profiscience / knockout-contrib Goto Github PK
View Code? Open in Web Editor NEW:metal: KnockoutJS Goodies Monorepo
License: Do What The F*ck You Want To Public License
:metal: KnockoutJS Goodies Monorepo
License: Do What The F*ck You Want To Public License
First of all, thanks for your great work!
I have an application which consist of a navbar and a component, i.e.
<navbar />
<div class="container">
<router />
</div>
However, on my login page I don't want the navbar and the div.
My solution:
<!-- ko if: authorized -->
<navbar />
<!-- /ko -->
<div id="container">
<router />
</div>
where I add and remove class container to page depending of authorized (which, of course is an observable). This works most of them time except for when you get logged out without page refresh. What I ideally want is:
<!-- ko if: authorized -->
<navbar />..<router />
<!-- /ko -->
<!-- ko ifnot: authorized -->
<router />
<!-- /ko -->
but since only one instance of <router>
is allowed, this is not possible. Of course I could just put the navbar in the components, but it's not their responsibility.
Would you happen to have any (better) suggestions for this?
Best :)
Package(s)
Describe the bug
I'm not sure if this is intended behavior after the latest update to rc9 or not. I did notice this commit: 6c06eb3.
When on a route, say /customers/23/info and then there is some action on that route Router.update(//customers/56/info);
, no errors are thrown and it stays on the original route.
Expected behavior
I'd expect the router to update to the the latest route specified with Router.update
. Fwiw, this was working prior to rc9 ( I was on rc8 before this, I even rolled back to verify ). The workaround is to currently pass { force: true }
.
Desktop (please complete the following information):
Additional context
Again I'm not sure if this is now the intended behavior or not now. Any insight would be greatly appreciated.
1.7.0
to 1.8.0
.This version is covered by your current version range and after updating it in your project the build failed.
pretty-quick is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
10.11.4
to 10.11.5
.This version is covered by your current version range and after updating it in your project the build failed.
@types/node is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
🚨 You need to enable Continuous Integration on all branches of this repository. 🚨
To enable Greenkeeper, you need to make sure that a commit status is reported on all branches. This is required by Greenkeeper because it uses your CI build statuses to figure out when to notify you about breaking changes.
Since we didn’t receive a CI status on the greenkeeper/initial
branch, it’s possible that you don’t have CI set up yet. We recommend using Travis CI, but Greenkeeper will work with every other CI service as well.
If you have already set up a CI for this repository, you might need to check how it’s configured. Make sure it is set to run on all new branches. If you don’t want it to run on absolutely every branch, you can whitelist branches starting with greenkeeper/
.
Once you have installed and configured CI on this repository correctly, you’ll need to re-trigger Greenkeeper’s initial pull request. To do this, please delete the greenkeeper/initial
branch in this repository, and then remove and re-add this repository to the Greenkeeper App’s white list on Github. You'll find this list on your repo or organization’s settings page, under Installed GitHub Apps.
This is a feature suggestion for Router.
I. e. having route structure.
|-- /page1
|-- /page2
|--- /
|--- /tab2
In order to create a menu for top level paths there is a need to have a bindings "path" and "activePath" that would also match child routes. Current implementation of "activePath" matches full path only, binding doesnt add active path class to "/page2" anchor when current path is "/page2/tab2". This could be an option for an existing binding handlers (both "path" and "activePath"), i.e. <a data-bind="path: '/page2', matchChildrenAsActive: true">page2</a>
1.1.0
to 1.1.1
.This version is covered by your current version range and after updating it in your project the build failed.
husky is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
The new version differs by 8 commits.
09bbaa3
1.1.1
86379ab
Update CHANGELOG.md
f588dac
Update CHANGELOG.md
dd57ab7
Check Node version before running hook
821d88d
Update CHANGELOG.md
c6b9925
Merge branch 'master' of https://github.com/typicode/husky
1406071
Check HUSKY_SKIP_INSTALL value before other checks
cb9a517
Update BACKERS.md
See the full diff
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
23.1.4
to 23.10.0
.This version is covered by your current version range and after updating it in your project the build failed.
ts-jest is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
ts-jest
, reloaded!ts-jest
Slack community where you can find some instant helpjest
, typescript
and babel
versionsThe new version differs by 293 commits.
