Thanks for the library. I bought a sensor and was using it yesterday. I believe however that there is an issue in returning the distance.

I think the mask for distance should be:

define AS3935_DISTANCE 0x07, 0x3F

instead of the present

define AS3935_DISTANCE 0x07, 0x1F

From the AS3935 spec sheet:
DISTANCE [5:0] R 000000 Distance estimation

The 1F mask only allows 5 bits instead of 6, so distances returned would always be less than 32km instead of the 63km range of the chip.

Let me know if I am correct about this.

Thanks,
Frank

Hi,

thank you for developping this library. I have successfully connect the tautic AS3935 mini board to the arduino with it.

But when i want to use ethernet functions with an Ethernet board, i met some issues, like the impossbility to send requests to a server.

the ethernetClient.connect(server, port) method doesn't works.

I think it is because there is something common between your library an Ethernet Library. But i don't know what.

Can you help me please ?

Thank you very much.

Best regards

I have installed the default code, and commented out the specified line because I am running an Arduino 256. Every time I start this up, I get:

Noise floor is: 2
Spike rejection is: 2
Watchdog threshold is: 2
Noise level too high, try adjusting noise floor
...

I have verified my connections and power cycled. Any thoughts?