pynvml'
Error installing (dangling bash else statement)
When trying to following the install directions I get:
rapidsai-csp-utils/colab/rapids-colab.sh: line 70: syntax error near unexpected token `else'
See:
No module named pyarrow._cuda
I get this issue while importing cudf or cuml in colab after runned rapids.ai installation steps in the installation notebook.https://colab.research.google.com/drive/1rY7Ln6rEE1pOlfSHCYOVaqt8OvDO35J0#forceEdit=true&offline=true&sandboxMode=true
Jupyter Notebook install
Would it be possible to use this script to run on a jupyter notebook instance as well?
In my case I am running a jupyter notebook on SageMaker.
Colab - can't import cudf, following template instructions
Please excuse me if there's something obvious that I can fix myself, I'm new to using GPU for workloads
Error log:
ValueError Traceback (most recent call last)
in <cell line: 1>()
----> 1 import cudf
2 cudf.version
2 frames
/usr/local/lib/python3.10/dist-packages/cudf/_lib/init.py in
2 import numpy as np
3
----> 4 from . import (
5 avro,
6 binaryop,
avro.pyx in init cudf._lib.avro()
column.pyx in init cudf._lib.column()
scalar.pyx in init cudf._lib.scalar()
interop.pyx in init cudf._lib.interop()
ValueError: pyarrow.lib.IpcWriteOptions size changed, may indicate binary incompatibility. Expected 88 from C header, got 72 from PyObject
[FEA] Add Nightlies option to pip install for colab
With conda install about to be deprecated, pip needs to have the option for nightlies!
Add pip installation to colab script now that they have python 3.8
Colab now has Python 3.8. Both pip and ocnda packages work, but pip installs way faster. We should default to pip install, despite being EA. This may temporarily break cuspatial, cusignal, and cuxfilter capabilities, but should be rectified soon when they are released via pip.
install in colab fails just like issue #75
I don't mean to write all over again, but the issue is exactly as mentioned in #75
Just the difference is that now Colab has python 3.10.
how can this be solved?
many thanks.
[BUG] AWS DL AMI v30 fails to conda solve for RAPIDS out of the box
Problem
Community User, @jacksonloper, brought to our attention that using the AWS DL AMI v30 fails to solve for RAPIDS. Further inspect reveals that this issue is due to an inconsistent environment:
The environment is inconsistent, please check the package plan carefully
The following packages are causing the inconsistency:
- defaults/noarch::numpydoc==0.9.2=py_0
- defaults/noarch::sphinx==3.0.4=py_0
- defaults/noarch::s3fs==0.4.0=py_0
- defaults/linux-64::spyder==4.1.2=py37_0
Current Workaround(s):
- Installing anaconda and updating will fix this issue (shown below). It will still need to retry solving, as shown by the print out in the comments below. User says that while this method works, it extends the conda install time of RAPIDS to nearly 15 minutes.
conda install -y anaconda
conda update -y --all
conda install -y -c rapidsai -c nvidia -c conda-forge -c defaults rapids=0.14 python=3.7 cudatoolkit=10.2
- Using a vanilla Ubuntu 18.04 image on the same EC2 instance
Machine specs:
- Image: deep learning ubuntu 18.04 version 30 AMI
- EC2 instance: p3.2xlarge
- RAPIDS version: 0.14
- Install Type: conda
Conda notebook says it's installing via pip
The Colab notebook that installs RAPIDS via conda shows a message that it will install with pip, and to "stand by." This is confusing because the cell completes but doesn't install RAPIDS with pip as it says.
https://colab.research.google.com/drive/1TAAi_szMfWqRfHVfjGSqnGVLr_ztzUM9#scrollTo=B0C8IV5TQnjN
rapidsai-csp-utils/colab/env-check.py
Line 31 in 734c8d0
Remove/refactor scripts
There are some other scripts that seem unnecessary:
update_gcc.sh
can probably go away since the GCC version is 11.4 nowrapids-colab.sh
appears to target RAPIDS 21.06 and has notices about BlazingSQL. This can probably go away?env-check.py
andpip-install.py
seem to have a lot of duplicated logic. Let's simplify this.
GridsearchCV issue using cuML
Hi, I am trying to perform hyperparameter tuning on cuML instead of the CPU target sklearn package. I have import the package in the same way as follow:
import time
import cuml
from cuml.ensemble import RandomForestClassifier
from cuml.model_selection import GridSearchCV
from cuml.metrics import accuracy_score
start_time = time.time()
create a random forest classifier object
rfc = RandomForestClassifier()
set up the parameter grid for hyperparameter tuning
param_grid = {
'n_estimators': [100, 200, 300],
'max_features': ['auto', 'sqrt', 'log2'],
'max_depth': [5, 10, 15, None],
'min_samples_split': [2, 5, 10],
'min_samples_leaf': [1, 2, 4]
}
set up the GridSearchCV object with cross-validation
grid_search = GridSearchCV(rfc, param_grid=param_grid, cv=5, scoring='accuracy', n_jobs=-1, verbose=1)
fit the GridSearchCV object on the training data
grid_search.fit(X_train_cudf, Y_train_cudf)
get the best parameters and the best score
best_params = grid_search.best_params_
best_score = grid_search.best_score_
create a new random forest classifier object with the best parameters
rfc_best = RandomForestClassifier(**best_params)
fit the new random forest classifier on the training data
rfc_best.fit(X_train_cudf, Y_train_cudf)
use the new random forest classifier to make predictions on the test data
Y_pred_cudf = rfc_best.predict(X_test_cudf)
evaluate the performance of the model using accuracy score
accuracy = accuracy_score(Y_test_cudf, Y_pred_cudf)
print the best parameters, best score, and accuracy score
print("Best parameters:", best_params)
print("Best score:", best_score)
print("Accuracy score:", accuracy)
end_time = time.time()
elapsed_time = end_time - start_time
elapsed_time_minutes = elapsed_time / 60
print("\nElapsed time:", elapsed_time_minutes, "minutes")
But has gotten the issue:
TypeError: Implicit conversion to a host NumPy array via array is not allowed, To explicitly construct a GPU matrix, consider using .to_cupy()
To explicitly construct a host matrix, consider using .to_numpy().
Really in need of you guys help on this
Problem with Import on Colab: KeyError: 'pyarrow'
System Information
- Colab
- Example notebook from [https://rapids.ai/start.html]
- I can verify in the Colab notebook that I've been allocated Tesla T4 GPU
Description of the probelm
When I run the second cell in the notebook (to build the environment/install rapids), I get the following error
---------------------------------------------------------------------------
KeyError Traceback (most recent call last)
<ipython-input-2-bdfa5194a5f0> in <module>()
8 sys.path = sys.path[:dist_package_index] + ['/usr/local/lib/python3.6/site-packages'] + sys.path[dist_package_index:]
9 sys.path
---> 10 exec(open('rapidsai-csp-utils/colab/update_modules.py').read(), globals())
<string> in <module>()
KeyError: 'pyarrow'
I've tried to !pip install pyarrow and rerun the rapids import cell but I still get 'pyarrow' error.
I've attached my full output below:
Cloning into 'rapidsai-csp-utils'...
remote: Enumerating objects: 165, done.
remote: Counting objects: 100% (165/165), done.
remote: Compressing objects: 100% (160/160), done.
remote: Total 165 (delta 60), reused 20 (delta 4), pack-reused 0
Receiving objects: 100% (165/165), 48.48 KiB | 8.08 MiB/s, done.
Resolving deltas: 100% (60/60), done.
PLEASE READ
********************************************************************************************************
Changes:
1. Default stable version is now 0.14. Nightly is now 0.15. We have fixed the long conda install. Hooray!
2. You can now declare your RAPIDSAI version as a CLI option and skip the user prompts (ex: '0.14' or '0.15', between 0.13 to 0.15, without the quotes):
"!bash rapidsai-csp-utils/colab/rapids-colab.sh <version/label>"
Examples: '!bash rapidsai-csp-utils/colab/rapids-colab.sh 0.14', or '!bash rapidsai-csp-utils/colab/rapids-colab.sh stable', or '!bash rapidsai-csp-utils/colab/rapids-colab.sh s'
'!bash rapidsai-csp-utils/colab/rapids-colab.sh 0.15, or '!bash rapidsai-csp-utils/colab/rapids-colab.sh nightly', or '!bash rapidsai-csp-utils/colab/rapids-colab.sh n'
Enjoy using RAPIDS! If you have any issues with or suggestions for RAPIDSAI on Colab, please create a bug request on https://github.com/rapidsai/rapidsai-csp-utils/issues/new. Thanks!
Starting to prep Colab for install RAPIDS Version 0.14 stable
Checking for GPU type:
***********************************************************************
Woo! Your instance has the right kind of GPU, a 'Tesla T4'!
***********************************************************************
Removing conflicting packages, will replace with RAPIDS compatible versions
Uninstalling xgboost-0.90:
Successfully uninstalled xgboost-0.90
Uninstalling dask-2.12.0:
Successfully uninstalled dask-2.12.0
Uninstalling distributed-1.25.3:
Successfully uninstalled distributed-1.25.3
Installing conda
--2020-08-07 01:29:03-- https://repo.continuum.io/miniconda/Miniconda3-4.5.4-Linux-x86_64.sh
Resolving repo.continuum.io (repo.continuum.io)... 104.18.201.79, 104.18.200.79, 2606:4700::6812:c84f, ...
Connecting to repo.continuum.io (repo.continuum.io)|104.18.201.79|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://repo.anaconda.com/miniconda/Miniconda3-4.5.4-Linux-x86_64.sh [following]
--2020-08-07 01:29:03-- https://repo.anaconda.com/miniconda/Miniconda3-4.5.4-Linux-x86_64.sh
Resolving repo.anaconda.com (repo.anaconda.com)... 104.16.130.3, 104.16.131.3, 2606:4700::6810:8203, ...
Connecting to repo.anaconda.com (repo.anaconda.com)|104.16.130.3|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 58468498 (56M) [application/x-sh]
Saving to: ‘Miniconda3-4.5.4-Linux-x86_64.sh’
Miniconda3-4.5.4-Li 100%[===================>] 55.76M 253MB/s in 0.2s
2020-08-07 01:29:03 (253 MB/s) - ‘Miniconda3-4.5.4-Linux-x86_64.sh’ saved [58468498/58468498]
PREFIX=/usr/local
installing: python-3.6.5-hc3d631a_2 ...
Python 3.6.5 :: Anaconda, Inc.
installing: ca-certificates-2018.03.07-0 ...
installing: conda-env-2.6.0-h36134e3_1 ...
installing: libgcc-ng-7.2.0-hdf63c60_3 ...
installing: libstdcxx-ng-7.2.0-hdf63c60_3 ...
installing: libffi-3.2.1-hd88cf55_4 ...
installing: ncurses-6.1-hf484d3e_0 ...
installing: openssl-1.0.2o-h20670df_0 ...
installing: tk-8.6.7-hc745277_3 ...
installing: xz-5.2.4-h14c3975_4 ...
installing: yaml-0.1.7-had09818_2 ...
installing: zlib-1.2.11-ha838bed_2 ...
installing: libedit-3.1.20170329-h6b74fdf_2 ...
installing: readline-7.0-ha6073c6_4 ...
installing: sqlite-3.23.1-he433501_0 ...
installing: asn1crypto-0.24.0-py36_0 ...
installing: certifi-2018.4.16-py36_0 ...
installing: chardet-3.0.4-py36h0f667ec_1 ...
installing: idna-2.6-py36h82fb2a8_1 ...
installing: pycosat-0.6.3-py36h0a5515d_0 ...
installing: pycparser-2.18-py36hf9f622e_1 ...
installing: pysocks-1.6.8-py36_0 ...
installing: ruamel_yaml-0.15.37-py36h14c3975_2 ...
installing: six-1.11.0-py36h372c433_1 ...
installing: cffi-1.11.5-py36h9745a5d_0 ...
installing: setuptools-39.2.0-py36_0 ...
installing: cryptography-2.2.2-py36h14c3975_0 ...
installing: wheel-0.31.1-py36_0 ...
installing: pip-10.0.1-py36_0 ...
installing: pyopenssl-18.0.0-py36_0 ...
installing: urllib3-1.22-py36hbe7ace6_0 ...
installing: requests-2.18.4-py36he2e5f8d_1 ...
installing: conda-4.5.4-py36_0 ...
installation finished.
WARNING:
You currently have a PYTHONPATH environment variable set. This may cause
unexpected behavior when running the Python interpreter in Miniconda3.
For best results, please verify that your PYTHONPATH only points to
directories of packages that are compatible with the Python interpreter
in Miniconda3: /usr/local
Solving environment: done
## Package Plan ##
environment location: /usr/local
added / updated specs:
- conda
- python=3.6
The following packages will be downloaded:
package | build
---------------------------|-----------------
libgcc-ng-9.1.0 | hdf63c60_0 8.1 MB
tqdm-4.47.0 | py_0 62 KB
openssl-1.1.1g | h7b6447c_0 3.8 MB
pycparser-2.20 | py_2 94 KB
libffi-3.3 | he6710b0_2 54 KB
six-1.15.0 | py_0 13 KB
libedit-3.1.20191231 | h14c3975_1 121 KB
ld_impl_linux-64-2.33.1 | h53a641e_7 645 KB
requests-2.24.0 | py_0 54 KB
cryptography-2.9.2 | py36h1ba5d50_0 626 KB
wheel-0.34.2 | py36_0 49 KB
ncurses-6.2 | he6710b0_1 1.1 MB
cffi-1.14.0 | py36he30daa8_1 226 KB
readline-8.0 | h7b6447c_0 428 KB
pycosat-0.6.3 | py36h7b6447c_0 107 KB
tk-8.6.10 | hbc83047_0 3.2 MB
pyopenssl-19.1.0 | py_1 47 KB
sqlite-3.32.3 | h62c20be_0 2.0 MB
brotlipy-0.7.0 |py36h7b6447c_1000 348 KB
_libgcc_mutex-0.1 | main 3 KB
urllib3-1.25.9 | py_0 98 KB
certifi-2020.6.20 | py36_0 160 KB
python-3.6.10 | h7579374_2 33.9 MB
ca-certificates-2020.6.24 | 0 133 KB
pip-20.1.1 | py36_1 2.0 MB
yaml-0.2.5 | h7b6447c_0 87 KB