0e5ffed
chore(release): 23.10.0
3665609
Merge pull request #734 from huafu/appveyor-optimizations
45d44d1
Merge branch 'master' into appveyor-optimizations
76e2fe5
ci(appveyor): cache npm versions as well
191c464
ci(appveyor): try to improve appveyor's config
0f31b42
Merge pull request #733 from huafu/fix-test-snap
661853a
Merge branch 'master' into fix-test-snap
aa7458a
Merge pull request #731 from kulshekhar/dependabot/npm_and_yarn/tslint-plugin-prettier-2.0.0
70775f1
ci(lint): run lint scripts in series instead of parallel
a18e919
style(fix): exclude package.json from tslint rules
011b580
test(config): stop using snapshots for pkg versions
7e5a3a1
build(deps-dev): bump tslint-plugin-prettier from 1.3.0 to 2.0.0
fbe90a9
Merge pull request #730 from kulshekhar/dependabot/npm_and_yarn/@types/node-10.10.1
a88456e
build(deps-dev): bump @types/node from 10.9.4 to 10.10.1
54fd239
Merge pull request #729 from kulshekhar/dependabot/npm_and_yarn/prettier-1.14.3
There are 250 commits in total.
See the full diff
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
3.4.3
to 3.5.0
.This version is covered by your current version range and after updating it in your project the build failed.
lerna is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
The new version differs by 48 commits.
1c142db
chore(release): publish v3.5.0
fbf9629
refactor(version): Tweak error code when remote branch does not exist
b199f32
refactor(publish): Allow --git-reset to be configured from lerna.json
3b98973
refactor(publish): Gather current tags filtered by --list glob
1aa1712
chore: bump eslint-plugin-jest
f4edc76
docs: Remove broken badges
bc56839
chore: sync protocol of public registry
1a78f1a
chore: reset lockfile
3cb7465
fix(publish): Ignore non-release tags when detecting from-git
(#1782)
7ee05d7
feat(version): Add --include-merged-tags
option (#1712)
e2c0342
docs: Fix link to --git-remote
option (#1796) [ci skip]
eae5619
feat(publish): Add option --no-git-reset
to leave unstaged changes in working tree (#1791)
b69a728
feat(run): Log package name and timing in runScriptInPackageCapturing (#1781)
9d36654
feat(import) Add --dest
option to explicitly specify import destination (#1772)
cd34b48
fix(version): Add friendly error message when remote branch doesn't exist (#1741)
There are 48 commits in total.
See the full diff
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
🚨 You need to enable Continuous Integration on all branches of this repository. 🚨
To enable Greenkeeper, you need to make sure that a commit status is reported on all branches. This is required by Greenkeeper because it uses your CI build statuses to figure out when to notify you about breaking changes.
Since we didn’t receive a CI status on the greenkeeper/initial
branch, it’s possible that you don’t have CI set up yet. We recommend using Travis CI, but Greenkeeper will work with every other CI service as well.
If you have already set up a CI for this repository, you might need to check how it’s configured. Make sure it is set to run on all new branches. If you don’t want it to run on absolutely every branch, you can whitelist branches starting with greenkeeper/
.
Once you have installed and configured CI on this repository correctly, you’ll need to re-trigger Greenkeeper’s initial pull request. To do this, please delete the greenkeeper/initial
branch in this repository, and then remove and re-add this repository to the Greenkeeper App’s white list on Github. You'll find this list on your repo or organization’s settings page, under Installed GitHub Apps.
10.12.6
to 10.12.7
.This version is covered by your current version range and after updating it in your project the build failed.
