projectsaturnstudios / weedo-x40

My work for the Weedo X40 IDEX 3D printer

Weedo-X40

My work for the Weedo X40 IDEX 3D printer

Youtube Review (german)

Watch and Like my Video on YouTube. Even if you don't understand German, YouTube will give me some Cents for your click.

PrusaSlicer Profile

While PrusaSlicer 2.4 includes PaintOn MultiMaterial, it is the optimal Slicer for the Weedo X40. Therefor I tried to create Profiles that will run with the default firmware. The released profiles are for:

• Single Nozzle Print
  Use the left Extruder to make a single print. The options to select Mirror or Duplication via the screen on the printer are not available.

• Dual Nozzle Print
  Use both Extruder to make a single print. Use a wipe tower to prime each nozzle before it will print. Use Purging Volumes on the right and set it to 30mm² in the advanced section, if that is not included in the profile.

• Double Nozzle Print
  Because the selection is not available from the print screen, you can directly slice the object for that mode. You can also only see half of the print bed.

RepRap conversion

Follow me along how I turned the X40 into a Printer using RepRap Firmware. --> Go to RRF

Donations

If you like, you can let Amazon pay some donations to me by using this affiliate link for your next pruchases on Amazon Germany: https://amzn.to/3cwmAMx