ruamel_yaml-0.15.87 | py36h7b6447c_1 256 KB
conda-4.8.3 | py36_0 3.0 MB
libstdcxx-ng-9.1.0 | hdf63c60_0 4.0 MB
pysocks-1.7.1 | py36_0 30 KB
conda-package-handling-1.6.1| py36h7b6447c_0 886 KB
setuptools-49.2.0 | py36_0 929 KB
idna-2.10 | py_0 56 KB
chardet-3.0.4 | py36_1003 197 KB
xz-5.2.5 | h7b6447c_0 438 KB
zlib-1.2.11 | h7b6447c_3 120 KB
------------------------------------------------------------
Total: 67.4 MB
The following NEW packages will be INSTALLED:
_libgcc_mutex: 0.1-main
brotlipy: 0.7.0-py36h7b6447c_1000
conda-package-handling: 1.6.1-py36h7b6447c_0
ld_impl_linux-64: 2.33.1-h53a641e_7
tqdm: 4.47.0-py_0
The following packages will be UPDATED:
ca-certificates: 2018.03.07-0 --> 2020.6.24-0
certifi: 2018.4.16-py36_0 --> 2020.6.20-py36_0
cffi: 1.11.5-py36h9745a5d_0 --> 1.14.0-py36he30daa8_1
chardet: 3.0.4-py36h0f667ec_1 --> 3.0.4-py36_1003
conda: 4.5.4-py36_0 --> 4.8.3-py36_0
cryptography: 2.2.2-py36h14c3975_0 --> 2.9.2-py36h1ba5d50_0
idna: 2.6-py36h82fb2a8_1 --> 2.10-py_0
libedit: 3.1.20170329-h6b74fdf_2 --> 3.1.20191231-h14c3975_1
libffi: 3.2.1-hd88cf55_4 --> 3.3-he6710b0_2
libgcc-ng: 7.2.0-hdf63c60_3 --> 9.1.0-hdf63c60_0
libstdcxx-ng: 7.2.0-hdf63c60_3 --> 9.1.0-hdf63c60_0
ncurses: 6.1-hf484d3e_0 --> 6.2-he6710b0_1
openssl: 1.0.2o-h20670df_0 --> 1.1.1g-h7b6447c_0
pip: 10.0.1-py36_0 --> 20.1.1-py36_1
pycosat: 0.6.3-py36h0a5515d_0 --> 0.6.3-py36h7b6447c_0
pycparser: 2.18-py36hf9f622e_1 --> 2.20-py_2
pyopenssl: 18.0.0-py36_0 --> 19.1.0-py_1
pysocks: 1.6.8-py36_0 --> 1.7.1-py36_0
python: 3.6.5-hc3d631a_2 --> 3.6.10-h7579374_2
readline: 7.0-ha6073c6_4 --> 8.0-h7b6447c_0
requests: 2.18.4-py36he2e5f8d_1 --> 2.24.0-py_0
ruamel_yaml: 0.15.37-py36h14c3975_2 --> 0.15.87-py36h7b6447c_1
setuptools: 39.2.0-py36_0 --> 49.2.0-py36_0
six: 1.11.0-py36h372c433_1 --> 1.15.0-py_0
sqlite: 3.23.1-he433501_0 --> 3.32.3-h62c20be_0
tk: 8.6.7-hc745277_3 --> 8.6.10-hbc83047_0
urllib3: 1.22-py36hbe7ace6_0 --> 1.25.9-py_0
wheel: 0.31.1-py36_0 --> 0.34.2-py36_0
xz: 5.2.4-h14c3975_4 --> 5.2.5-h7b6447c_0
yaml: 0.1.7-had09818_2 --> 0.2.5-h7b6447c_0
zlib: 1.2.11-ha838bed_2 --> 1.2.11-h7b6447c_3
Downloading and Extracting Packages
libgcc-ng-9.1.0 | 8.1 MB | : 100% 1.0/1 [00:01<00:00, 1.16s/it]
tqdm-4.47.0 | 62 KB | : 100% 1.0/1 [00:00<00:00, 20.77it/s]
openssl-1.1.1g | 3.8 MB | : 100% 1.0/1 [00:00<00:00, 1.62it/s]
pycparser-2.20 | 94 KB | : 100% 1.0/1 [00:00<00:00, 14.21it/s]
libffi-3.3 | 54 KB | : 100% 1.0/1 [00:00<00:00, 30.17it/s]
six-1.15.0 | 13 KB | : 100% 1.0/1 [00:00<00:00, 22.93it/s]
libedit-3.1.20191231 | 121 KB | : 100% 1.0/1 [00:00<00:00, 21.43it/s]
ld_impl_linux-64-2.3 | 645 KB | : 100% 1.0/1 [00:00<00:00, 7.02it/s]
requests-2.24.0 | 54 KB | : 100% 1.0/1 [00:00<00:00, 25.12it/s]
cryptography-2.9.2 | 626 KB | : 100% 1.0/1 [00:00<00:00, 4.74it/s]
wheel-0.34.2 | 49 KB | : 100% 1.0/1 [00:00<00:00, 20.14it/s]
ncurses-6.2 | 1.1 MB | : 100% 1.0/1 [00:00<00:00, 1.39it/s]
cffi-1.14.0 | 226 KB | : 100% 1.0/1 [00:00<00:00, 13.55it/s]
readline-8.0 | 428 KB | : 100% 1.0/1 [00:00<00:00, 8.31it/s]
pycosat-0.6.3 | 107 KB | : 100% 1.0/1 [00:00<00:00, 18.34it/s]
tk-8.6.10 | 3.2 MB | : 100% 1.0/1 [00:00<00:00, 1.61it/s]
pyopenssl-19.1.0 | 47 KB | : 100% 1.0/1 [00:00<00:00, 26.55it/s]
sqlite-3.32.3 | 2.0 MB | : 100% 1.0/1 [00:00<00:00, 3.25it/s]
brotlipy-0.7.0 | 348 KB | : 100% 1.0/1 [00:00<00:00, 13.06it/s]
_libgcc_mutex-0.1 | 3 KB | : 100% 1.0/1 [00:00<00:00, 32.78it/s]
urllib3-1.25.9 | 98 KB | : 100% 1.0/1 [00:00<00:00, 19.16it/s]
certifi-2020.6.20 | 160 KB | : 100% 1.0/1 [00:00<00:00, 19.72it/s]
python-3.6.10 | 33.9 MB | : 100% 1.0/1 [00:04<00:00, 4.64s/it]
ca-certificates-2020 | 133 KB | : 100% 1.0/1 [00:00<00:00, 26.34it/s]
pip-20.1.1 | 2.0 MB | : 100% 1.0/1 [00:00<00:00, 1.63it/s]
yaml-0.2.5 | 87 KB | : 100% 1.0/1 [00:00<00:00, 17.13it/s]
ruamel_yaml-0.15.87 | 256 KB | : 100% 1.0/1 [00:00<00:00, 9.41it/s]
conda-4.8.3 | 3.0 MB | : 100% 1.0/1 [00:00<00:00, 1.43it/s]
libstdcxx-ng-9.1.0 | 4.0 MB | : 100% 1.0/1 [00:00<00:00, 1.68it/s]
pysocks-1.7.1 | 30 KB | : 100% 1.0/1 [00:00<00:00, 33.42it/s]
conda-package-handli | 886 KB | : 100% 1.0/1 [00:00<00:00, 6.46it/s]
setuptools-49.2.0 | 929 KB | : 100% 1.0/1 [00:00<00:00, 3.57it/s]
idna-2.10 | 56 KB | : 100% 1.0/1 [00:00<00:00, 29.42it/s]
chardet-3.0.4 | 197 KB | : 100% 1.0/1 [00:00<00:00, 12.15it/s]
xz-5.2.5 | 438 KB | : 100% 1.0/1 [00:00<00:00, 8.57it/s]
zlib-1.2.11 | 120 KB | : 100% 1.0/1 [00:00<00:00, 22.62it/s]
Preparing transaction: done
Verifying transaction: done
Executing transaction: done
Collecting package metadata (current_repodata.json): done
Solving environment: done
## Package Plan ##
environment location: /usr/local
The following packages will be downloaded:
package | build
---------------------------|-----------------
_libgcc_mutex-0.1 | conda_forge 3 KB conda-forge
_openmp_mutex-4.5 | 1_gnu 22 KB conda-forge
brotlipy-0.7.0 |py36h8c4c3a4_1000 346 KB conda-forge
ca-certificates-2020.6.20 | hecda079_0 145 KB conda-forge
certifi-2020.6.20 | py36h9f0ad1d_0 151 KB conda-forge
cffi-1.11.5 | py36_0 406 KB conda-forge
chardet-3.0.4 |py36h9f0ad1d_1006 188 KB conda-forge
conda-4.8.3 | py36h9f0ad1d_1 3.0 MB conda-forge
conda-package-handling-1.6.0| py36h8c4c3a4_2 947 KB conda-forge
cryptography-3.0 | py36h45558ae_0 640 KB conda-forge
idna-2.10 | pyh9f0ad1d_0 52 KB conda-forge
ld_impl_linux-64-2.34 | hc38a660_9 612 KB conda-forge
libgcc-ng-9.3.0 | h24d8f2e_14 7.8 MB conda-forge
libgomp-9.3.0 | h24d8f2e_14 374 KB conda-forge
libstdcxx-ng-9.3.0 | hdf63c60_14 4.0 MB conda-forge
ncurses-6.2 | he1b5a44_1 993 KB conda-forge
openssl-1.1.1g | h516909a_1 2.1 MB conda-forge
pip-20.2.1 | py_0 1.1 MB conda-forge
pycosat-0.6.3 |py36h8c4c3a4_1004 107 KB conda-forge
pycparser-2.20 | pyh9f0ad1d_2 94 KB conda-forge
pyopenssl-19.1.0 | py_1 47 KB conda-forge
pysocks-1.7.1 | py36h9f0ad1d_1 27 KB conda-forge
python_abi-3.6 | 1_cp36m 4 KB conda-forge
readline-8.0 | he28a2e2_2 281 KB conda-forge
requests-2.24.0 | pyh9f0ad1d_0 47 KB conda-forge
ruamel_yaml-0.15.80 |py36h8c4c3a4_1001 270 KB conda-forge
setuptools-49.2.1 | py36h9f0ad1d_0 943 KB conda-forge
six-1.15.0 | pyh9f0ad1d_0 14 KB conda-forge
sqlite-3.32.3 | hcee41ef_1 1.4 MB conda-forge
tk-8.6.10 | hed695b0_0 3.2 MB conda-forge
tqdm-4.48.2 | pyh9f0ad1d_0 53 KB conda-forge
urllib3-1.25.10 | py_0 92 KB conda-forge
wheel-0.34.2 | py_1 24 KB conda-forge
xz-5.2.5 | h516909a_1 343 KB conda-forge
yaml-0.2.5 | h516909a_0 82 KB conda-forge
zlib-1.2.11 | h516909a_1006 105 KB conda-forge
------------------------------------------------------------
Total: 29.8 MB
The following NEW packages will be INSTALLED:
_openmp_mutex conda-forge/linux-64::_openmp_mutex-4.5-1_gnu
libgomp conda-forge/linux-64::libgomp-9.3.0-h24d8f2e_14
python_abi conda-forge/linux-64::python_abi-3.6-1_cp36m
The following packages will be REMOVED:
asn1crypto-0.24.0-py36_0
conda-env-2.6.0-h36134e3_1
libedit-3.1.20191231-h14c3975_1
The following packages will be UPDATED:
chardet pkgs/main::chardet-3.0.4-py36_1003 --> conda-forge::chardet-3.0.4-py36h9f0ad1d_1006
conda pkgs/main::conda-4.8.3-py36_0 --> conda-forge::conda-4.8.3-py36h9f0ad1d_1
cryptography pkgs/main::cryptography-2.9.2-py36h1b~ --> conda-forge::cryptography-3.0-py36h45558ae_0
ld_impl_linux-64 pkgs/main::ld_impl_linux-64-2.33.1-h5~ --> conda-forge::ld_impl_linux-64-2.34-hc38a660_9
libgcc-ng pkgs/main::libgcc-ng-9.1.0-hdf63c60_0 --> conda-forge::libgcc-ng-9.3.0-h24d8f2e_14
libstdcxx-ng pkgs/main::libstdcxx-ng-9.1.0-hdf63c6~ --> conda-forge::libstdcxx-ng-9.3.0-hdf63c60_14
openssl pkgs/main::openssl-1.1.1g-h7b6447c_0 --> conda-forge::openssl-1.1.1g-h516909a_1
pip pkgs/main/linux-64::pip-20.1.1-py36_1 --> conda-forge/noarch::pip-20.2.1-py_0
pycosat pkgs/main::pycosat-0.6.3-py36h7b6447c~ --> conda-forge::pycosat-0.6.3-py36h8c4c3a4_1004
pysocks pkgs/main::pysocks-1.7.1-py36_0 --> conda-forge::pysocks-1.7.1-py36h9f0ad1d_1
readline pkgs/main::readline-8.0-h7b6447c_0 --> conda-forge::readline-8.0-he28a2e2_2
setuptools pkgs/main::setuptools-49.2.0-py36_0 --> conda-forge::setuptools-49.2.1-py36h9f0ad1d_0
sqlite pkgs/main::sqlite-3.32.3-h62c20be_0 --> conda-forge::sqlite-3.32.3-hcee41ef_1
tqdm pkgs/main::tqdm-4.47.0-py_0 --> conda-forge::tqdm-4.48.2-pyh9f0ad1d_0
urllib3 pkgs/main::urllib3-1.25.9-py_0 --> conda-forge::urllib3-1.25.10-py_0
wheel pkgs/main/linux-64::wheel-0.34.2-py36~ --> conda-forge/noarch::wheel-0.34.2-py_1
xz pkgs/main::xz-5.2.5-h7b6447c_0 --> conda-forge::xz-5.2.5-h516909a_1
zlib pkgs/main::zlib-1.2.11-h7b6447c_3 --> conda-forge::zlib-1.2.11-h516909a_1006
The following packages will be SUPERSEDED by a higher-priority channel:
_libgcc_mutex pkgs/main::_libgcc_mutex-0.1-main --> conda-forge::_libgcc_mutex-0.1-conda_forge
brotlipy pkgs/main::brotlipy-0.7.0-py36h7b6447~ --> conda-forge::brotlipy-0.7.0-py36h8c4c3a4_1000
ca-certificates pkgs/main::ca-certificates-2020.6.24-0 --> conda-forge::ca-certificates-2020.6.20-hecda079_0
certifi pkgs/main::certifi-2020.6.20-py36_0 --> conda-forge::certifi-2020.6.20-py36h9f0ad1d_0
cffi pkgs/main::cffi-1.14.0-py36he30daa8_1 --> conda-forge::cffi-1.11.5-py36_0
conda-package-han~ pkgs/main::conda-package-handling-1.6~ --> conda-forge::conda-package-handling-1.6.0-py36h8c4c3a4_2
idna pkgs/main::idna-2.10-py_0 --> conda-forge::idna-2.10-pyh9f0ad1d_0
ncurses pkgs/main::ncurses-6.2-he6710b0_1 --> conda-forge::ncurses-6.2-he1b5a44_1
pycparser pkgs/main::pycparser-2.20-py_2 --> conda-forge::pycparser-2.20-pyh9f0ad1d_2
pyopenssl pkgs/main --> conda-forge
requests pkgs/main::requests-2.24.0-py_0 --> conda-forge::requests-2.24.0-pyh9f0ad1d_0
ruamel_yaml pkgs/main::ruamel_yaml-0.15.87-py36h7~ --> conda-forge::ruamel_yaml-0.15.80-py36h8c4c3a4_1001
six pkgs/main::six-1.15.0-py_0 --> conda-forge::six-1.15.0-pyh9f0ad1d_0
tk pkgs/main::tk-8.6.10-hbc83047_0 --> conda-forge::tk-8.6.10-hed695b0_0
yaml pkgs/main::yaml-0.2.5-h7b6447c_0 --> conda-forge::yaml-0.2.5-h516909a_0
Downloading and Extracting Packages
requests-2.24.0 | 47 KB | : 100% 1.0/1 [00:00<00:00, 7.92it/s]
yaml-0.2.5 | 82 KB | : 100% 1.0/1 [00:00<00:00, 14.03it/s]
conda-package-handli | 947 KB | : 100% 1.0/1 [00:00<00:00, 6.19it/s]
_libgcc_mutex-0.1 | 3 KB | : 100% 1.0/1 [00:00<00:00, 29.64it/s]
ruamel_yaml-0.15.80 | 270 KB | : 100% 1.0/1 [00:00<00:00, 10.94it/s]
sqlite-3.32.3 | 1.4 MB | : 100% 1.0/1 [00:00<00:00, 4.47it/s]
ncurses-6.2 | 993 KB | : 100% 1.0/1 [00:00<00:00, 2.87it/s]
xz-5.2.5 | 343 KB | : 100% 1.0/1 [00:00<00:00, 10.14it/s]
python_abi-3.6 | 4 KB | : 100% 1.0/1 [00:00<00:00, 26.60it/s]
zlib-1.2.11 | 105 KB | : 100% 1.0/1 [00:00<00:00, 22.01it/s]
cffi-1.11.5 | 406 KB | : 100% 1.0/1 [00:00<00:00, 11.21it/s]
pycparser-2.20 | 94 KB | : 100% 1.0/1 [00:00<00:00, 20.10it/s]
ca-certificates-2020 | 145 KB | : 100% 1.0/1 [00:00<00:00, 19.12it/s]
pysocks-1.7.1 | 27 KB | : 100% 1.0/1 [00:00<00:00, 32.51it/s]
pip-20.2.1 | 1.1 MB | : 100% 1.0/1 [00:00<00:00, 4.21it/s]
openssl-1.1.1g | 2.1 MB | : 100% 1.0/1 [00:00<00:00, 3.18it/s]
libstdcxx-ng-9.3.0 | 4.0 MB | : 100% 1.0/1 [00:00<00:00, 1.67it/s]
wheel-0.34.2 | 24 KB | : 100% 1.0/1 [00:00<00:00, 26.70it/s]
idna-2.10 | 52 KB | : 100% 1.0/1 [00:00<00:00, 25.45it/s]
certifi-2020.6.20 | 151 KB | : 100% 1.0/1 [00:00<00:00, 19.07it/s]
tk-8.6.10 | 3.2 MB | : 100% 1.0/1 [00:00<00:00, 1.82it/s]
setuptools-49.2.1 | 943 KB | : 100% 1.0/1 [00:00<00:00, 4.85it/s]
_openmp_mutex-4.5 | 22 KB | : 100% 1.0/1 [00:00<00:00, 32.53it/s]
six-1.15.0 | 14 KB | : 100% 1.0/1 [00:00<00:00, 21.71it/s]
tqdm-4.48.2 | 53 KB | : 100% 1.0/1 [00:00<00:00, 25.44it/s]
conda-4.8.3 | 3.0 MB | : 100% 1.0/1 [00:00<00:00, 1.87it/s]
pyopenssl-19.1.0 | 47 KB | : 100% 1.0/1 [00:00<00:00, 17.13it/s]
chardet-3.0.4 | 188 KB | : 100% 1.0/1 [00:00<00:00, 12.57it/s]
urllib3-1.25.10 | 92 KB | : 100% 1.0/1 [00:00<00:00, 18.32it/s]
brotlipy-0.7.0 | 346 KB | : 100% 1.0/1 [00:00<00:00, 11.08it/s]
libgomp-9.3.0 | 374 KB | : 100% 1.0/1 [00:00<00:00, 12.80it/s]
readline-8.0 | 281 KB | : 100% 1.0/1 [00:00<00:00, 12.53it/s]
cryptography-3.0 | 640 KB | : 100% 1.0/1 [00:00<00:00, 6.15it/s]
pycosat-0.6.3 | 107 KB | : 100% 1.0/1 [00:00<00:00, 15.25it/s]
libgcc-ng-9.3.0 | 7.8 MB | : 100% 1.0/1 [00:01<00:00, 1.07s/it]
ld_impl_linux-64-2.3 | 612 KB | : 100% 1.0/1 [00:00<00:00, 7.66it/s]
Preparing transaction: done
Verifying transaction: done
Executing transaction: done
Collecting package metadata (current_repodata.json): done
Solving environment: done
# All requested packages already installed.
Installing RAPIDS 0.14 packages from the stable release channel
Please standby, this will take a few minutes...
Collecting package metadata (current_repodata.json): done
Solving environment: failed with initial frozen solve. Retrying with flexible solve.
Solving environment: failed with repodata from current_repodata.json, will retry with next repodata source.