@types/node is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
23.3.2
to 23.3.3
.This version is covered by your current version range and after updating it in your project the build failed.
@types/jest is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
10.10.1
to 10.10.2
.This version is covered by your current version range and after updating it in your project the build failed.
@types/node is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
1.7.4
to 1.7.5
.This version is covered by your current version range and after updating it in your project the build failed.
jest-fetch-mock is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
1.15.2
to 1.15.3
.This version is covered by your current version range and after updating it in your project the build failed.
prettier is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
23.3.3
to 23.3.4
.This version is covered by your current version range and after updating it in your project the build failed.
@types/jest is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
When installing @profiscience/knockout-contrib-router-plugins-title
, I am given the following warning:
warning "@profiscience/[email protected]" has incorrect peer dependency "@profiscience/knockout-contrib-router@^2.0.0-4".
My package.json is as follows:
{
"version": "1.0.0",
"name": "asp.net",
"dependencies": {
"@profiscience/knockout-contrib-router": "^1.2.0",
"@profiscience/knockout-contrib-router-plugins-title": "^1.0.0-alpha.7"
...
},
"devDependencies": {
...
},
"scripts": {
...
}
}
Why is this happening?
1.1.3
to 1.1.4
.This version is covered by your current version range and after updating it in your project the build failed.
husky is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
The new version differs by 9 commits.
4a9814c
1.1.4
9df8d08
Update CHANGELOG.md
58965b4
Refactor
d32682c
Update README.md
3170033
source file (#397)
209a6ea
Update CHANGELOG.md
da4d9d2
Upgrade execa to 1.0 (#393)
79e1dd9
Update README.md
f3a923d
Update README.md
See the full diff
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
Hi,
I would like to try out the new version of the router but I'm not being able to run the examples.
They are in Typescript and I can't find how I'm supposed to transpile it to run them.
Thanks in advance!
23.3.9
to 23.3.10
.This version is covered by your current version range and after updating it in your project the build failed.
@types/jest is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
Using this plugin and navigating through routes sometimes I get warning in console:
[@profiscience/knockout-contrib-router-plugins-component] Unable to
new
viewModel. This may cause unexpected behavior.
Is there a way to disable it? Or is it that I am doing something wrong that I get this warning?
Would you be interested in contributing some of this to tko / ko4?
23.10.4
to 23.10.5
.This version is covered by your current version range and after updating it in your project the build failed.
ts-jest is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
The new version differs by 48 commits.
8cd933b
Merge pull request #874 from kulshekhar/release/23.10.5
8742886
chore(release): 23.10.5
1892e1b
build(deps-dev): bump @types/babel__core from 7.0.1 to 7.0.2 (#872)
10ff3fd
build(deps-dev): bump @types/node from 10.12.0 to 10.12.10 (#883)
0445500
More safely resolve 'jest-config'. (#853)
87ef5b8
Merge pull request #862 from huafu/upgrade-packages
0150319
build(packages): upgrade bs-logger
794b2f2
build(packages): updates e2e test cases dependencies
d325bce
build(packages): re-lock semver version above wanted
0abd4d4
build(packages): upgrades external dependencies
04a5ebf
Fix security vulnerability (#850)
89269d5
Fix wrong value in package.json example (#849)
0a59b42
Merge pull request #848 from orta/patch-1
9162ebb
Update README.md
44948c3
build(deps-dev): bump tslint-plugin-prettier from 2.0.0 to 2.0.1 (#832)
There are 48 commits in total.
See the full diff
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
3.4.0
to 3.4.1
.This version is covered by your current version range and after updating it in your project the build failed.
lerna is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
The new version differs by 10 commits.