Collecting package metadata (repodata.json): done
Solving environment: done
## Package Plan ##
environment location: /usr/local
added / updated specs:
- cudatoolkit=10.1
- cudf=0.14
- cugraph
- cuml
- cusignal
- cuspatial
- dask-cudf
- gcsfs
- pynvml
- python=3.6
- xgboost=1.1.0dev.rapidsai0.14
The following packages will be downloaded:
package | build
---------------------------|-----------------
arrow-cpp-0.15.0 | py36h090bef1_2 18.1 MB conda-forge
blinker-1.4 | py_1 13 KB conda-forge
bokeh-2.1.1 | py36h9f0ad1d_0 6.9 MB conda-forge
boost-1.70.0 | py36h9de70de_1 337 KB conda-forge
boost-cpp-1.70.0 | h8e57a91_2 21.1 MB conda-forge
brotli-1.0.7 | he1b5a44_1004 386 KB conda-forge
bzip2-1.0.8 | h516909a_2 396 KB conda-forge
c-ares-1.16.1 | h516909a_0 108 KB conda-forge
cachetools-4.1.1 | py_0 12 KB conda-forge
cairo-1.16.0 | hcf35c78_1003 1.5 MB conda-forge
cfitsio-3.470 | hce51eda_6 1.3 MB conda-forge
click-7.1.2 | pyh9f0ad1d_0 64 KB conda-forge
cloudpickle-1.5.0 | py_0 22 KB conda-forge
contextvars-2.4 | py_0 11 KB conda-forge
cudatoolkit-10.1.243 | h6bb024c_0 513.2 MB nvidia
cudf-0.14.0 | py36_0 25.7 MB rapidsai/label/main
cudnn-7.6.0 | cuda10.1_0 240.9 MB nvidia
cugraph-0.14.0 | py36_0 6.9 MB rapidsai/label/main
cuml-0.14.0 | cuda10.1_py36_0 9.6 MB rapidsai/label/main
cupy-7.7.0 | py36h5c369b2_0 20.5 MB conda-forge
curl-7.71.1 | he644dc0_4 139 KB conda-forge
cusignal-0.14.1 | py36_0 87 KB rapidsai/label/main
cuspatial-0.14.0 | py36_0 3.6 MB rapidsai/label/main
cytoolz-0.10.1 | py36h516909a_0 431 KB conda-forge
dask-2.22.0 | py_0 4 KB conda-forge
dask-core-2.22.0 | py_0 624 KB conda-forge
dask-cudf-0.14.0 | py36_0 81 KB rapidsai/label/main
decorator-4.4.2 | py_0 11 KB conda-forge
distributed-2.22.0 | py36h9f0ad1d_0 1.0 MB conda-forge
dlpack-0.3 | he1b5a44_1 13 KB conda-forge
double-conversion-3.1.5 | he1b5a44_2 85 KB conda-forge
expat-2.2.9 | he1b5a44_2 191 KB conda-forge
fastavro-0.24.0 | py36h8c4c3a4_0 390 KB conda-forge
fastrlock-0.5 | py36h831f99a_0 31 KB conda-forge
fontconfig-2.13.1 | h86ecdb6_1001 340 KB conda-forge
freetype-2.10.2 | he06d7ca_0 905 KB conda-forge
freexl-1.0.5 | h516909a_1002 46 KB conda-forge
fsspec-0.8.0 | py_0 61 KB conda-forge
gcsfs-0.6.2 | py_0 19 KB conda-forge
gdal-3.1.0 | py36hd60729c_1 1.3 MB conda-forge
geos-3.8.1 | he1b5a44_0 1.0 MB conda-forge
geotiff-1.6.0 | h05acad5_0 280 KB conda-forge
gflags-2.2.2 | he1b5a44_1004 114 KB conda-forge
giflib-5.2.1 | h516909a_2 80 KB conda-forge
glib-2.65.0 | h3eb4bd4_0 2.9 MB
glog-0.4.0 | h49b9bf7_3 104 KB conda-forge
google-auth-1.20.0 | py_0 56 KB conda-forge
google-auth-oauthlib-0.4.1 | py_2 18 KB conda-forge
grpc-cpp-1.23.0 | h18db393_0 4.5 MB conda-forge
hdf4-4.2.13 | hf30be14_1003 964 KB conda-forge
hdf5-1.10.6 |nompi_h3c11f04_101 3.0 MB conda-forge
heapdict-1.0.1 | py_0 7 KB conda-forge
icu-64.2 | he1b5a44_1 12.6 MB conda-forge
immutables-0.14 | py36h8c4c3a4_0 68 KB conda-forge
jinja2-2.11.2 | pyh9f0ad1d_0 93 KB conda-forge
joblib-0.16.0 | py_0 203 KB conda-forge
jpeg-9d | h516909a_0 266 KB conda-forge
json-c-0.13.1 | hbfbb72e_1002 76 KB conda-forge
kealib-1.4.13 | h33137a7_1 172 KB conda-forge
krb5-1.17.1 | hfafb76e_2 1.5 MB conda-forge
lcms2-2.11 | hbd6801e_0 431 KB conda-forge
libblas-3.8.0 | 17_openblas 11 KB conda-forge
libcblas-3.8.0 | 17_openblas 11 KB conda-forge
libcudf-0.14.0 | cuda10.1_0 101.5 MB rapidsai/label/main
libcugraph-0.14.0 | cuda10.1_0 14.3 MB rapidsai/label/main
libcuml-0.14.0 | cuda10.1_0 42.4 MB rapidsai/label/main
libcumlprims-0.14.1 | cuda10.1_0 6.0 MB nvidia
libcurl-7.71.1 | hcdd3856_4 312 KB conda-forge
libcuspatial-0.14.0 | cuda10.1_0 3.4 MB rapidsai/label/main
libdap4-3.20.6 | h1d1bd15_1 7.9 MB conda-forge
libedit-3.1.20191231 | h46ee950_1 122 KB conda-forge
libev-4.33 | h516909a_0 105 KB conda-forge
libevent-2.1.10 | hcdb4288_1 1.3 MB conda-forge
libgdal-3.1.0 | h2e1b11c_1 24.7 MB conda-forge
libgfortran-ng-7.5.0 | hdf63c60_14 1.3 MB conda-forge
libhwloc-2.1.0 | h3c4fd83_0 2.7 MB conda-forge
libiconv-1.15 | h516909a_1006 2.0 MB conda-forge
libkml-1.3.0 | h4fcabce_1010 643 KB conda-forge
liblapack-3.8.0 | 17_openblas 11 KB conda-forge
libllvm9-9.0.1 | he513fc3_1 25.1 MB conda-forge
libnetcdf-4.7.4 |nompi_h84807e1_105 1.3 MB conda-forge
libnghttp2-1.41.0 | hab1572f_1 709 KB conda-forge
libnvstrings-0.14.0 | cuda10.1_0 30.1 MB rapidsai/label/main
libopenblas-0.3.10 |pthreads_hb3c22a3_4 7.8 MB conda-forge
libpng-1.6.37 | hed695b0_1 308 KB conda-forge
libpq-12.3 | h5513abc_0 2.6 MB conda-forge
libprotobuf-3.8.0 | h8b12597_0 4.7 MB conda-forge
librmm-0.14.0 | cuda10.1_0 189 KB rapidsai/label/main
libspatialite-4.3.0a | h2482549_1038 3.1 MB conda-forge
libssh2-1.9.0 | hab1572f_5 225 KB conda-forge
libtiff-4.1.0 | hc7e4089_6 668 KB conda-forge
libuuid-2.32.1 | h14c3975_1000 26 KB conda-forge
libwebp-base-1.1.0 | h516909a_3 845 KB conda-forge
libxcb-1.13 | h14c3975_1002 396 KB conda-forge
libxgboost-1.1.0dev.rapidsai0.14| cuda10.1_0 31.1 MB rapidsai/label/main
libxml2-2.9.10 | hee79883_0 1.3 MB conda-forge
llvmlite-0.33.0 | py36hfa65bc7_1 329 KB conda-forge
locket-0.2.0 | py_2 6 KB conda-forge
lz4-c-1.8.3 | he1b5a44_1001 187 KB conda-forge
markupsafe-1.1.1 | py36h8c4c3a4_1 26 KB conda-forge
msgpack-python-1.0.0 | py36hdb11119_1 91 KB conda-forge
nccl-2.5.7.1 | h51cf6c1_0 98.4 MB conda-forge
numba-0.50.1 | py36h0573a6f_1 3.1 MB
numpy-1.19.1 | py36h7314795_0 5.2 MB conda-forge
nvstrings-0.14.0 | py36_0 129 KB rapidsai/label/main
oauthlib-3.0.1 | py_0 82 KB conda-forge
olefile-0.46 | py_0 31 KB conda-forge
openjpeg-2.3.1 | h981e76c_3 475 KB conda-forge
packaging-20.4 | pyh9f0ad1d_0 32 KB conda-forge
pandas-0.25.3 | py36hb3f55d8_0 11.4 MB conda-forge
parquet-cpp-1.5.1 | 2 3 KB conda-forge
partd-1.1.0 | py_0 17 KB conda-forge
pcre-8.44 | he1b5a44_0 261 KB conda-forge
pillow-7.2.0 | py36h8328e55_1 670 KB conda-forge
pixman-0.38.0 | h516909a_1003 594 KB conda-forge
poppler-0.88.0 | h4190859_0 13.1 MB conda-forge
poppler-data-0.4.9 | 1 3.4 MB conda-forge
postgresql-12.3 | h8573dbc_0 5.0 MB conda-forge
proj-7.0.0 | h966b41f_5 3.7 MB conda-forge
psutil-5.7.2 | py36h8c4c3a4_0 336 KB conda-forge
pthread-stubs-0.4 | h14c3975_1001 5 KB conda-forge
py-xgboost-1.1.0dev.rapidsai0.14| cuda10.1py36_0 106 KB rapidsai/label/main
pyarrow-0.15.0 | py36h8b68381_1 3.2 MB conda-forge
pyasn1-0.4.8 | py_0 53 KB conda-forge
pyasn1-modules-0.2.7 | py_0 60 KB conda-forge
pyjwt-1.7.1 | py_0 17 KB conda-forge
pynvml-8.0.4 | py_1 31 KB conda-forge
pyparsing-2.4.7 | pyh9f0ad1d_0 60 KB conda-forge
python-dateutil-2.8.1 | py_0 220 KB conda-forge
pytz-2020.1 | pyh9f0ad1d_0 227 KB conda-forge
pyyaml-5.3.1 | py36h8c4c3a4_0 186 KB conda-forge
re2-2020.04.01 | he1b5a44_0 438 KB conda-forge
requests-oauthlib-1.3.0 | pyh9f0ad1d_0 21 KB conda-forge
rmm-0.14.0 | py36_0 684 KB rapidsai/label/main
rsa-4.6 | pyh9f0ad1d_0 27 KB conda-forge
scikit-learn-0.23.2 | py36hfb379a7_0 6.8 MB conda-forge
scipy-1.4.1 | py36h2d22cac_3 18.9 MB conda-forge
snappy-1.1.8 | he1b5a44_3 32 KB conda-forge
sortedcontainers-2.2.2 | pyh9f0ad1d_0 25 KB conda-forge
spdlog-1.7.0 | hc9558a2_2 410 KB conda-forge
tbb-2018.0.5 | h2d50403_0 1.1 MB conda-forge
tblib-1.6.0 | py_0 14 KB conda-forge
threadpoolctl-2.1.0 | pyh5ca1d4c_0 15 KB conda-forge
thrift-cpp-0.12.0 | hf3afdfd_1004 2.4 MB conda-forge
tiledb-1.7.7 | hcde45ca_0 2.0 MB conda-forge
toolz-0.10.0 | py_0 46 KB conda-forge
tornado-6.0.4 | py36h8c4c3a4_1 639 KB conda-forge
typing_extensions-3.7.4.2 | py_0 25 KB conda-forge
tzcode-2020a | h516909a_0 425 KB conda-forge
ucx-1.8.0+gf6ec8d4 | cuda10.1_20 8.9 MB rapidsai/label/main
ucx-py-0.14.0+gf6ec8d4 | py36_0 137 KB rapidsai/label/main
uriparser-0.9.3 | he1b5a44_1 49 KB conda-forge
xerces-c-3.2.2 | h8412b87_1004 1.7 MB conda-forge
xgboost-1.1.0dev.rapidsai0.14| cuda10.1py36_0 12 KB rapidsai/label/main
xorg-kbproto-1.0.7 | h14c3975_1002 26 KB conda-forge
xorg-libice-1.0.10 | h516909a_0 57 KB conda-forge
xorg-libsm-1.2.3 | h84519dc_1000 25 KB conda-forge
xorg-libx11-1.6.11 | h516909a_0 920 KB conda-forge
xorg-libxau-1.0.9 | h14c3975_0 13 KB conda-forge
xorg-libxdmcp-1.1.3 | h516909a_0 18 KB conda-forge
xorg-libxext-1.3.4 | h516909a_0 51 KB conda-forge
xorg-libxrender-0.9.10 | h516909a_1002 31 KB conda-forge
xorg-renderproto-0.11.1 | h14c3975_1002 8 KB conda-forge
xorg-xextproto-7.3.0 | h14c3975_1002 27 KB conda-forge
xorg-xproto-7.0.31 | h14c3975_1007 72 KB conda-forge
zict-2.0.0 | py_0 10 KB conda-forge
zstd-1.4.4 | h3b9ef0a_2 982 KB conda-forge
------------------------------------------------------------
Total: 1.39 GB
The following NEW packages will be INSTALLED:
arrow-cpp conda-forge/linux-64::arrow-cpp-0.15.0-py36h090bef1_2
blinker conda-forge/noarch::blinker-1.4-py_1
bokeh conda-forge/linux-64::bokeh-2.1.1-py36h9f0ad1d_0
boost conda-forge/linux-64::boost-1.70.0-py36h9de70de_1
boost-cpp conda-forge/linux-64::boost-cpp-1.70.0-h8e57a91_2
brotli conda-forge/linux-64::brotli-1.0.7-he1b5a44_1004
bzip2 conda-forge/linux-64::bzip2-1.0.8-h516909a_2
c-ares conda-forge/linux-64::c-ares-1.16.1-h516909a_0
cachetools conda-forge/noarch::cachetools-4.1.1-py_0
cairo conda-forge/linux-64::cairo-1.16.0-hcf35c78_1003
cfitsio conda-forge/linux-64::cfitsio-3.470-hce51eda_6
click conda-forge/noarch::click-7.1.2-pyh9f0ad1d_0
cloudpickle conda-forge/noarch::cloudpickle-1.5.0-py_0
contextvars conda-forge/noarch::contextvars-2.4-py_0
cudatoolkit nvidia/linux-64::cudatoolkit-10.1.243-h6bb024c_0
cudf rapidsai/label/main/linux-64::cudf-0.14.0-py36_0
cudnn nvidia/linux-64::cudnn-7.6.0-cuda10.1_0
cugraph rapidsai/label/main/linux-64::cugraph-0.14.0-py36_0
cuml rapidsai/label/main/linux-64::cuml-0.14.0-cuda10.1_py36_0
cupy conda-forge/linux-64::cupy-7.7.0-py36h5c369b2_0
curl conda-forge/linux-64::curl-7.71.1-he644dc0_4
cusignal rapidsai/label/main/noarch::cusignal-0.14.1-py36_0
cuspatial rapidsai/label/main/linux-64::cuspatial-0.14.0-py36_0
cytoolz conda-forge/linux-64::cytoolz-0.10.1-py36h516909a_0
dask conda-forge/noarch::dask-2.22.0-py_0
dask-core conda-forge/noarch::dask-core-2.22.0-py_0
dask-cudf rapidsai/label/main/linux-64::dask-cudf-0.14.0-py36_0
decorator conda-forge/noarch::decorator-4.4.2-py_0
distributed conda-forge/linux-64::distributed-2.22.0-py36h9f0ad1d_0
dlpack conda-forge/linux-64::dlpack-0.3-he1b5a44_1
double-conversion conda-forge/linux-64::double-conversion-3.1.5-he1b5a44_2
expat conda-forge/linux-64::expat-2.2.9-he1b5a44_2
fastavro conda-forge/linux-64::fastavro-0.24.0-py36h8c4c3a4_0
fastrlock conda-forge/linux-64::fastrlock-0.5-py36h831f99a_0
fontconfig conda-forge/linux-64::fontconfig-2.13.1-h86ecdb6_1001
freetype conda-forge/linux-64::freetype-2.10.2-he06d7ca_0
freexl conda-forge/linux-64::freexl-1.0.5-h516909a_1002
fsspec conda-forge/noarch::fsspec-0.8.0-py_0
gcsfs conda-forge/noarch::gcsfs-0.6.2-py_0
gdal conda-forge/linux-64::gdal-3.1.0-py36hd60729c_1
geos conda-forge/linux-64::geos-3.8.1-he1b5a44_0
geotiff conda-forge/linux-64::geotiff-1.6.0-h05acad5_0
gflags conda-forge/linux-64::gflags-2.2.2-he1b5a44_1004
giflib conda-forge/linux-64::giflib-5.2.1-h516909a_2
glib pkgs/main/linux-64::glib-2.65.0-h3eb4bd4_0
glog conda-forge/linux-64::glog-0.4.0-h49b9bf7_3
google-auth conda-forge/noarch::google-auth-1.20.0-py_0
google-auth-oauth~ conda-forge/noarch::google-auth-oauthlib-0.4.1-py_2
grpc-cpp conda-forge/linux-64::grpc-cpp-1.23.0-h18db393_0
hdf4 conda-forge/linux-64::hdf4-4.2.13-hf30be14_1003
hdf5 conda-forge/linux-64::hdf5-1.10.6-nompi_h3c11f04_101
heapdict conda-forge/noarch::heapdict-1.0.1-py_0
icu conda-forge/linux-64::icu-64.2-he1b5a44_1
immutables conda-forge/linux-64::immutables-0.14-py36h8c4c3a4_0
jinja2 conda-forge/noarch::jinja2-2.11.2-pyh9f0ad1d_0
joblib conda-forge/noarch::joblib-0.16.0-py_0
jpeg conda-forge/linux-64::jpeg-9d-h516909a_0
json-c conda-forge/linux-64::json-c-0.13.1-hbfbb72e_1002
kealib conda-forge/linux-64::kealib-1.4.13-h33137a7_1
krb5 conda-forge/linux-64::krb5-1.17.1-hfafb76e_2
lcms2 conda-forge/linux-64::lcms2-2.11-hbd6801e_0
libblas conda-forge/linux-64::libblas-3.8.0-17_openblas
libcblas conda-forge/linux-64::libcblas-3.8.0-17_openblas
libcudf rapidsai/label/main/linux-64::libcudf-0.14.0-cuda10.1_0
libcugraph rapidsai/label/main/linux-64::libcugraph-0.14.0-cuda10.1_0
libcuml rapidsai/label/main/linux-64::libcuml-0.14.0-cuda10.1_0
libcumlprims nvidia/linux-64::libcumlprims-0.14.1-cuda10.1_0
libcurl conda-forge/linux-64::libcurl-7.71.1-hcdd3856_4
libcuspatial rapidsai/label/main/linux-64::libcuspatial-0.14.0-cuda10.1_0
libdap4 conda-forge/linux-64::libdap4-3.20.6-h1d1bd15_1
libedit conda-forge/linux-64::libedit-3.1.20191231-h46ee950_1
libev conda-forge/linux-64::libev-4.33-h516909a_0
libevent conda-forge/linux-64::libevent-2.1.10-hcdb4288_1
libgdal conda-forge/linux-64::libgdal-3.1.0-h2e1b11c_1
libgfortran-ng conda-forge/linux-64::libgfortran-ng-7.5.0-hdf63c60_14
libhwloc conda-forge/linux-64::libhwloc-2.1.0-h3c4fd83_0
libiconv conda-forge/linux-64::libiconv-1.15-h516909a_1006
libkml conda-forge/linux-64::libkml-1.3.0-h4fcabce_1010
liblapack conda-forge/linux-64::liblapack-3.8.0-17_openblas
libllvm9 conda-forge/linux-64::libllvm9-9.0.1-he513fc3_1
libnetcdf conda-forge/linux-64::libnetcdf-4.7.4-nompi_h84807e1_105
libnghttp2 conda-forge/linux-64::libnghttp2-1.41.0-hab1572f_1
libnvstrings rapidsai/label/main/linux-64::libnvstrings-0.14.0-cuda10.1_0
libopenblas conda-forge/linux-64::libopenblas-0.3.10-pthreads_hb3c22a3_4
libpng conda-forge/linux-64::libpng-1.6.37-hed695b0_1
libpq conda-forge/linux-64::libpq-12.3-h5513abc_0
libprotobuf conda-forge/linux-64::libprotobuf-3.8.0-h8b12597_0
librmm rapidsai/label/main/linux-64::librmm-0.14.0-cuda10.1_0
libspatialite conda-forge/linux-64::libspatialite-4.3.0a-h2482549_1038
libssh2 conda-forge/linux-64::libssh2-1.9.0-hab1572f_5
libtiff conda-forge/linux-64::libtiff-4.1.0-hc7e4089_6
libuuid conda-forge/linux-64::libuuid-2.32.1-h14c3975_1000
libwebp-base conda-forge/linux-64::libwebp-base-1.1.0-h516909a_3
libxcb conda-forge/linux-64::libxcb-1.13-h14c3975_1002
libxgboost rapidsai/label/main/linux-64::libxgboost-1.1.0dev.rapidsai0.14-cuda10.1_0
libxml2 conda-forge/linux-64::libxml2-2.9.10-hee79883_0
llvmlite conda-forge/linux-64::llvmlite-0.33.0-py36hfa65bc7_1
locket conda-forge/noarch::locket-0.2.0-py_2
lz4-c conda-forge/linux-64::lz4-c-1.8.3-he1b5a44_1001
markupsafe conda-forge/linux-64::markupsafe-1.1.1-py36h8c4c3a4_1
msgpack-python conda-forge/linux-64::msgpack-python-1.0.0-py36hdb11119_1
nccl conda-forge/linux-64::nccl-2.5.7.1-h51cf6c1_0
numba pkgs/main/linux-64::numba-0.50.1-py36h0573a6f_1
numpy conda-forge/linux-64::numpy-1.19.1-py36h7314795_0
nvstrings rapidsai/label/main/linux-64::nvstrings-0.14.0-py36_0
oauthlib conda-forge/noarch::oauthlib-3.0.1-py_0
olefile conda-forge/noarch::olefile-0.46-py_0
openjpeg conda-forge/linux-64::openjpeg-2.3.1-h981e76c_3
packaging conda-forge/noarch::packaging-20.4-pyh9f0ad1d_0
pandas conda-forge/linux-64::pandas-0.25.3-py36hb3f55d8_0
parquet-cpp conda-forge/noarch::parquet-cpp-1.5.1-2
partd conda-forge/noarch::partd-1.1.0-py_0
pcre conda-forge/linux-64::pcre-8.44-he1b5a44_0
pillow conda-forge/linux-64::pillow-7.2.0-py36h8328e55_1
pixman conda-forge/linux-64::pixman-0.38.0-h516909a_1003
poppler conda-forge/linux-64::poppler-0.88.0-h4190859_0
poppler-data conda-forge/noarch::poppler-data-0.4.9-1
postgresql conda-forge/linux-64::postgresql-12.3-h8573dbc_0
proj conda-forge/linux-64::proj-7.0.0-h966b41f_5
psutil conda-forge/linux-64::psutil-5.7.2-py36h8c4c3a4_0
pthread-stubs conda-forge/linux-64::pthread-stubs-0.4-h14c3975_1001
py-xgboost rapidsai/label/main/linux-64::py-xgboost-1.1.0dev.rapidsai0.14-cuda10.1py36_0
pyarrow conda-forge/linux-64::pyarrow-0.15.0-py36h8b68381_1
pyasn1 conda-forge/noarch::pyasn1-0.4.8-py_0
pyasn1-modules conda-forge/noarch::pyasn1-modules-0.2.7-py_0
pyjwt conda-forge/noarch::pyjwt-1.7.1-py_0
pynvml conda-forge/noarch::pynvml-8.0.4-py_1
pyparsing conda-forge/noarch::pyparsing-2.4.7-pyh9f0ad1d_0
python-dateutil conda-forge/noarch::python-dateutil-2.8.1-py_0
pytz conda-forge/noarch::pytz-2020.1-pyh9f0ad1d_0
pyyaml conda-forge/linux-64::pyyaml-5.3.1-py36h8c4c3a4_0
re2 conda-forge/linux-64::re2-2020.04.01-he1b5a44_0
requests-oauthlib conda-forge/noarch::requests-oauthlib-1.3.0-pyh9f0ad1d_0
rmm rapidsai/label/main/linux-64::rmm-0.14.0-py36_0
rsa conda-forge/noarch::rsa-4.6-pyh9f0ad1d_0
scikit-learn conda-forge/linux-64::scikit-learn-0.23.2-py36hfb379a7_0
scipy conda-forge/linux-64::scipy-1.4.1-py36h2d22cac_3
snappy conda-forge/linux-64::snappy-1.1.8-he1b5a44_3
sortedcontainers conda-forge/noarch::sortedcontainers-2.2.2-pyh9f0ad1d_0
spdlog conda-forge/linux-64::spdlog-1.7.0-hc9558a2_2
tbb conda-forge/linux-64::tbb-2018.0.5-h2d50403_0
tblib conda-forge/noarch::tblib-1.6.0-py_0
threadpoolctl conda-forge/noarch::threadpoolctl-2.1.0-pyh5ca1d4c_0
thrift-cpp conda-forge/linux-64::thrift-cpp-0.12.0-hf3afdfd_1004
tiledb conda-forge/linux-64::tiledb-1.7.7-hcde45ca_0
toolz conda-forge/noarch::toolz-0.10.0-py_0
tornado conda-forge/linux-64::tornado-6.0.4-py36h8c4c3a4_1
typing_extensions conda-forge/noarch::typing_extensions-3.7.4.2-py_0
tzcode conda-forge/linux-64::tzcode-2020a-h516909a_0
ucx rapidsai/label/main/linux-64::ucx-1.8.0+gf6ec8d4-cuda10.1_20
ucx-py rapidsai/label/main/linux-64::ucx-py-0.14.0+gf6ec8d4-py36_0
uriparser conda-forge/linux-64::uriparser-0.9.3-he1b5a44_1
xerces-c conda-forge/linux-64::xerces-c-3.2.2-h8412b87_1004
xgboost rapidsai/label/main/linux-64::xgboost-1.1.0dev.rapidsai0.14-cuda10.1py36_0
xorg-kbproto conda-forge/linux-64::xorg-kbproto-1.0.7-h14c3975_1002
xorg-libice conda-forge/linux-64::xorg-libice-1.0.10-h516909a_0
xorg-libsm conda-forge/linux-64::xorg-libsm-1.2.3-h84519dc_1000
xorg-libx11 conda-forge/linux-64::xorg-libx11-1.6.11-h516909a_0
xorg-libxau conda-forge/linux-64::xorg-libxau-1.0.9-h14c3975_0
xorg-libxdmcp conda-forge/linux-64::xorg-libxdmcp-1.1.3-h516909a_0
xorg-libxext conda-forge/linux-64::xorg-libxext-1.3.4-h516909a_0
xorg-libxrender conda-forge/linux-64::xorg-libxrender-0.9.10-h516909a_1002
xorg-renderproto conda-forge/linux-64::xorg-renderproto-0.11.1-h14c3975_1002
xorg-xextproto conda-forge/linux-64::xorg-xextproto-7.3.0-h14c3975_1002
xorg-xproto conda-forge/linux-64::xorg-xproto-7.0.31-h14c3975_1007
zict conda-forge/noarch::zict-2.0.0-py_0
zstd conda-forge/linux-64::zstd-1.4.4-h3b9ef0a_2
Downloading and Extracting Packages
fastrlock-0.5 | 31 KB | : 100% 1.0/1 [00:00<00:00, 10.18it/s]
ucx-1.8.0+gf6ec8d4 | 8.9 MB | : 100% 1.0/1 [00:02<00:00, 2.63s/it]
libnghttp2-1.41.0 | 709 KB | : 100% 1.0/1 [00:00<00:00, 6.20it/s]
json-c-0.13.1 | 76 KB | : 100% 1.0/1 [00:00<00:00, 19.57it/s]
glib-2.65.0 | 2.9 MB | : 100% 1.0/1 [00:00<00:00, 3.43it/s]
libcblas-3.8.0 | 11 KB | : 100% 1.0/1 [00:00<00:00, 22.85it/s]
snappy-1.1.8 | 32 KB | : 100% 1.0/1 [00:00<00:00, 24.38it/s]
typing_extensions-3. | 25 KB | : 100% 1.0/1 [00:00<00:00, 21.28it/s]
xorg-libsm-1.2.3 | 25 KB | : 100% 1.0/1 [00:00<00:00, 33.14it/s]
pthread-stubs-0.4 | 5 KB | : 100% 1.0/1 [00:00<00:00, 32.86it/s]
spdlog-1.7.0 | 410 KB | : 100% 1.0/1 [00:00<00:00, 8.88it/s]
tiledb-1.7.7 | 2.0 MB | : 100% 1.0/1 [00:00<00:00, 2.39it/s]
libcurl-7.71.1 | 312 KB | : 100% 1.0/1 [00:00<00:00, 13.26it/s]
libcugraph-0.14.0 | 14.3 MB | : 100% 1.0/1 [00:02<00:00, 204.74s/it]
grpc-cpp-1.23.0 | 4.5 MB | : 100% 1.0/1 [00:00<00:00, 1.20it/s]
pyparsing-2.4.7 | 60 KB | : 100% 1.0/1 [00:00<00:00, 25.66it/s]
google-auth-1.20.0 | 56 KB | : 100% 1.0/1 [00:00<00:00, 23.50it/s]
threadpoolctl-2.1.0 | 15 KB | : 100% 1.0/1 [00:00<00:00, 24.02it/s]
click-7.1.2 | 64 KB | : 100% 1.0/1 [00:00<00:00, 21.25it/s]
libllvm9-9.0.1 | 25.1 MB | : 100% 1.0/1 [00:03<00:00, 3.33s/it]
librmm-0.14.0 | 189 KB | : 100% 1.0/1 [00:01<00:00, 1.06s/it]
cfitsio-3.470 | 1.3 MB | : 100% 1.0/1 [00:00<00:00, 4.33it/s]
libcudf-0.14.0 | 101.5 MB | : 100% 1.0/1 [00:23<00:00, 23.57s/it]
hdf5-1.10.6 | 3.0 MB | : 100% 1.0/1 [00:00<00:00, 2.35it/s]
pixman-0.38.0 | 594 KB | : 100% 1.0/1 [00:00<00:00, 8.72it/s]
markupsafe-1.1.1 | 26 KB | : 100% 1.0/1 [00:00<00:00, 25.77it/s]
xorg-libxext-1.3.4 | 51 KB | : 100% 1.0/1 [00:00<00:00, 25.51it/s]
partd-1.1.0 | 17 KB | : 100% 1.0/1 [00:00<00:00, 27.49it/s]
tblib-1.6.0 | 14 KB | : 100% 1.0/1 [00:00<00:00, 26.96it/s]
dlpack-0.3 | 13 KB | : 100% 1.0/1 [00:00<00:00, 28.96it/s]
libtiff-4.1.0 | 668 KB | : 100% 1.0/1 [00:00<00:00, 7.42it/s]
numba-0.50.1 | 3.1 MB | : 100% 1.0/1 [00:00<00:00, 3.34it/s]
boost-cpp-1.70.0 | 21.1 MB | : 100% 1.0/1 [00:05<00:00, 5.90s/it]
contextvars-2.4 | 11 KB | : 100% 1.0/1 [00:00<00:00, 31.75it/s]
pyasn1-modules-0.2.7 | 60 KB | : 100% 1.0/1 [00:00<00:00, 19.37it/s]
cuspatial-0.14.0 | 3.6 MB | : 100% 1.0/1 [00:01<00:00, 36.04s/it]
cudatoolkit-10.1.243 | 513.2 MB | : 100% 1.0/1 [00:58<00:00, 58.34s/it]
libnetcdf-4.7.4 | 1.3 MB | : 100% 1.0/1 [00:00<00:00, 4.46it/s]
xgboost-1.1.0dev.rap | 12 KB | : 100% 1.0/1 [00:00<00:00, 2.02it/s]
gflags-2.2.2 | 114 KB | : 100% 1.0/1 [00:00<00:00, 18.80it/s]
dask-core-2.22.0 | 624 KB | : 100% 1.0/1 [00:00<00:00, 6.34it/s]
nvstrings-0.14.0 | 129 KB | : 100% 1.0/1 [00:00<00:00, 1.31it/s]
libiconv-1.15 | 2.0 MB | : 100% 1.0/1 [00:00<00:00, 4.10it/s]
postgresql-12.3 | 5.0 MB | : 100% 1.0/1 [00:00<00:00, 1.30it/s]
cudnn-7.6.0 | 240.9 MB | : 100% 1.0/1 [00:27<00:00, 27.35s/it]
boost-1.70.0 | 337 KB | : 100% 1.0/1 [00:00<00:00, 8.60it/s]
curl-7.71.1 | 139 KB | : 100% 1.0/1 [00:00<00:00, 19.50it/s]
olefile-0.46 | 31 KB | : 100% 1.0/1 [00:00<00:00, 18.95it/s]
py-xgboost-1.1.0dev. | 106 KB | : 100% 1.0/1 [00:00<00:00, 1.43it/s]
zict-2.0.0 | 10 KB | : 100% 1.0/1 [00:00<00:00, 29.44it/s]
locket-0.2.0 | 6 KB | : 100% 1.0/1 [00:00<00:00, 29.70it/s]
pillow-7.2.0 | 670 KB | : 100% 1.0/1 [00:00<00:00, 7.28it/s]
xorg-libxdmcp-1.1.3 | 18 KB | : 100% 1.0/1 [00:00<00:00, 31.03it/s]
cachetools-4.1.1 | 12 KB | : 100% 1.0/1 [00:00<00:00, 25.92it/s]
gdal-3.1.0 | 1.3 MB | : 100% 1.0/1 [00:00<00:00, 4.12it/s]
xorg-libice-1.0.10 | 57 KB | : 100% 1.0/1 [00:00<00:00, 23.15it/s]
lcms2-2.11 | 431 KB | : 100% 1.0/1 [00:00<00:00, 11.01it/s]
libcuspatial-0.14.0 | 3.4 MB | : 100% 1.0/1 [00:01<00:00, 22.28s/it]
xerces-c-3.2.2 | 1.7 MB | : 100% 1.0/1 [00:00<00:00, 2.62it/s]
libpq-12.3 | 2.6 MB | : 100% 1.0/1 [00:00<00:00, 2.10it/s]
geotiff-1.6.0 | 280 KB | : 100% 1.0/1 [00:00<00:00, 13.73it/s]
nccl-2.5.7.1 | 98.4 MB | : 100% 1.0/1 [00:11<00:00, 11.76s/it]
parquet-cpp-1.5.1 | 3 KB | : 100% 1.0/1 [00:00<00:00, 29.24it/s]
libuuid-2.32.1 | 26 KB | : 100% 1.0/1 [00:00<00:00, 22.55it/s]
uriparser-0.9.3 | 49 KB | : 100% 1.0/1 [00:00<00:00, 27.44it/s]
libev-4.33 | 105 KB | : 100% 1.0/1 [00:00<00:00, 21.53it/s]
c-ares-1.16.1 | 108 KB | : 100% 1.0/1 [00:00<00:00, 18.77it/s]
tzcode-2020a | 425 KB | : 100% 1.0/1 [00:00<00:00, 5.87it/s]
python-dateutil-2.8. | 220 KB | : 100% 1.0/1 [00:00<00:00, 17.19it/s]
geos-3.8.1 | 1.0 MB | : 100% 1.0/1 [00:00<00:00, 4.15it/s]
xorg-libxrender-0.9. | 31 KB | : 100% 1.0/1 [00:00<00:00, 26.87it/s]
libopenblas-0.3.10 | 7.8 MB | : 100% 1.0/1 [00:01<00:00, 1.26s/it]
fastavro-0.24.0 | 390 KB | : 100% 1.0/1 [00:00<00:00, 11.17it/s]
heapdict-1.0.1 | 7 KB | : 100% 1.0/1 [00:00<00:00, 29.84it/s]
pyasn1-0.4.8 | 53 KB | : 100% 1.0/1 [00:00<00:00, 24.32it/s]
gcsfs-0.6.2 | 19 KB | : 100% 1.0/1 [00:00<00:00, 29.75it/s]
pyyaml-5.3.1 | 186 KB | : 100% 1.0/1 [00:00<00:00, 15.60it/s]
poppler-0.88.0 | 13.1 MB | : 100% 1.0/1 [00:01<00:00, 1.53s/it]
oauthlib-3.0.1 | 82 KB | : 100% 1.0/1 [00:00<00:00, 18.14it/s]
libprotobuf-3.8.0 | 4.7 MB | : 100% 1.0/1 [00:00<00:00, 1.15it/s]
openjpeg-2.3.1 | 475 KB | : 100% 1.0/1 [00:00<00:00, 7.88it/s]
cupy-7.7.0 | 20.5 MB | : 100% 1.0/1 [00:02<00:00, 2.96s/it]
libxcb-1.13 | 396 KB | : 100% 1.0/1 [00:00<00:00, 8.29it/s]
cloudpickle-1.5.0 | 22 KB | : 100% 1.0/1 [00:00<00:00, 26.68it/s]
xorg-xproto-7.0.31 | 72 KB | : 100% 1.0/1 [00:00<00:00, 21.80it/s]
libssh2-1.9.0 | 225 KB | : 100% 1.0/1 [00:00<00:00, 12.26it/s]
pcre-8.44 | 261 KB | : 100% 1.0/1 [00:00<00:00, 13.77it/s]
expat-2.2.9 | 191 KB | : 100% 1.0/1 [00:00<00:00, 16.19it/s]
sortedcontainers-2.2 | 25 KB | : 100% 1.0/1 [00:00<00:00, 31.26it/s]
icu-64.2 | 12.6 MB | : 100% 1.0/1 [00:01<00:00, 1.65s/it]
rmm-0.14.0 | 684 KB | : 100% 1.0/1 [00:01<00:00, 13.06s/it]
liblapack-3.8.0 | 11 KB | : 100% 1.0/1 [00:00<00:00, 29.69it/s]
hdf4-4.2.13 | 964 KB | : 100% 1.0/1 [00:00<00:00, 5.63it/s]
brotli-1.0.7 | 386 KB | : 100% 1.0/1 [00:00<00:00, 12.99it/s]
numpy-1.19.1 | 5.2 MB | : 100% 1.0/1 [00:00<00:00, 1.08it/s]
cugraph-0.14.0 | 6.9 MB | : 100% 1.0/1 [00:01<00:00, 1.82s/it]
cairo-1.16.0 | 1.5 MB | : 100% 1.0/1 [00:00<00:00, 3.67it/s]
freetype-2.10.2 | 905 KB | : 100% 1.0/1 [00:00<00:00, 6.52it/s]
libedit-3.1.20191231 | 122 KB | : 100% 1.0/1 [00:00<00:00, 20.75it/s]
llvmlite-0.33.0 | 329 KB | : 100% 1.0/1 [00:00<00:00, 11.61it/s]
jpeg-9d | 266 KB | : 100% 1.0/1 [00:00<00:00, 10.89it/s]
proj-7.0.0 | 3.7 MB | : 100% 1.0/1 [00:00<00:00, 1.58it/s]
pynvml-8.0.4 | 31 KB | : 100% 1.0/1 [00:00<00:00, 28.33it/s]
libblas-3.8.0 | 11 KB | : 100% 1.0/1 [00:00<00:00, 30.07it/s]
xorg-libxau-1.0.9 | 13 KB | : 100% 1.0/1 [00:00<00:00, 31.72it/s]
thrift-cpp-0.12.0 | 2.4 MB | : 100% 1.0/1 [00:00<00:00, 2.36it/s]
bzip2-1.0.8 | 396 KB | : 100% 1.0/1 [00:00<00:00, 11.09it/s]
rsa-4.6 | 27 KB | : 100% 1.0/1 [00:00<00:00, 24.27it/s]
cudf-0.14.0 | 25.7 MB | : 100% 1.0/1 [00:04<00:00, 185.83s/it]
glog-0.4.0 | 104 KB | : 100% 1.0/1 [00:00<00:00, 20.56it/s]
libcumlprims-0.14.1 | 6.0 MB | : 100% 1.0/1 [00:01<00:00, 1.74s/it]
xorg-libx11-1.6.11 | 920 KB | : 100% 1.0/1 [00:00<00:00, 6.30it/s]
libdap4-3.20.6 | 7.9 MB | : 100% 1.0/1 [00:01<00:00, 1.07s/it]
immutables-0.14 | 68 KB | : 100% 1.0/1 [00:00<00:00, 21.82it/s]
lz4-c-1.8.3 | 187 KB | : 100% 1.0/1 [00:00<00:00, 17.65it/s]
libkml-1.3.0 | 643 KB | : 100% 1.0/1 [00:00<00:00, 7.08it/s]
dask-2.22.0 | 4 KB | : 100% 1.0/1 [00:00<00:00, 31.91it/s]
google-auth-oauthlib | 18 KB | : 100% 1.0/1 [00:00<00:00, 26.26it/s]
krb5-1.17.1 | 1.5 MB | : 100% 1.0/1 [00:00<00:00, 4.14it/s]
joblib-0.16.0 | 203 KB | : 100% 1.0/1 [00:00<00:00, 13.50it/s]
libspatialite-4.3.0a | 3.1 MB | : 100% 1.0/1 [00:00<00:00, 1.73it/s]
pandas-0.25.3 | 11.4 MB | : 100% 1.0/1 [00:02<00:00, 2.02s/it]
packaging-20.4 | 32 KB | : 100% 1.0/1 [00:00<00:00, 27.30it/s]
libxml2-2.9.10 | 1.3 MB | : 100% 1.0/1 [00:00<00:00, 3.37it/s]
pyarrow-0.15.0 | 3.2 MB | : 100% 1.0/1 [00:00<00:00, 1.32it/s]
xorg-xextproto-7.3.0 | 27 KB | : 100% 1.0/1 [00:00<00:00, 30.84it/s]
blinker-1.4 | 13 KB | : 100% 1.0/1 [00:00<00:00, 28.23it/s]
zstd-1.4.4 | 982 KB | : 100% 1.0/1 [00:00<00:00, 6.59it/s]
ucx-py-0.14.0+gf6ec8 | 137 KB | : 100% 1.0/1 [00:01<00:00, 1.03s/it]
scikit-learn-0.23.2 | 6.8 MB | : 100% 1.0/1 [00:01<00:00, 1.23s/it]
libgfortran-ng-7.5.0 | 1.3 MB | : 100% 1.0/1 [00:00<00:00, 3.81it/s]
libgdal-3.1.0 | 24.7 MB | : 100% 1.0/1 [00:03<00:00, 3.69s/it]
xorg-kbproto-1.0.7 | 26 KB | : 100% 1.0/1 [00:00<00:00, 27.59it/s]
requests-oauthlib-1. | 21 KB | : 100% 1.0/1 [00:00<00:00, 27.10it/s]
cusignal-0.14.1 | 87 KB | : 100% 1.0/1 [00:00<00:00, 3.15it/s]
pytz-2020.1 | 227 KB | : 100% 1.0/1 [00:00<00:00, 8.70it/s]
poppler-data-0.4.9 | 3.4 MB | : 100% 1.0/1 [00:00<00:00, 1.85it/s]
re2-2020.04.01 | 438 KB | : 100% 1.0/1 [00:00<00:00, 8.61it/s]
tbb-2018.0.5 | 1.1 MB | : 100% 1.0/1 [00:00<00:00, 5.37it/s]
double-conversion-3. | 85 KB | : 100% 1.0/1 [00:00<00:00, 24.62it/s]
jinja2-2.11.2 | 93 KB | : 100% 1.0/1 [00:00<00:00, 22.62it/s]
libcuml-0.14.0 | 42.4 MB | : 100% 1.0/1 [00:20<00:00, 83.38s/it]
libevent-2.1.10 | 1.3 MB | : 100% 1.0/1 [00:00<00:00, 3.36it/s]
libxgboost-1.1.0dev. | 31.1 MB | : 100% 1.0/1 [00:07<00:00, 97.49s/it]
arrow-cpp-0.15.0 | 18.1 MB | : 100% 1.0/1 [00:02<00:00, 1.87s/it]
cuml-0.14.0 | 9.6 MB | : 100% 1.0/1 [00:02<00:00, 2.46s/it]
distributed-2.22.0 | 1.0 MB | : 100% 1.0/1 [00:00<00:00, 3.82it/s]
psutil-5.7.2 | 336 KB | : 100% 1.0/1 [00:00<00:00, 10.56it/s]
msgpack-python-1.0.0 | 91 KB | : 100% 1.0/1 [00:00<00:00, 14.45it/s]
pyjwt-1.7.1 | 17 KB | : 100% 1.0/1 [00:00<00:00, 28.12it/s]
libwebp-base-1.1.0 | 845 KB | : 100% 1.0/1 [00:00<00:00, 4.67it/s]
kealib-1.4.13 | 172 KB | : 100% 1.0/1 [00:00<00:00, 16.88it/s]
fsspec-0.8.0 | 61 KB | : 100% 1.0/1 [00:00<00:00, 22.21it/s]
cytoolz-0.10.1 | 431 KB | : 100% 1.0/1 [00:00<00:00, 9.51it/s]
bokeh-2.1.1 | 6.9 MB | : 100% 1.0/1 [00:01<00:00, 1.52s/it]
scipy-1.4.1 | 18.9 MB | : 100% 1.0/1 [00:02<00:00, 1.78s/it]
xorg-renderproto-0.1 | 8 KB | : 100% 1.0/1 [00:00<00:00, 24.94it/s]
freexl-1.0.5 | 46 KB | : 100% 1.0/1 [00:00<00:00, 28.04it/s]
decorator-4.4.2 | 11 KB | : 100% 1.0/1 [00:00<00:00, 28.34it/s]
fontconfig-2.13.1 | 340 KB | : 100% 1.0/1 [00:00<00:00, 12.09it/s]
libhwloc-2.1.0 | 2.7 MB | : 100% 1.0/1 [00:00<00:00, 2.96it/s]
libpng-1.6.37 | 308 KB | : 100% 1.0/1 [00:00<00:00, 12.31it/s]
dask-cudf-0.14.0 | 81 KB | : 100% 1.0/1 [00:00<00:00, 1.55it/s]
toolz-0.10.0 | 46 KB | : 100% 1.0/1 [00:00<00:00, 22.68it/s]
libnvstrings-0.14.0 | 30.1 MB | : 100% 1.0/1 [00:06<00:00, 6.72s/it]
tornado-6.0.4 | 639 KB | : 100% 1.0/1 [00:00<00:00, 6.67it/s]
giflib-5.2.1 | 80 KB | : 100% 1.0/1 [00:00<00:00, 25.82it/s]
Preparing transaction: done
Verifying transaction: done
Executing transaction: done
Copying shared object files to /usr/lib
Copying RAPIDS compatible xgboost
************************************************
Your Google Colab instance has RAPIDS installed!
************************************************
***********************************************************************
Let us check on those pyarrow and cffi versions...
***********************************************************************
---------------------------------------------------------------------------
KeyError Traceback (most recent call last)
<ipython-input-2-bdfa5194a5f0> in <module>()
8 sys.path = sys.path[:dist_package_index] + ['/usr/local/lib/python3.6/site-packages'] + sys.path[dist_package_index:]
9 sys.path
---> 10 exec(open('rapidsai-csp-utils/colab/update_modules.py').read(), globals())
<string> in <module>()
KeyError: 'pyarrow'
[BUG] XGBoost libraries not being properly found in Colab
calling import xgboost
results in the error
XGBoostLibraryNotFound: Cannot find XGBoost Library in the candidate path, did you install compilers and run build.sh in root path?
List of candidates:
/usr/lib/libxgboost.so
even after successful RAPIDS install
cudf & cugraph error
Hi Everyone!! I am trying to install Rapids (cudf & cugraph) via pip using google colab and here are the commands:
!pip install cudf-cu11 dask-cudf-cu11 --extra-index-url=https://pypi.nvidia.com/
!pip install cugraph-cu11 --extra-index-url=https://pypi.nvidia.com/
several days ago it has no problem, but today it is giving me error as follow:
Looking in indexes: https://pypi.org/simple, https://us-python.pkg.dev/colab-wheels/public/simple/, https://pypi.nvidia.com/
Collecting cugraph-cu11
Using cached cugraph_cu11-23.2.0.tar.gz (6.6 kB)
error: subprocess-exited-with-error
× python setup.py egg_info did not run successfully.
│ exit code: 1
╰─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip.
Preparing metadata (setup.py) ... error
error: metadata-generation-failed
× Encountered error while generating package metadata.
╰─> See above for output.
note: This is an issue with the package mentioned above, not pip.
hint: See above for details.
Does anyone can help me with this? Thank you.
Google Colab demo notebook not working
I've been trying to install rapids stable on a Google Colab notebook and didn't work. After trying many things, I've found the example notebook on your website (https://colab.research.google.com/drive/1rY7Ln6rEE1pOlfSHCYOVaqt8OvDO35J0#forceEdit=true&offline=true&sandboxMode=true) but it doesn't work also.
After executing the installation script successfully import cudf
is raising the following error:
---------------------------------------------------------------------------
OSError Traceback (most recent call last)
<ipython-input-3-a95ca25217db> in <module>()
----> 1 import cudf
2 import io, requests
3
4 # download CSV file from GitHub
5 url="https://github.com/plotly/datasets/raw/master/tips.csv"
5 frames
/usr/local/lib/python3.6/site-packages/llvmlite/binding/ffi.py in <module>()
151 break
152 else:
--> 153 raise OSError("Could not load shared object file: {}".format(_lib_name))
154
155
OSError: Could not load shared object file: libllvmlite.so
Any ideas or possible workarounds? I tried with stable
and nightly
but I'm getting the same error with both.
[BUG] Colab suddenly doesn't install blinker, fails RAPIDS install, in install script
Issue:
The install script fails during transaction execution. Says that there is no '/usr/local/bin/python3.6' even though it was just installed and the file exists.
Preparing transaction: done
Verifying transaction: done
Executing transaction: failed ERROR conda.core.link:_execute(502): An error occurred while installing package 'conda-forge::blinker-1.4-py_1'. FileNotFoundError(2, "No such file or directory: '/usr/local/bin/python3.6'")
Attempting to roll back.
Rolling back transaction: done
FileNotFoundError(2, "No such file or directory: '/usr/local/bin/python3.6'")
Nothing for rapids was installed. User can't import any RAPIDS packages
Reproducible:
Run a rapids install on colab
Additional Notes:
Observed on Wednesday, failing with 0.13 nightlies. Thought it was a nightlies issue, as 0.12 stable worked. Friday, it failed on 0.12 stable.
Miniconda Latest has been upgraded to python 3.8
Results in a long downgrade process
The following packages will be DOWNGRADED:
python 3.8.5-h7579374_1 --> 3.7.10-hdb3f193_0
EDIT: the latest python 3.7 release is: Miniconda3-py37_4.9.2-Linux-x86_64.sh
Seaborn not installing with Conda on Rapids 21.08
Am using Pop!Os and installed using
conda create -n rapids-21.08 -c rapidsai -c nvidia -c conda-forge rapids-blazing=21.08 python=3.8 cudatoolkit=11.2
I'm trying to install Seaborn using
conda install -c anaconda seaborn /* supposed to install 0.11.2
BUT...conda does not seem to want to install. Trying for last 15+ minutes. Just seems to be stuck at "examining conflicts"
Rapids installation goes fine but cannot import libraries: ImportError: Numba needs NumPy 1.24 or less
Rapids on Google Colab is not working today (it was working fine earlier this week). When I run the usual
!git clone https://github.com/rapidsai/rapidsai-csp-utils.git
!python rapidsai-csp-utils/colab/pip-install.py
command, it seems the numpy version installed is 1.24.4 (checked with np.__version__
afterwards) but when I try to load the cudf pandas extension, I get the following error:
---------------------------------------------------------------------------
ImportError Traceback (most recent call last)
<ipython-input-4-92b88e5a8d54> in <cell line: 1>()
----> 1 get_ipython().run_line_magic('load_ext', 'cudf.pandas')
18 frames
<decorator-gen-57> in load_ext(self, module_str)
/usr/local/lib/python3.10/dist-packages/numba/__init__.py in _ensure_critical_deps()
40 raise ImportError(msg)
41 elif numpy_version > (1, 24):
---> 42 raise ImportError("Numba needs NumPy 1.24 or less")
43 try:
44 import scipy
ImportError: Numba needs NumPy 1.24 or less
---------------------------------------------------------------------------
NOTE: If your import is failing due to a missing package, you can
manually install dependencies using either !pip or !apt.
To view examples of installing some common dependencies, click the
"Open Examples" button below.
---------------------------------------------------------------------------
Just to clarify: There are no errors during installation. The error shows up afterwards when I try to import libraries.
No module named 'cudf'
After running the install script on colab and then
import cudf
I get:
ModuleNotFoundError Traceback (most recent call last)
in
----> 1 import cudf
ModuleNotFoundError: No module named 'cudf'
Failed to import CuPy because libcudart.so.11.0 cannot be opened
I'm getting an ImportError
when I try to install rapids on Google Colab. The installation itself doesn't raise an error (it was raising one last week) but after installation is complete, when I try to import cudf, I get an ImportError: libcudart.so.11.0: cannot open shared object file: No such file or directory
.
Steps to reproduce:
!git clone https://github.com/rapidsai/rapidsai-csp-utils.git
!python rapidsai-csp-utils/colab/pip-install.py
import cudf
The full traceback:
---------------------------------------------------------------------------
ImportError Traceback (most recent call last)
[/usr/local/lib/python3.10/dist-packages/cupy/__init__.py](https://localhost:8080/#) in <module>
16 try:
---> 17 from cupy import _core # NOQA
18 except ImportError as exc:
3 frames
ImportError: libcudart.so.11.0: cannot open shared object file: No such file or directory
The above exception was the direct cause of the following exception:
ImportError Traceback (most recent call last)
[/usr/local/lib/python3.10/dist-packages/cupy/__init__.py](https://localhost:8080/#) in <module>
17 from cupy import _core # NOQA
18 except ImportError as exc:
---> 19 raise ImportError(f'''
20 ================================================================
21 {_environment._diagnose_import_error()}
ImportError:
================================================================
Failed to import CuPy.
If you installed CuPy via wheels (cupy-cudaXXX or cupy-rocm-X-X), make sure that the package matches with the version of CUDA or ROCm installed.
On Linux, you may need to set LD_LIBRARY_PATH environment variable depending on how you installed CUDA/ROCm.
On Windows, try setting CUDA_PATH environment variable.
Check the Installation Guide for details:
https://docs.cupy.dev/en/latest/install.html
Original error:
ImportError: libcudart.so.11.0: cannot open shared object file: No such file or directory
================================================================
slow training
Describe the current behavior
after updating the rapid-colab template
it is taking too much time to train. time taken for 1 epoch is 32s
for this new
https://colab.research.google.com/drive/1TAAi_szMfWqRfHVfjGSqnGVLr_ztzUM9?usp=sharing#scrollTo=67T0090Jk2KL
Describe the expected behavior
time taken for 1 epochs is 1s
for this code
please restore shows links for old template
please restore old git without update
please sir i have submit my thesis please restore old code
!git clone https://github.com/rapidsai/rapidsai-csp-utils.git
Cudf file not found
--version
ImportError HostOnlyCUDAMemoryManager when importing cudf
I'm getting this error when installing cudf 0.14 on Google Colab.
I supposed cudf 0.14 is only compatible with numba 0.49 and above, because HostOnlyCUDAMemoryManager
was introduced in that version. I could't test that yet.
Then a change here would also be necassary.
/usr/local/lib/python3.6/dist-packages/numba/cuda/envvars.py:17: NumbaWarning:
Environment variables with the 'NUMBAPRO' prefix are deprecated and consequently ignored, found use of NUMBAPRO_NVVM=/usr/local/cuda/nvvm/lib64/libnvvm.so.
For more information about alternatives visit: ('http://numba.pydata.org/numba-doc/latest/cuda/overview.html', '#cudatoolkit-lookup')
warnings.warn(errors.NumbaWarning(msg))
/usr/local/lib/python3.6/dist-packages/numba/cuda/envvars.py:17: NumbaWarning:
Environment variables with the 'NUMBAPRO' prefix are deprecated and consequently ignored, found use of NUMBAPRO_LIBDEVICE=/usr/local/cuda/nvvm/libdevice/.
For more information about alternatives visit: ('http://numba.pydata.org/numba-doc/latest/cuda/overview.html', '#cudatoolkit-lookup')
warnings.warn(errors.NumbaWarning(msg))
---------------------------------------------------------------------------
ImportError Traceback (most recent call last)
<ipython-input-3-e13365c50bc4> in <module>()
----> 1 import cudf
2 frames
/usr/local/lib/python3.6/site-packages/cudf/__init__.py in <module>()
8 from numba import cuda
9
---> 10 import rmm
11
12 from cudf import core, datasets
/usr/local/lib/python3.6/site-packages/rmm/__init__.py in <module>()
15 import weakref
16
---> 17 from rmm.rmm import (
18 RMMError,
19 RMMNumbaManager,
/usr/local/lib/python3.6/site-packages/rmm/rmm.py in <module>()
18 import numpy as np
19 from numba import cuda
---> 20 from numba.cuda import HostOnlyCUDAMemoryManager, IpcHandle, MemoryPointer
21
22 import rmm._lib as librmm
ImportError: cannot import name 'HostOnlyCUDAMemoryManager'
---------------------------------------------------------------------------
NOTE: If your import is failing due to a missing package, you can
manually install dependencies using either !pip or !apt.
To view examples of installing some common dependencies, click the
"Open Examples" button below.
---------------------------------------------------------------------------
`rapids-conda-colab-template.ipynb` fails to install properly
The Google Colab pip
notebook works fine.
The conda
version failed.
I made a copy of the Google Colab conda
notebook:
https://colab.research.google.com/drive/1TAAi_szMfWqRfHVfjGSqnGVLr_ztzUM9
All cells up to and including this one ran successfully:
# you can now run the rest of the cells as normal
import condacolab
condacolab.check()
This last cell showed output:
✨🍰✨ Everything looks OK!
The next cell failed, though:
# Installing RAPIDS is now 'python rapidsai-csp-utils/colab/install_rapids.py <release> <packages>'
# The <release> options are 'stable' and 'nightly'. Leaving it blank or adding any other words will default to stable.
!python rapidsai-csp-utils/colab/install_rapids.py stable
import os
os.environ['NUMBAPRO_NVVM'] = '/usr/local/cuda/nvvm/lib64/libnvvm.so'
os.environ['NUMBAPRO_LIBDEVICE'] = '/usr/local/cuda/nvvm/libdevice/'
os.environ['CONDA_PREFIX'] = '/usr/local'
!pip uninstall cupy -y
The output is:
Found existing installation: cffi 1.15.0
Uninstalling cffi-1.15.0:
Successfully uninstalled cffi-1.15.0
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
WARNING: Skipping cryptography as it is not installed.
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
Looking in indexes: https://pypi.org/simple, https://us-python.pkg.dev/colab-wheels/public/simple/
Collecting cffi==1.15.0
Using cached cffi-1.15.0-cp39-cp39-manylinux_2_12_x86_64.manylinux2010_x86_64.whl (444 kB)
Requirement already satisfied: pycparser in /usr/local/lib/python3.9/site-packages (from cffi==1.15.0) (2.21)
Installing collected packages: cffi
Successfully installed cffi-1.15.0
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
Installing RAPIDS Stable 22.12
Starting the RAPIDS install on Colab. This will take about 15 minutes.
Collecting package metadata (current_repodata.json): ...working... done
Solving environment: ...working... failed with initial frozen solve. Retrying with flexible solve.
Collecting package metadata (repodata.json): ...working... done
Solving environment: ...working... WARNING conda.core.solve:_add_specs(640): pinned spec python=3.9 conflicts with explicit specs. Overriding pinned spec.
WARNING conda.core.solve:_add_specs(640): pinned spec cudatoolkit=11.8 conflicts with explicit specs. Overriding pinned spec.
failed with initial frozen solve. Retrying with flexible solve.
Solving environment: ...working... WARNING conda.core.solve:_add_specs(640): pinned spec python=3.9 conflicts with explicit specs. Overriding pinned spec.
WARNING conda.core.solve:_add_specs(640): pinned spec cudatoolkit=11.8 conflicts with explicit specs. Overriding pinned spec.
failed
SpecsConfigurationConflictError: Requested specs conflict with configured specs.
requested specs:
- cudatoolkit=11.2
- dask-sql
- gcsfs
- llvmlite
- openssl
- python=3.8
- rapids=22.12
pinned specs:
- python_abi=3.9[build=*cp39*]
Use 'conda config --show-sources' to look for 'pinned_specs' and 'track_features'
configuration parameters. Pinned specs may also be defined in the file
/usr/local/conda-meta/pinned.
RAPIDS conda installation complete. Updating Colab's libraries...
WARNING: Skipping cupy as it is not installed.
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
Just to test, the following cell also failed with ModuleNotFoundError
:
import cudf, cuml, cugraph, cuspatial
Google Colab Pro now providing Tesla V100
However the install script does not recognize V100.
`+-----------------------------------------------------------------------------+
| NVIDIA-SMI 450.66 Driver Version: 418.67 CUDA Version: 10.1 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
| | | MIG M. |
|===============================+======================+======================|
| 0 Tesla V100-SXM2... Off | 00000000:00:04.0 Off | 0 |
| N/A 38C P0 41W / 300W | 10633MiB / 16130MiB | 0% Default |
| | | ERR! |
+-------------------------------+----------------------+----------------------+
+-----------------------------------------------------------------------------+
| Processes: |
| GPU GI CI PID Type Process name GPU Memory |
| ID ID Usage |
|=============================================================================|
| No running processes found |
+-----------------------------------------------------------------------------+`
ImportError: cannot import name 'six' when using stable on colabs
I'm trying to get RAPIDS working on google colabs but on import cudf i get an import error.
Steps to reproduce
Set up
Start colab session.
Connect to GPU runtime, in this instance I was allocated Tesla K80.
Install rapids
# Install RAPIDS
!git clone https://github.com/rapidsai/rapidsai-csp-utils.git
!bash rapidsai-csp-utils/colab/rapids-colab.sh stable
import sys, os
dist_package_index = sys.path.index('/usr/local/lib/python3.6/dist-packages')
sys.path = sys.path[:dist_package_index] + ['/usr/local/lib/python3.6/site-packages'] + sys.path[dist_package_index:]
sys.path
exec(open('rapidsai-csp-utils/colab/update_modules.py').read(), globals())
Cloning into 'rapidsai-csp-utils'...
remote: Enumerating objects: 103, done.
remote: Counting objects: 100% (103/103), done.
remote: Compressing objects: 100% (101/101), done.
remote: Total 103 (delta 21), reused 14 (delta 1), pack-reused 0
Receiving objects: 100% (103/103), 30.32 KiB | 195.00 KiB/s, done.
Resolving deltas: 100% (21/21), done.
PLEASE READ
Changes:
- Now that most people have migrated, we have rem0ved the migration notice.
- default stable version is now 0.13. Nightly is now 0.14
- You can now declare your RAPIDS version as a CLI option and skip the user prompts (ex: '0.13' or '0.14', between 0.11 to 0.14, without the quotes):
"!bash rapidsai-csp-utils/colab/rapids-colab.sh <version/label>"
Examples: '!bash rapidsai-csp-utils/colab/rapids-colab.sh 0.13', or '!bash rapidsai-csp-utils/colab/rapids-colab.sh stable', or '!bash rapidsai-csp-utils/colab/rapids-colab.sh s'
'!bash rapidsai-csp-utils/colab/rapids-colab.sh 0.14, or '!bash rapidsai-csp-utils/colab/rapids-colab.sh nightly', or '!bash rapidsai-csp-utils/colab/rapids-colab.sh n'
Enjoy using RAPIDS!
Starting to prep Colab for install RAPIDS Version 0.13 stable
Checking for GPU type:
Woo! Your instance has the right kind of GPU, a 'Tesla T4'!
Removing conflicting packages, will replace with RAPIDS compatible versions
Uninstalling xgboost-0.90:
Successfully uninstalled xgboost-0.90
Uninstalling dask-2.12.0:
Successfully uninstalled dask-2.12.0
Uninstalling distributed-1.25.3:
Successfully uninstalled distributed-1.25.3
Installing conda
--2020-05-28 14:31:42-- https://repo.continuum.io/miniconda/Miniconda3-4.5.4-Linux-x86_64.sh
Resolving repo.continuum.io (repo.continuum.io)... 104.18.200.79, 104.18.201.79, 2606:4700::6812:c84f, ...
Connecting to repo.continuum.io (repo.continuum.io)|104.18.200.79|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://repo.anaconda.com/miniconda/Miniconda3-4.5.4-Linux-x86_64.sh [following]
--2020-05-28 14:31:42-- https://repo.anaconda.com/miniconda/Miniconda3-4.5.4-Linux-x86_64.sh
Resolving repo.anaconda.com (repo.anaconda.com)... 104.16.131.3, 104.16.130.3, 2606:4700::6810:8303, ...
Connecting to repo.anaconda.com (repo.anaconda.com)|104.16.131.3|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 58468498 (56M) [application/x-sh]
Saving to: ‘Miniconda3-4.5.4-Linux-x86_64.sh’Miniconda3-4.5.4-Li 100%[===================>] 55.76M 124MB/s in 0.4s
2020-05-28 14:31:42 (124 MB/s) - ‘Miniconda3-4.5.4-Linux-x86_64.sh’ saved [58468498/58468498]
PREFIX=/usr/local
installing: python-3.6.5-hc3d631a_2 ...
Python 3.6.5 :: Anaconda, Inc.
installing: ca-certificates-2018.03.07-0 ...
installing: conda-env-2.6.0-h36134e3_1 ...
installing: libgcc-ng-7.2.0-hdf63c60_3 ...
installing: libstdcxx-ng-7.2.0-hdf63c60_3 ...
installing: libffi-3.2.1-hd88cf55_4 ...
installing: ncurses-6.1-hf484d3e_0 ...
installing: openssl-1.0.2o-h20670df_0 ...
installing: tk-8.6.7-hc745277_3 ...
installing: xz-5.2.4-h14c3975_4 ...
installing: yaml-0.1.7-had09818_2 ...
installing: zlib-1.2.11-ha838bed_2 ...
installing: libedit-3.1.20170329-h6b74fdf_2 ...
installing: readline-7.0-ha6073c6_4 ...
installing: sqlite-3.23.1-he433501_0 ...
installing: asn1crypto-0.24.0-py36_0 ...
installing: certifi-2018.4.16-py36_0 ...
installing: chardet-3.0.4-py36h0f667ec_1 ...
installing: idna-2.6-py36h82fb2a8_1 ...
installing: pycosat-0.6.3-py36h0a5515d_0 ...
installing: pycparser-2.18-py36hf9f622e_1 ...
installing: pysocks-1.6.8-py36_0 ...
installing: ruamel_yaml-0.15.37-py36h14c3975_2 ...
installing: six-1.11.0-py36h372c433_1 ...
installing: cffi-1.11.5-py36h9745a5d_0 ...
installing: setuptools-39.2.0-py36_0 ...
installing: cryptography-2.2.2-py36h14c3975_0 ...
installing: wheel-0.31.1-py36_0 ...
installing: pip-10.0.1-py36_0 ...
installing: pyopenssl-18.0.0-py36_0 ...
installing: urllib3-1.22-py36hbe7ace6_0 ...
installing: requests-2.18.4-py36he2e5f8d_1 ...
installing: conda-4.5.4-py36_0 ...
installation finished.
WARNING:
You currently have a PYTHONPATH environment variable set. This may cause
unexpected behavior when running the Python interpreter in Miniconda3.
For best results, please verify that your PYTHONPATH only points to
directories of packages that are compatible with the Python interpreter
in Miniconda3: /usr/local
Solving environment: done==> WARNING: A newer version of conda exists. <==
current version: 4.5.4
latest version: 4.8.3Please update conda by running
$ conda update -n base conda
Package Plan
environment location: /usr/local
added / updated specs:
- openssl
- python=3.6The following packages will be downloaded:
package | build ---------------------------|----------------- _openmp_mutex-4.5 | 0_gnu 435 KB conda-forge setuptools-47.1.0 | py36h9f0ad1d_0 636 KB conda-forge ca-certificates-2020.4.5.1 | hecc5488_0 146 KB conda-forge tk-8.6.10 | hed695b0_0 3.2 MB conda-forge xz-5.2.5 | h516909a_0 430 KB conda-forge libgcc-ng-9.2.0 | h24d8f2e_2 8.2 MB conda-forge libgomp-9.2.0 | h24d8f2e_2 816 KB conda-forge zlib-1.2.11 | h516909a_1006 105 KB conda-forge certifi-2020.4.5.1 | py36h9f0ad1d_0 151 KB conda-forge ld_impl_linux-64-2.34 | h53a641e_4 616 KB conda-forge python-3.6.10 |h8356626_1011_cpython 34.1 MB conda-forge ncurses-6.1 | hf484d3e_1002 1.3 MB conda-forge pip-20.1.1 | py_1 1.1 MB conda-forge libffi-3.2.1 | he1b5a44_1007 47 KB conda-forge openssl-1.1.1g | h516909a_0 2.1 MB conda-forge libstdcxx-ng-9.2.0 | hdf63c60_2 4.5 MB conda-forge readline-8.0 | hf8c457e_0 441 KB conda-forge wheel-0.34.2 | py_1 24 KB conda-forge sqlite-3.30.1 | hcee41ef_0 2.0 MB conda-forge _libgcc_mutex-0.1 | conda_forge 3 KB conda-forge python_abi-3.6 | 1_cp36m 4 KB conda-forge ------------------------------------------------------------ Total: 60.2 MB
The following NEW packages will be INSTALLED:
_libgcc_mutex: 0.1-conda_forge conda-forge _openmp_mutex: 4.5-0_gnu conda-forge ld_impl_linux-64: 2.34-h53a641e_4 conda-forge libgomp: 9.2.0-h24d8f2e_2 conda-forge python_abi: 3.6-1_cp36m conda-forge
The following packages will be UPDATED:
ca-certificates: 2018.03.07-0 --> 2020.4.5.1-hecc5488_0 conda-forge certifi: 2018.4.16-py36_0 --> 2020.4.5.1-py36h9f0ad1d_0 conda-forge libffi: 3.2.1-hd88cf55_4 --> 3.2.1-he1b5a44_1007 conda-forge libgcc-ng: 7.2.0-hdf63c60_3 --> 9.2.0-h24d8f2e_2 conda-forge libstdcxx-ng: 7.2.0-hdf63c60_3 --> 9.2.0-hdf63c60_2 conda-forge ncurses: 6.1-hf484d3e_0 --> 6.1-hf484d3e_1002 conda-forge openssl: 1.0.2o-h20670df_0 --> 1.1.1g-h516909a_0 conda-forge pip: 10.0.1-py36_0 --> 20.1.1-py_1 conda-forge python: 3.6.5-hc3d631a_2 --> 3.6.10-h8356626_1011_cpython conda-forge readline: 7.0-ha6073c6_4 --> 8.0-hf8c457e_0 conda-forge setuptools: 39.2.0-py36_0 --> 47.1.0-py36h9f0ad1d_0 conda-forge sqlite: 3.23.1-he433501_0 --> 3.30.1-hcee41ef_0 conda-forge tk: 8.6.7-hc745277_3 --> 8.6.10-hed695b0_0 conda-forge wheel: 0.31.1-py36_0 --> 0.34.2-py_1 conda-forge xz: 5.2.4-h14c3975_4 --> 5.2.5-h516909a_0 conda-forge zlib: 1.2.11-ha838bed_2 --> 1.2.11-h516909a_1006 conda-forge
Downloading and Extracting Packages
_openmp_mutex-4.5 | 435 KB | : 100% 1.0/1 [00:00<00:00, 13.04it/s]
setuptools-47.1.0 | 636 KB | : 100% 1.0/1 [00:00<00:00, 4.85it/s]
ca-certificates-2020 | 146 KB | : 100% 1.0/1 [00:00<00:00, 23.15it/s]
tk-8.6.10 | 3.2 MB | : 100% 1.0/1 [00:00<00:00, 1.61it/s]
xz-5.2.5 | 430 KB | : 100% 1.0/1 [00:00<00:00, 7.68it/s]
libgcc-ng-9.2.0 | 8.2 MB | : 100% 1.0/1 [00:01<00:00, 1.16s/it]
libgomp-9.2.0 | 816 KB | : 100% 1.0/1 [00:00<00:00, 6.33it/s]
zlib-1.2.11 | 105 KB | : 100% 1.0/1 [00:00<00:00, 21.06it/s]
certifi-2020.4.5.1 | 151 KB | : 100% 1.0/1 [00:00<00:00, 20.08it/s]
ld_impl_linux-64-2.3 | 616 KB | : 100% 1.0/1 [00:00<00:00, 6.84it/s]
python-3.6.10 | 34.1 MB | : 100% 1.0/1 [00:04<00:00, 4.84s/it]
ncurses-6.1 | 1.3 MB | : 100% 1.0/1 [00:00<00:00, 1.26it/s]
pip-20.1.1 | 1.1 MB | : 100% 1.0/1 [00:00<00:00, 3.16it/s]
libffi-3.2.1 | 47 KB | : 100% 1.0/1 [00:00<00:00, 25.64it/s]
openssl-1.1.1g | 2.1 MB | : 100% 1.0/1 [00:00<00:00, 2.33it/s]
libstdcxx-ng-9.2.0 | 4.5 MB | : 100% 1.0/1 [00:00<00:00, 1.55it/s]
readline-8.0 | 441 KB | : 100% 1.0/1 [00:00<00:00, 9.30it/s]
wheel-0.34.2 | 24 KB | : 100% 1.0/1 [00:00<00:00, 19.40it/s]
sqlite-3.30.1 | 2.0 MB | : 100% 1.0/1 [00:00<00:00, 3.34it/s]
_libgcc_mutex-0.1 | 3 KB | : 100% 1.0/1 [00:00<00:00, 36.58it/s]
python_abi-3.6 | 4 KB | : 100% 1.0/1 [00:00<00:00, 38.29it/s]
Preparing transaction: done
Verifying transaction: done
Executing transaction: done
Installing RAPIDS 0.13 packages from the stable release channel
Please standby, this will take a few minutes...
Solving environment: done==> WARNING: A newer version of conda exists. <==
current version: 4.5.4
latest version: 4.8.3Please update conda by running
$ conda update -n base conda
Package Plan
environment location: /usr/local
added / updated specs:
- cudatoolkit=10.0
- cudf=0.13
- cugraph
- cuml
- cusignal
- cuspatial
- dask-cudf
- gcsfs
- pynvml
- python=3.6
- xgboost=1.0.2dev.rapidsai0.13The following packages will be downloaded:
package | build ---------------------------|----------------- decorator-4.4.2 | py_0 11 KB conda-forge scikit-learn-0.23.1 | py36h0e1014b_0 6.8 MB conda-forge libcuspatial-0.13.0 | cuda10.0_0 1.7 MB rapidsai/label/main olefile-0.46 | py_0 31 KB conda-forge libnetcdf-4.7.4 |nompi_h9f9fd6a_101 1.3 MB conda-forge pyopenssl-19.1.0 | py_1 47 KB conda-forge lz4-c-1.8.3 | he1b5a44_1001 187 KB conda-forge nccl-2.5.7.1 | hd6f8bf8_0 96.6 MB conda-forge jpeg-9c | h14c3975_1001 251 KB conda-forge locket-0.2.0 | py_2 6 KB conda-forge py-xgboost-1.0.2dev.rapidsai0.13| cuda10.0py36_6 100 KB rapidsai/label/main libblas-3.8.0 | 14_openblas 10 KB conda-forge glib-2.64.3 | h6f030ca_0 3.4 MB conda-forge freexl-1.0.5 | h14c3975_1002 43 KB conda-forge xorg-libice-1.0.10 | h516909a_0 57 KB conda-forge pynvml-8.0.4 | py_0 31 KB conda-forge libcuml-0.13.0 | cuda10.0_0 51.6 MB rapidsai/label/main libxgboost-1.0.2dev.rapidsai0.13| cuda10.0_6 21.9 MB rapidsai/label/main hdf5-1.10.5 |nompi_h3c11f04_1104 3.1 MB conda-forge pyyaml-5.1.2 | py36h516909a_0 184 KB conda-forge scipy-1.4.1 | py36h2d22cac_3 18.9 MB conda-forge curl-7.69.1 | h33f0ec9_0 137 KB conda-forge libdap4-3.20.6 | h1d1bd15_0 18.2 MB conda-forge giflib-5.2.1 | h516909a_2 80 KB conda-forge cuml-0.13.0 | cuda10.0_py36_0 9.2 MB rapidsai/label/main numba-0.49.1 | py36h830a2c2_0 3.5 MB conda-forge rsa-4.0 | py_0 27 KB conda-forge libspatialite-4.3.0a | h2482549_1038 3.1 MB conda-forge llvmlite-0.32.0 | py36hfa65bc7_0 323 KB conda-forge cachetools-4.1.0 | py_1 12 KB conda-forge geos-3.8.1 | he1b5a44_0 1.0 MB conda-forge uriparser-0.9.3 | he1b5a44_1 49 KB conda-forge pandas-0.25.3 | py36hb3f55d8_0 11.4 MB conda-forge joblib-0.15.1 | py_0 202 KB conda-forge numpy-1.17.5 | py36h95a1406_0 5.2 MB conda-forge xorg-renderproto-0.11.1 | h14c3975_1002 8 KB conda-forge libgdal-2.4.4 | h5439ffd_1 18.6 MB conda-forge boost-cpp-1.70.0 | h8e57a91_2 21.1 MB conda-forge libkml-1.3.0 | h4fcabce_1010 643 KB conda-forge libpq-12.2 | h5513abc_1 2.6 MB conda-forge cudf-0.13.0 | py36_0 32.6 MB rapidsai/label/main xorg-libx11-1.6.9 | h516909a_0 918 KB conda-forge geotiff-1.5.1 | h05acad5_10 279 KB conda-forge re2-2020.04.01 | he1b5a44_0 438 KB conda-forge packaging-20.4 | pyh9f0ad1d_0 32 KB conda-forge krb5-1.17.1 | h2fd8d38_0 1.5 MB conda-forge kealib-1.4.13 | hec59c27_0 172 KB conda-forge nvstrings-0.13.0 | py36_0 129 KB rapidsai/label/main arrow-cpp-0.15.0 | py36h090bef1_2 18.1 MB conda-forge cugraph-0.13.0 | py36_0 7.3 MB rapidsai/label/main pyparsing-2.4.7 | pyh9f0ad1d_0 60 KB conda-forge libcumlprims-0.13.0 | cuda10.0_0 3.3 MB nvidia parquet-cpp-1.5.1 | 2 3 KB conda-forge brotli-1.0.7 | he1b5a44_1002 1.0 MB conda-forge bzip2-1.0.8 | h516909a_2 396 KB conda-forge grpc-cpp-1.23.0 | h18db393_0 4.5 MB conda-forge pillow-7.1.2 | py36h8328e55_0 656 KB conda-forge boost-1.70.0 | py36h9de70de_1 337 KB conda-forge libcblas-3.8.0 | 14_openblas 10 KB conda-forge pyarrow-0.15.0 | py36h8b68381_1 3.2 MB conda-forge xorg-xextproto-7.3.0 | h14c3975_1002 27 KB conda-forge cloudpickle-1.4.1 | py_0 24 KB conda-forge libcudf-0.13.0 | cuda10.0_0 136.5 MB rapidsai/label/main libssh2-1.9.0 | hab1572f_2 298 KB conda-forge openjpeg-2.3.1 | h981e76c_3 475 KB conda-forge pcre-8.44 | he1b5a44_0 261 KB conda-forge pytz-2020.1 | pyh9f0ad1d_0 227 KB conda-forge poppler-data-0.4.9 | 1 3.4 MB conda-forge libxcb-1.13 | h14c3975_1002 396 KB conda-forge python-dateutil-2.8.1 | py_0 220 KB conda-forge freetype-2.10.2 | he06d7ca_0 905 KB conda-forge sortedcontainers-2.1.0 | py_0 25 KB conda-forge xorg-kbproto-1.0.7 | h14c3975_1002 26 KB conda-forge libprotobuf-3.8.0 | h8b12597_0 4.7 MB conda-forge bokeh-2.0.1 | py36h9f0ad1d_0 6.8 MB conda-forge zict-2.0.0 | py_0 10 KB conda-forge liblapack-3.8.0 | 14_openblas 10 KB conda-forge ucx-py-0.13.0+g9d06c3a | py36_0 287 KB rapidsai/label/main pthread-stubs-0.4 | h14c3975_1001 5 KB conda-forge glog-0.4.0 | h49b9bf7_3 104 KB conda-forge xorg-libsm-1.2.3 | h84519dc_1000 25 KB conda-forge libtiff-4.1.0 | hfc65ed5_0 595 KB conda-forge blinker-1.4 | py_1 13 KB conda-forge libcurl-7.69.1 | hf7181ac_0 573 KB conda-forge immutables-0.14 | py36h8c4c3a4_0 68 KB conda-forge xorg-libxdmcp-1.1.3 | h516909a_0 18 KB conda-forge threadpoolctl-2.0.0 | pyh5ca1d4c_0 14 KB conda-forge gettext-0.19.8.1 | hc5be6a0_1002 3.6 MB conda-forge libhwloc-2.1.0 | h3c4fd83_0 2.7 MB conda-forge json-c-0.13.1 | hbfbb72e_1002 76 KB conda-forge fastavro-0.23.4 | py36h8c4c3a4_0 415 KB conda-forge click-7.1.2 | pyh9f0ad1d_0 64 KB conda-forge zstd-1.4.3 | h3b9ef0a_0 935 KB conda-forge typing_extensions-3.7.4.2 | py_0 25 KB conda-forge cfitsio-3.470 | h3eac812_5 1.3 MB conda-forge contextvars-2.4 | py_0 11 KB conda-forge gflags-2.2.2 | he1b5a44_1002 175 KB conda-forge fsspec-0.6.3 | py_0 48 KB conda-forge gcsfs-0.6.2 | py_0 19 KB conda-forge libgfortran-ng-7.5.0 | hdf63c60_6 1.7 MB conda-forge dask-core-2.17.0 | py_0 612 KB conda-forge hdf4-4.2.13 | hf30be14_1003 964 KB conda-forge tblib-1.6.0 | py_0 14 KB conda-forge distributed-2.17.0 | py36h9f0ad1d_0 1.0 MB conda-forge expat-2.2.9 | he1b5a44_2 191 KB conda-forge libpng-1.6.37 | hed695b0_1 308 KB conda-forge cryptography-2.9.2 | py36h45558ae_0 613 KB conda-forge dask-cudf-0.13.0 | py36_0 76 KB rapidsai/label/main jinja2-2.11.2 | pyh9f0ad1d_0 93 KB conda-forge libevent-2.1.10 | h72c5cf5_0 1.3 MB conda-forge requests-oauthlib-1.2.0 | py_0 19 KB conda-forge oauthlib-3.0.1 | py_0 82 KB conda-forge icu-64.2 | he1b5a44_1 12.6 MB conda-forge cytoolz-0.10.1 | py36h516909a_0 431 KB conda-forge libnvstrings-0.13.0 | cuda10.0_0 29.6 MB rapidsai/label/main xorg-libxext-1.3.4 | h516909a_0 51 KB conda-forge libiconv-1.15 | h516909a_1006 2.0 MB conda-forge libxml2-2.9.10 | hee79883_0 1.3 MB conda-forge double-conversion-3.1.5 | he1b5a44_2 85 KB conda-forge xorg-libxau-1.0.9 | h14c3975_0 13 KB conda-forge rmm-0.13.0 | py36_0 687 KB rapidsai/label/main pixman-0.38.0 | h516909a_1003 594 KB conda-forge xorg-libxrender-0.9.10 | h516909a_1002 31 KB conda-forge requests-2.23.0 | pyh8c360ce_2 47 KB conda-forge cudatoolkit-10.0.130 | 0 380.0 MB nvidia xorg-xproto-7.0.31 | h14c3975_1007 72 KB conda-forge libuuid-2.32.1 | h14c3975_1000 26 KB conda-forge ucx-1.7.0+g9d06c3a | cuda10.0_0 8.2 MB rapidsai/label/main partd-1.1.0 | py_0 17 KB conda-forge brotlipy-0.7.0 |py36h8c4c3a4_1000 346 KB conda-forge tornado-6.0.4 | py36h8c4c3a4_1 639 KB conda-forge proj-7.0.0 | h966b41f_4 3.7 MB conda-forge toolz-0.10.0 | py_0 46 KB conda-forge dlpack-0.2 | he1b5a44_1 13 KB conda-forge librmm-0.13.0 | cuda10.0_0 70 KB rapidsai/label/main postgresql-12.2 | h8573dbc_1 5.0 MB conda-forge xgboost-1.0.2dev.rapidsai0.13| cuda10.0py36_6 12 KB rapidsai/label/main cudnn-7.6.0 | cuda10.0_0 216.6 MB nvidia markupsafe-1.1.1 | py36h8c4c3a4_1 26 KB conda-forge psutil-5.7.0 | py36h8c4c3a4_1 324 KB conda-forge gdal-2.4.4 | py36hbb8311d_1 1.2 MB conda-forge tzcode-2020a | h516909a_0 425 KB conda-forge cupy-7.4.0 | py36h273e724_3 14.7 MB conda-forge fontconfig-2.13.1 | h86ecdb6_1001 340 KB conda-forge dask-2.17.0 | py_0 4 KB conda-forge c-ares-1.15.0 | h516909a_1001 100 KB conda-forge cuspatial-0.13.0 | py36_0 1.7 MB rapidsai/label/main google-auth-1.14.3 | pyh9f0ad1d_0 54 KB conda-forge libopenblas-0.3.7 | h5ec1e0e_6 7.6 MB conda-forge cairo-1.16.0 | hcf35c78_1003 1.5 MB conda-forge xerces-c-3.2.2 | h8412b87_1004 1.7 MB conda-forge fastrlock-0.4 |py36h831f99a_1001 32 KB conda-forge snappy-1.1.8 | he1b5a44_1 39 KB conda-forge pyasn1-modules-0.2.7 | py_0 60 KB conda-forge cusignal-0.13.0 | py36_0 67 KB rapidsai/label/main pyasn1-0.4.8 | py_0 53 KB conda-forge libcugraph-0.13.0 | cuda10.0_0 40.0 MB rapidsai/label/main thrift-cpp-0.12.0 | hf3afdfd_1004 2.4 MB conda-forge urllib3-1.25.9 | py_0 92 KB conda-forge msgpack-python-1.0.0 | py36hdb11119_1 91 KB conda-forge google-auth-oauthlib-0.4.1 | py_2 18 KB conda-forge libllvm8-8.0.1 | hc9558a2_0 23.2 MB conda-forge heapdict-1.0.1 | py_0 7 KB conda-forge pyjwt-1.7.1 | py_0 17 KB conda-forge poppler-0.67.0 | h14e79db_8 8.9 MB conda-forge ------------------------------------------------------------ Total: 1.28 GB
The following NEW packages will be INSTALLED:
arrow-cpp: 0.15.0-py36h090bef1_2 conda-forge blinker: 1.4-py_1 conda-forge bokeh: 2.0.1-py36h9f0ad1d_0 conda-forge boost: 1.70.0-py36h9de70de_1 conda-forge boost-cpp: 1.70.0-h8e57a91_2 conda-forge brotli: 1.0.7-he1b5a44_1002 conda-forge brotlipy: 0.7.0-py36h8c4c3a4_1000 conda-forge bzip2: 1.0.8-h516909a_2 conda-forge c-ares: 1.15.0-h516909a_1001 conda-forge cachetools: 4.1.0-py_1 conda-forge cairo: 1.16.0-hcf35c78_1003 conda-forge cfitsio: 3.470-h3eac812_5 conda-forge click: 7.1.2-pyh9f0ad1d_0 conda-forge cloudpickle: 1.4.1-py_0 conda-forge contextvars: 2.4-py_0 conda-forge cudatoolkit: 10.0.130-0 nvidia cudf: 0.13.0-py36_0 rapidsai/label/main cudnn: 7.6.0-cuda10.0_0 nvidia cugraph: 0.13.0-py36_0 rapidsai/label/main cuml: 0.13.0-cuda10.0_py36_0 rapidsai/label/main cupy: 7.4.0-py36h273e724_3 conda-forge curl: 7.69.1-h33f0ec9_0 conda-forge cusignal: 0.13.0-py36_0 rapidsai/label/main cuspatial: 0.13.0-py36_0 rapidsai/label/main cytoolz: 0.10.1-py36h516909a_0 conda-forge dask: 2.17.0-py_0 conda-forge dask-core: 2.17.0-py_0 conda-forge dask-cudf: 0.13.0-py36_0 rapidsai/label/main decorator: 4.4.2-py_0 conda-forge distributed: 2.17.0-py36h9f0ad1d_0 conda-forge dlpack: 0.2-he1b5a44_1 conda-forge double-conversion: 3.1.5-he1b5a44_2 conda-forge expat: 2.2.9-he1b5a44_2 conda-forge fastavro: 0.23.4-py36h8c4c3a4_0 conda-forge fastrlock: 0.4-py36h831f99a_1001 conda-forge fontconfig: 2.13.1-h86ecdb6_1001 conda-forge freetype: 2.10.2-he06d7ca_0 conda-forge freexl: 1.0.5-h14c3975_1002 conda-forge fsspec: 0.6.3-py_0 conda-forge gcsfs: 0.6.2-py_0 conda-forge gdal: 2.4.4-py36hbb8311d_1 conda-forge geos: 3.8.1-he1b5a44_0 conda-forge geotiff: 1.5.1-h05acad5_10 conda-forge gettext: 0.19.8.1-hc5be6a0_1002 conda-forge gflags: 2.2.2-he1b5a44_1002 conda-forge giflib: 5.2.1-h516909a_2 conda-forge glib: 2.64.3-h6f030ca_0 conda-forge glog: 0.4.0-h49b9bf7_3 conda-forge google-auth: 1.14.3-pyh9f0ad1d_0 conda-forge google-auth-oauthlib: 0.4.1-py_2 conda-forge grpc-cpp: 1.23.0-h18db393_0 conda-forge hdf4: 4.2.13-hf30be14_1003 conda-forge hdf5: 1.10.5-nompi_h3c11f04_1104 conda-forge heapdict: 1.0.1-py_0 conda-forge icu: 64.2-he1b5a44_1 conda-forge immutables: 0.14-py36h8c4c3a4_0 conda-forge jinja2: 2.11.2-pyh9f0ad1d_0 conda-forge joblib: 0.15.1-py_0 conda-forge jpeg: 9c-h14c3975_1001 conda-forge json-c: 0.13.1-hbfbb72e_1002 conda-forge kealib: 1.4.13-hec59c27_0 conda-forge krb5: 1.17.1-h2fd8d38_0 conda-forge libblas: 3.8.0-14_openblas conda-forge libcblas: 3.8.0-14_openblas conda-forge libcudf: 0.13.0-cuda10.0_0 rapidsai/label/main libcugraph: 0.13.0-cuda10.0_0 rapidsai/label/main libcuml: 0.13.0-cuda10.0_0 rapidsai/label/main libcumlprims: 0.13.0-cuda10.0_0 nvidia libcurl: 7.69.1-hf7181ac_0 conda-forge libcuspatial: 0.13.0-cuda10.0_0 rapidsai/label/main libdap4: 3.20.6-h1d1bd15_0 conda-forge libevent: 2.1.10-h72c5cf5_0 conda-forge libgdal: 2.4.4-h5439ffd_1 conda-forge libgfortran-ng: 7.5.0-hdf63c60_6 conda-forge libhwloc: 2.1.0-h3c4fd83_0 conda-forge libiconv: 1.15-h516909a_1006 conda-forge libkml: 1.3.0-h4fcabce_1010 conda-forge liblapack: 3.8.0-14_openblas conda-forge libllvm8: 8.0.1-hc9558a2_0 conda-forge libnetcdf: 4.7.4-nompi_h9f9fd6a_101 conda-forge libnvstrings: 0.13.0-cuda10.0_0 rapidsai/label/main libopenblas: 0.3.7-h5ec1e0e_6 conda-forge libpng: 1.6.37-hed695b0_1 conda-forge libpq: 12.2-h5513abc_1 conda-forge libprotobuf: 3.8.0-h8b12597_0 conda-forge librmm: 0.13.0-cuda10.0_0 rapidsai/label/main libspatialite: 4.3.0a-h2482549_1038 conda-forge libssh2: 1.9.0-hab1572f_2 conda-forge libtiff: 4.1.0-hfc65ed5_0 conda-forge libuuid: 2.32.1-h14c3975_1000 conda-forge libxcb: 1.13-h14c3975_1002 conda-forge libxgboost: 1.0.2dev.rapidsai0.13-cuda10.0_6 rapidsai/label/main libxml2: 2.9.10-hee79883_0 conda-forge llvmlite: 0.32.0-py36hfa65bc7_0 conda-forge locket: 0.2.0-py_2 conda-forge lz4-c: 1.8.3-he1b5a44_1001 conda-forge markupsafe: 1.1.1-py36h8c4c3a4_1 conda-forge msgpack-python: 1.0.0-py36hdb11119_1 conda-forge nccl: 2.5.7.1-hd6f8bf8_0 conda-forge numba: 0.49.1-py36h830a2c2_0 conda-forge numpy: 1.17.5-py36h95a1406_0 conda-forge nvstrings: 0.13.0-py36_0 rapidsai/label/main oauthlib: 3.0.1-py_0 conda-forge olefile: 0.46-py_0 conda-forge openjpeg: 2.3.1-h981e76c_3 conda-forge packaging: 20.4-pyh9f0ad1d_0 conda-forge pandas: 0.25.3-py36hb3f55d8_0 conda-forge parquet-cpp: 1.5.1-2 conda-forge partd: 1.1.0-py_0 conda-forge pcre: 8.44-he1b5a44_0 conda-forge pillow: 7.1.2-py36h8328e55_0 conda-forge pixman: 0.38.0-h516909a_1003 conda-forge poppler: 0.67.0-h14e79db_8 conda-forge poppler-data: 0.4.9-1 conda-forge postgresql: 12.2-h8573dbc_1 conda-forge proj: 7.0.0-h966b41f_4 conda-forge psutil: 5.7.0-py36h8c4c3a4_1 conda-forge pthread-stubs: 0.4-h14c3975_1001 conda-forge py-xgboost: 1.0.2dev.rapidsai0.13-cuda10.0py36_6 rapidsai/label/main pyarrow: 0.15.0-py36h8b68381_1 conda-forge pyasn1: 0.4.8-py_0 conda-forge pyasn1-modules: 0.2.7-py_0 conda-forge pyjwt: 1.7.1-py_0 conda-forge pynvml: 8.0.4-py_0 conda-forge pyparsing: 2.4.7-pyh9f0ad1d_0 conda-forge python-dateutil: 2.8.1-py_0 conda-forge pytz: 2020.1-pyh9f0ad1d_0 conda-forge pyyaml: 5.1.2-py36h516909a_0 conda-forge re2: 2020.04.01-he1b5a44_0 conda-forge requests-oauthlib: 1.2.0-py_0 conda-forge rmm: 0.13.0-py36_0 rapidsai/label/main rsa: 4.0-py_0 conda-forge scikit-learn: 0.23.1-py36h0e1014b_0 conda-forge scipy: 1.4.1-py36h2d22cac_3 conda-forge snappy: 1.1.8-he1b5a44_1 conda-forge sortedcontainers: 2.1.0-py_0 conda-forge tblib: 1.6.0-py_0 conda-forge threadpoolctl: 2.0.0-pyh5ca1d4c_0 conda-forge thrift-cpp: 0.12.0-hf3afdfd_1004 conda-forge toolz: 0.10.0-py_0 conda-forge tornado: 6.0.4-py36h8c4c3a4_1 conda-forge typing_extensions: 3.7.4.2-py_0 conda-forge tzcode: 2020a-h516909a_0 conda-forge ucx: 1.7.0+g9d06c3a-cuda10.0_0 rapidsai/label/main ucx-py: 0.13.0+g9d06c3a-py36_0 rapidsai/label/main uriparser: 0.9.3-he1b5a44_1 conda-forge xerces-c: 3.2.2-h8412b87_1004 conda-forge xgboost: 1.0.2dev.rapidsai0.13-cuda10.0py36_6 rapidsai/label/main xorg-kbproto: 1.0.7-h14c3975_1002 conda-forge xorg-libice: 1.0.10-h516909a_0 conda-forge xorg-libsm: 1.2.3-h84519dc_1000 conda-forge xorg-libx11: 1.6.9-h516909a_0 conda-forge xorg-libxau: 1.0.9-h14c3975_0 conda-forge xorg-libxdmcp: 1.1.3-h516909a_0 conda-forge xorg-libxext: 1.3.4-h516909a_0 conda-forge xorg-libxrender: 0.9.10-h516909a_1002 conda-forge xorg-renderproto: 0.11.1-h14c3975_1002 conda-forge xorg-xextproto: 7.3.0-h14c3975_1002 conda-forge xorg-xproto: 7.0.31-h14c3975_1007 conda-forge zict: 2.0.0-py_0 conda-forge zstd: 1.4.3-h3b9ef0a_0 conda-forge
The following packages will be UPDATED:
cryptography: 2.2.2-py36h14c3975_0 --> 2.9.2-py36h45558ae_0 conda-forge pyopenssl: 18.0.0-py36_0 --> 19.1.0-py_1 conda-forge requests: 2.18.4-py36he2e5f8d_1 --> 2.23.0-pyh8c360ce_2 conda-forge urllib3: 1.22-py36hbe7ace6_0 --> 1.25.9-py_0 conda-forge
Downloading and Extracting Packages
decorator-4.4.2 | 11 KB | : 100% 1.0/1 [00:00<00:00, 9.99it/s]
scikit-learn-0.23.1 | 6.8 MB | : 100% 1.0/1 [00:01<00:00, 1.59s/it]
libcuspatial-0.13.0 | 1.7 MB | : 100% 1.0/1 [00:03<00:00, 3.83s/it]
olefile-0.46 | 31 KB | : 100% 1.0/1 [00:00<00:00, 12.84it/s]
libnetcdf-4.7.4 | 1.3 MB | : 100% 1.0/1 [00:00<00:00, 4.09it/s]
pyopenssl-19.1.0 | 47 KB | : 100% 1.0/1 [00:00<00:00, 21.13it/s]
lz4-c-1.8.3 | 187 KB | : 100% 1.0/1 [00:00<00:00, 14.25it/s]
nccl-2.5.7.1 | 96.6 MB | : 100% 1.0/1 [00:12<00:00, 12.54s/it]
jpeg-9c | 251 KB | : 100% 1.0/1 [00:00<00:00, 11.64it/s]
locket-0.2.0 | 6 KB | : 100% 1.0/1 [00:00<00:00, 33.22it/s]
py-xgboost-1.0.2dev. | 100 KB | : 100% 1.0/1 [00:02<00:00, 2.05s/it]
libblas-3.8.0 | 10 KB | : 100% 1.0/1 [00:00<00:00, 28.11it/s]
glib-2.64.3 | 3.4 MB | : 100% 1.0/1 [00:00<00:00, 1.33it/s]
freexl-1.0.5 | 43 KB | : 100% 1.0/1 [00:00<00:00, 28.01it/s]
xorg-libice-1.0.10 | 57 KB | : 100% 1.0/1 [00:00<00:00, 26.68it/s]
pynvml-8.0.4 | 31 KB | : 100% 1.0/1 [00:00<00:00, 28.88it/s]
libcuml-0.13.0 | 51.6 MB | : 100% 1.0/1 [00:16<00:00, 16.41s/it]
libxgboost-1.0.2dev. | 21.9 MB | : 100% 1.0/1 [00:08<00:00, 8.88s/it]
hdf5-1.10.5 | 3.1 MB | : 100% 1.0/1 [00:00<00:00, 1.78it/s]
pyyaml-5.1.2 | 184 KB | : 100% 1.0/1 [00:00<00:00, 14.78it/s]
scipy-1.4.1 | 18.9 MB | : 100% 1.0/1 [00:03<00:00, 3.52s/it]
curl-7.69.1 | 137 KB | : 100% 1.0/1 [00:00<00:00, 22.68it/s]
libdap4-3.20.6 | 18.2 MB | : 100% 1.0/1 [00:02<00:00, 2.76s/it]
giflib-5.2.1 | 80 KB | : 100% 1.0/1 [00:00<00:00, 18.64it/s]
cuml-0.13.0 | 9.2 MB | : 100% 1.0/1 [00:05<00:00, 5.97s/it]
numba-0.49.1 | 3.5 MB | : 100% 1.0/1 [00:01<00:00, 1.76s/it]
rsa-4.0 | 27 KB | : 100% 1.0/1 [00:00<00:00, 7.84it/s]
libspatialite-4.3.0a | 3.1 MB | : 100% 1.0/1 [00:00<00:00, 1.66it/s]
llvmlite-0.32.0 | 323 KB | : 100% 1.0/1 [00:00<00:00, 10.29it/s]
cachetools-4.1.0 | 12 KB | : 100% 1.0/1 [00:00<00:00, 29.59it/s]
geos-3.8.1 | 1.0 MB | : 100% 1.0/1 [00:00<00:00, 2.68it/s]
uriparser-0.9.3 | 49 KB | : 100% 1.0/1 [00:00<00:00, 19.16it/s]
pandas-0.25.3 | 11.4 MB | : 100% 1.0/1 [00:02<00:00, 2.62s/it]
joblib-0.15.1 | 202 KB | : 100% 1.0/1 [00:00<00:00, 9.96it/s]
numpy-1.17.5 | 5.2 MB | : 100% 1.0/1 [00:01<00:00, 1.18s/it]
xorg-renderproto-0.1 | 8 KB | : 100% 1.0/1 [00:00<00:00, 14.55it/s]
libgdal-2.4.4 | 18.6 MB | : 100% 1.0/1 [00:06<00:00, 6.19s/it]
boost-cpp-1.70.0 | 21.1 MB | : 100% 1.0/1 [00:08<00:00, 8.96s/it]
libkml-1.3.0 | 643 KB | : 100% 1.0/1 [00:00<00:00, 5.72it/s]
libpq-12.2 | 2.6 MB | : 100% 1.0/1 [00:00<00:00, 1.45it/s]
cudf-0.13.0 | 32.6 MB | : 100% 1.0/1 [00:11<00:00, 11.10s/it]
xorg-libx11-1.6.9 | 918 KB | : 100% 1.0/1 [00:00<00:00, 3.97it/s]
geotiff-1.5.1 | 279 KB | : 100% 1.0/1 [00:00<00:00, 11.93it/s]
re2-2020.04.01 | 438 KB | : 100% 1.0/1 [00:00<00:00, 8.62it/s]
packaging-20.4 | 32 KB | : 100% 1.0/1 [00:00<00:00, 18.62it/s]
krb5-1.17.1 | 1.5 MB | : 100% 1.0/1 [00:00<00:00, 3.10it/s]
kealib-1.4.13 | 172 KB | : 100% 1.0/1 [00:00<00:00, 14.44it/s]
nvstrings-0.13.0 | 129 KB | : 100% 1.0/1 [00:02<00:00, 2.04s/it]
arrow-cpp-0.15.0 | 18.1 MB | : 100% 1.0/1 [00:03<00:00, 3.25s/it]
cugraph-0.13.0 | 7.3 MB | : 100% 1.0/1 [00:03<00:00, 3.06s/it]
pyparsing-2.4.7 | 60 KB | : 100% 1.0/1 [00:00<00:00, 18.86it/s]
libcumlprims-0.13.0 | 3.3 MB | : 100% 1.0/1 [00:02<00:00, 2.30s/it]
parquet-cpp-1.5.1 | 3 KB | : 100% 1.0/1 [00:00<00:00, 24.81it/s]
brotli-1.0.7 | 1.0 MB | : 100% 1.0/1 [00:00<00:00, 5.17it/s]
bzip2-1.0.8 | 396 KB | : 100% 1.0/1 [00:00<00:00, 10.07it/s]
grpc-cpp-1.23.0 | 4.5 MB | : 100% 1.0/1 [00:01<00:00, 1.02s/it]
pillow-7.1.2 | 656 KB | : 100% 1.0/1 [00:00<00:00, 4.63it/s]
boost-1.70.0 | 337 KB | : 100% 1.0/1 [00:00<00:00, 6.39it/s]
libcblas-3.8.0 | 10 KB | : 100% 1.0/1 [00:00<00:00, 31.69it/s]
pyarrow-0.15.0 | 3.2 MB | : 100% 1.0/1 [00:00<00:00, 1.09it/s]
xorg-xextproto-7.3.0 | 27 KB | : 100% 1.0/1 [00:00<00:00, 26.45it/s]
cloudpickle-1.4.1 | 24 KB | : 100% 1.0/1 [00:00<00:00, 22.54it/s]
libcudf-0.13.0 | 136.5 MB | : 100% 1.0/1 [00:42<00:00, 42.56s/it]
libssh2-1.9.0 | 298 KB | : 100% 1.0/1 [00:00<00:00, 7.11it/s]
openjpeg-2.3.1 | 475 KB | : 100% 1.0/1 [00:00<00:00, 9.97it/s]
pcre-8.44 | 261 KB | : 100% 1.0/1 [00:00<00:00, 12.88it/s]
pytz-2020.1 | 227 KB | : 100% 1.0/1 [00:00<00:00, 4.81it/s]
poppler-data-0.4.9 | 3.4 MB | : 100% 1.0/1 [00:00<00:00, 1.48it/s]
libxcb-1.13 | 396 KB | : 100% 1.0/1 [00:00<00:00, 6.35it/s]
python-dateutil-2.8. | 220 KB | : 100% 1.0/1 [00:00<00:00, 15.97it/s]
freetype-2.10.2 | 905 KB | : 100% 1.0/1 [00:00<00:00, 5.63it/s]
sortedcontainers-2.1 | 25 KB | : 100% 1.0/1 [00:00<00:00, 16.48it/s]
xorg-kbproto-1.0.7 | 26 KB | : 100% 1.0/1 [00:00<00:00, 30.79it/s]
libprotobuf-3.8.0 | 4.7 MB | : 100% 1.0/1 [00:00<00:00, 1.06it/s]
bokeh-2.0.1 | 6.8 MB | : 100% 1.0/1 [00:02<00:00, 2.04s/it]
zict-2.0.0 | 10 KB | : 100% 1.0/1 [00:00<00:00, 26.08it/s]
liblapack-3.8.0 | 10 KB | : 100% 1.0/1 [00:00<00:00, 24.75it/s]
ucx-py-0.13.0+g9d06c | 287 KB | : 100% 1.0/1 [00:02<00:00, 2.31s/it]
pthread-stubs-0.4 | 5 KB | : 100% 1.0/1 [00:00<00:00, 27.09it/s]
glog-0.4.0 | 104 KB | : 100% 1.0/1 [00:00<00:00, 23.01it/s]
xorg-libsm-1.2.3 | 25 KB | : 100% 1.0/1 [00:00<00:00, 29.52it/s]
libtiff-4.1.0 | 595 KB | : 100% 1.0/1 [00:00<00:00, 7.61it/s]
blinker-1.4 | 13 KB | : 100% 1.0/1 [00:00<00:00, 33.27it/s]
libcurl-7.69.1 | 573 KB | : 100% 1.0/1 [00:00<00:00, 8.13it/s]
immutables-0.14 | 68 KB | : 100% 1.0/1 [00:00<00:00, 23.39it/s]
xorg-libxdmcp-1.1.3 | 18 KB | : 100% 1.0/1 [00:00<00:00, 31.39it/s]
threadpoolctl-2.0.0 | 14 KB | : 100% 1.0/1 [00:00<00:00, 30.28it/s]
gettext-0.19.8.1 | 3.6 MB | : 100% 1.0/1 [00:01<00:00, 1.13s/it]
libhwloc-2.1.0 | 2.7 MB | : 100% 1.0/1 [00:01<00:00, 1.32s/it]
json-c-0.13.1 | 76 KB | : 100% 1.0/1 [00:00<00:00, 18.75it/s]
fastavro-0.23.4 | 415 KB | : 100% 1.0/1 [00:00<00:00, 7.05s/it]
click-7.1.2 | 64 KB | : 100% 1.0/1 [00:00<00:00, 17.55it/s]
zstd-1.4.3 | 935 KB | : 100% 1.0/1 [00:00<00:00, 1.65it/s]
typing_extensions-3. | 25 KB | : 100% 1.0/1 [00:00<00:00, 32.04it/s]
cfitsio-3.470 | 1.3 MB | : 100% 1.0/1 [00:00<00:00, 3.93it/s]
contextvars-2.4 | 11 KB | : 100% 1.0/1 [00:00<00:00, 29.58it/s]
gflags-2.2.2 | 175 KB | : 100% 1.0/1 [00:00<00:00, 13.34it/s]
fsspec-0.6.3 | 48 KB | : 100% 1.0/1 [00:00<00:00, 21.92it/s]
gcsfs-0.6.2 | 19 KB | : 100% 1.0/1 [00:00<00:00, 31.95it/s]
libgfortran-ng-7.5.0 | 1.7 MB | : 100% 1.0/1 [00:00<00:00, 3.28it/s]
dask-core-2.17.0 | 612 KB | : 100% 1.0/1 [00:00<00:00, 4.25it/s]
hdf4-4.2.13 | 964 KB | : 100% 1.0/1 [00:00<00:00, 4.91it/s]
tblib-1.6.0 | 14 KB | : 100% 1.0/1 [00:00<00:00, 30.25it/s]
distributed-2.17.0 | 1.0 MB | : 100% 1.0/1 [00:00<00:00, 2.88it/s]
expat-2.2.9 | 191 KB | : 100% 1.0/1 [00:00<00:00, 16.37it/s]
libpng-1.6.37 | 308 KB | : 100% 1.0/1 [00:00<00:00, 12.11it/s]
cryptography-2.9.2 | 613 KB | : 100% 1.0/1 [00:00<00:00, 4.56it/s]
dask-cudf-0.13.0 | 76 KB | : 100% 1.0/1 [00:01<00:00, 1.83s/it]
jinja2-2.11.2 | 93 KB | : 100% 1.0/1 [00:00<00:00, 19.50it/s]
libevent-2.1.10 | 1.3 MB | : 100% 1.0/1 [00:00<00:00, 2.50it/s]
requests-oauthlib-1. | 19 KB | : 100% 1.0/1 [00:00<00:00, 18.73it/s]
oauthlib-3.0.1 | 82 KB | : 100% 1.0/1 [00:00<00:00, 15.74it/s]
icu-64.2 | 12.6 MB | : 100% 1.0/1 [00:02<00:00, 2.05s/it]
cytoolz-0.10.1 | 431 KB | : 100% 1.0/1 [00:00<00:00, 8.03it/s]
libnvstrings-0.13.0 | 29.6 MB | : 100% 1.0/1 [00:10<00:00, 10.84s/it]
xorg-libxext-1.3.4 | 51 KB | : 100% 1.0/1 [00:00<00:00, 26.94it/s]
libiconv-1.15 | 2.0 MB | : 100% 1.0/1 [00:00<00:00, 3.59it/s]
libxml2-2.9.10 | 1.3 MB | : 100% 1.0/1 [00:00<00:00, 2.68it/s]
double-conversion-3. | 85 KB | : 100% 1.0/1 [00:00<00:00, 19.96it/s]
xorg-libxau-1.0.9 | 13 KB | : 100% 1.0/1 [00:00<00:00, 32.17it/s]
rmm-0.13.0 | 687 KB | : 100% 1.0/1 [00:03<00:00, 3.50s/it]
pixman-0.38.0 | 594 KB | : 100% 1.0/1 [00:00<00:00, 8.34it/s]
xorg-libxrender-0.9. | 31 KB | : 100% 1.0/1 [00:00<00:00, 22.38it/s]
requests-2.23.0 | 47 KB | : 100% 1.0/1 [00:00<00:00, 20.29it/s]
cudatoolkit-10.0.130 | 380.0 MB | : 100% 1.0/1 [01:17<00:00, 77.36s/it]
xorg-xproto-7.0.31 | 72 KB | : 100% 1.0/1 [00:00<00:00, 13.10it/s]
libuuid-2.32.1 | 26 KB | : 100% 1.0/1 [00:00<00:00, 30.63it/s]
ucx-1.7.0+g9d06c3a | 8.2 MB | : 100% 1.0/1 [00:05<00:00, 5.53s/it]
partd-1.1.0 | 17 KB | : 100% 1.0/1 [00:00<00:00, 26.90it/s]
brotlipy-0.7.0 | 346 KB | : 100% 1.0/1 [00:00<00:00, 10.43it/s]
tornado-6.0.4 | 639 KB | : 100% 1.0/1 [00:00<00:00, 4.73it/s]
proj-7.0.0 | 3.7 MB | : 100% 1.0/1 [00:00<00:00, 1.18it/s]
toolz-0.10.0 | 46 KB | : 100% 1.0/1 [00:00<00:00, 18.25it/s]
dlpack-0.2 | 13 KB | : 100% 1.0/1 [00:00<00:00, 2.48it/s]
librmm-0.13.0 | 70 KB | : 100% 1.0/1 [00:01<00:00, 1.56s/it]
postgresql-12.2 | 5.0 MB | : 100% 1.0/1 [00:00<00:00, 1.12it/s]
xgboost-1.0.2dev.rap | 12 KB | : 100% 1.0/1 [00:00<00:00, 1.65it/s]
cudnn-7.6.0 | 216.6 MB | : 100% 1.0/1 [00:43<00:00, 43.99s/it]
markupsafe-1.1.1 | 26 KB | : 100% 1.0/1 [00:00<00:00, 22.16it/s]
psutil-5.7.0 | 324 KB | : 100% 1.0/1 [00:00<00:00, 8.88it/s]
gdal-2.4.4 | 1.2 MB | : 100% 1.0/1 [00:00<00:00, 3.55it/s]
tzcode-2020a | 425 KB | : 100% 1.0/1 [00:00<00:00, 2.70it/s]
cupy-7.4.0 | 14.7 MB | : 100% 1.0/1 [00:04<00:00, 4.70s/it]
fontconfig-2.13.1 | 340 KB | : 100% 1.0/1 [00:00<00:00, 9.96it/s]
dask-2.17.0 | 4 KB | : 100% 1.0/1 [00:00<00:00, 35.17it/s]
c-ares-1.15.0 | 100 KB | : 100% 1.0/1 [00:00<00:00, 20.38it/s]
cuspatial-0.13.0 | 1.7 MB | : 100% 1.0/1 [00:04<00:00, 4.12s/it]
google-auth-1.14.3 | 54 KB | : 100% 1.0/1 [00:00<00:00, 16.20it/s]
libopenblas-0.3.7 | 7.6 MB | : 100% 1.0/1 [00:01<00:00, 1.41s/it]
cairo-1.16.0 | 1.5 MB | : 100% 1.0/1 [00:00<00:00, 3.10it/s]
xerces-c-3.2.2 | 1.7 MB | : 100% 1.0/1 [00:00<00:00, 1.99it/s]
fastrlock-0.4 | 32 KB | : 100% 1.0/1 [00:00<00:00, 2.88it/s]
snappy-1.1.8 | 39 KB | : 100% 1.0/1 [00:00<00:00, 24.76it/s]
pyasn1-modules-0.2.7 | 60 KB | : 100% 1.0/1 [00:00<00:00, 13.80it/s]
cusignal-0.13.0 | 67 KB | : 100% 1.0/1 [00:00<00:00, 1.48it/s]
pyasn1-0.4.8 | 53 KB | : 100% 1.0/1 [00:00<00:00, 13.59it/s]
libcugraph-0.13.0 | 40.0 MB | : 100% 1.0/1 [00:10<00:00, 38.07s/it]
thrift-cpp-0.12.0 | 2.4 MB | : 100% 1.0/1 [00:00<00:00, 2.02it/s]
urllib3-1.25.9 | 92 KB | : 100% 1.0/1 [00:00<00:00, 17.24it/s]
msgpack-python-1.0.0 | 91 KB | : 100% 1.0/1 [00:00<00:00, 20.52it/s]
google-auth-oauthlib | 18 KB | : 100% 1.0/1 [00:00<00:00, 20.35it/s]
libllvm8-8.0.1 | 23.2 MB | : 100% 1.0/1 [00:03<00:00, 3.82s/it]
heapdict-1.0.1 | 7 KB | : 100% 1.0/1 [00:00<00:00, 33.14it/s]
pyjwt-1.7.1 | 17 KB | : 100% 1.0/1 [00:00<00:00, 26.96it/s]
poppler-0.67.0 | 8.9 MB | : 100% 1.0/1 [00:01<00:00, 1.46s/it]
Preparing transaction: done
Verifying transaction: done
Executing transaction: done
Copying shared object files to /usr/lib
Copying RAPIDS compatible xgboost
Your Google Colab instance has RAPIDS installed!
Let us check on those pyarrow and cffi versions...
unloaded pyarrow 0.14.1
unloaded pyarrow 0.14.1
unloaded pyarrow 0.14.1
unloaded pyarrow 0.14.1
unloaded pyarrow 0.14.1
unloaded pyarrow 0.14.1
unloaded pyarrow 0.14.1
unloaded pyarrow 0.14.1
unloaded pyarrow 0.14.1
unloaded pyarrow 0.14.1
unloaded pyarrow 0.14.1
unloaded pyarrow 0.14.1
loaded pyarrow 0.15.0
You're now running pyarrow 0.15.0 and are good to go!
unloaded cffi 1.14.0
loaded cffi 1.11.5
All looks good however...
import cudf
import io, requests
# download CSV file from GitHub
url="https://github.com/plotly/datasets/raw/master/tips.csv"
content = requests.get(url).content.decode('utf-8')
# read CSV from memory
tips_df = cudf.read_csv(io.StringIO(content))
tips_df['tip_percentage'] = tips_df['tip']/tips_df['total_bill']*100
# display average tip by dining party size
print(tips_df.groupby('size').tip_percentage.mean())
ImportError Traceback (most recent call last)
in ()
----> 1 import cudf
2 import io, requests
3
4 # download CSV file from GitHub
5 url="https://github.com/plotly/datasets/raw/master/tips.csv"3 frames
/usr/local/lib/python3.6/site-packages/cudf/init.py in ()
5 import rmm
6
----> 7 from cudf import core, datasets
8 from cudf._version import get_versions
9 from cudf.core import DataFrame, Index, MultiIndex, Series, from_pandas, merge/usr/local/lib/python3.6/site-packages/cudf/core/init.py in ()
3 from cudf.core import buffer, column
4 from cudf.core.buffer import Buffer
----> 5 from cudf.core.dataframe import DataFrame, from_pandas, merge
6 from cudf.core.index import (
7 CategoricalIndex,/usr/local/lib/python3.6/site-packages/cudf/core/dataframe.py in ()
41 from cudf.core.series import Series
42 from cudf.core.window import Rolling
---> 43 from cudf.utils import applyutils, ioutils, queryutils, utils
44 from cudf.utils.docutils import copy_docstring
45 from cudf.utils.dtypes import (/usr/local/lib/python3.6/site-packages/cudf/utils/applyutils.py in ()
4
5 import cupy
----> 6 from numba import cuda, six
7 from numba.utils import exec_, pysignature
8ImportError: cannot import name 'six'
Any recommendations?
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.