05a27a6
chore(release): publish v3.4.1
f7fdc77
fix(publish): Overwrite Yarn registry proxy when encountered
06a9479
fix(publish): Set token on npm config, allow third-party registries to remain non-compliant
987fd26
fix(bootstrap): Constrain npm-conf argument object to options.registry only
597606c
fix(add): Allow --registry option
25af71d
fix(npm-conf): Do not overwrite defaults with undefined cli keys
159a0b0
fix(conventional-commits): Upgrade angular preset, ensure header is not duplicated
9752f3e
fix(conventional-commits): Upgrade dependencies
a60a0c3
docs: Add 'lerna create' command to README.md (#1680)
265ec0c
docs(readme): update independent mode instructions (#1701)
See the full diff
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
3.3.6
to 3.3.7
.This version is covered by your current version range and after updating it in your project the build failed.
@types/jquery is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
1.15.0
to 1.16.0
.This version is covered by your current version range and after updating it in your project the build failed.
tslint-config-prettier is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
The new version differs by 30 commits.
ca35700
Merge pull request #210 from ikatyang/feat/tslint-react/jsx-space-before-trailing-slash
c9b0900
chore(deps-dev): bump tslint from 5.9.1 to 5.11.0 (#207)
26cc41c
feat(rules): add tslint-react/jsx-space-before-trailing-slash
9ffef95
chore(deps-dev): bump tslint-react from 3.5.1 to 3.6.0 (#205)
9d6a542
docs: update repo url and remove unnecessary devDependency (#209)
f5c9451
chore(deps-dev): bump ts-jest from 23.10.0 to 23.10.4 (#203)
3b06abd
chore(deps-dev): bump @types/make-dir from 1.0.1 to 1.0.3 (#204)
6b7b9aa
chore(deps-dev): bump @types/prettier from 1.10.0 to 1.13.2 (#206)
6514ef4
chore(deps-dev): [security] bump lodash from 4.17.4 to 4.17.11 (#208)
58a3112
chore(package): update prettier to version 1.15.2 (#202)
c07f05a
docs(readme): Proper case for TSLint & Prettier (#201)
647fafe
chore(package): update prettier to version 1.15.1 (#200)
fa14fb3
chore(package): update prettier to version 1.15.0 (#199)
28d8e8b
chore(package): update tslint-consistent-codestyle to version 1.14.1 (#198)
cb4371e
chore(package): update tslint-immutable to version 4.9.1 (#197)
There are 30 commits in total.
See the full diff
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
When following config is provided to a Route class, ComponentViewModel instance is created before promises queued on Context are finished. Results in error in VM constructor if trying to access properties of the Context that would have been set by a callback from a promise.
component: { viewModel: ComponentViewModel, template: template }
🚨 You need to enable Continuous Integration on all branches of this repository. 🚨
To enable Greenkeeper, you need to make sure that a commit status is reported on all branches. This is required by Greenkeeper because it uses your CI build statuses to figure out when to notify you about breaking changes.
Since we didn’t receive a CI status on the greenkeeper/initial
branch, it’s possible that you don’t have CI set up yet. We recommend using Travis CI, but Greenkeeper will work with every other CI service as well.
If you have already set up a CI for this repository, you might need to check how it’s configured. Make sure it is set to run on all new branches. If you don’t want it to run on absolutely every branch, you can whitelist branches starting with greenkeeper/
.
Once you have installed and configured CI on this repository correctly, you’ll need to re-trigger Greenkeeper’s initial pull request. To do this, please delete the greenkeeper/initial
branch in this repository, and then remove and re-add this repository to the Greenkeeper integration’s white list on Github. You'll find this list on your repo or organization’s settings page, under Installed GitHub Apps.
1.1.1
to 1.1.2
.This version is covered by your current version range and after updating it in your project the build failed.
husky is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
The new version differs by 9 commits.
05f57f2
1.1.2
bbacc43
Update CHANGELOG.md
89efe65
Check that HUSKY_DEBUG equals "true"
0177900
Update CHANGELOG.md
ab4a28e
Fix "[[: not found"
2c98004
Update package-lock.json
74149bc
Update debug message
528c52a
Add HUSKY_DEBUG=true to .travis.ym
39678b3
Print debug message at hook start (#377)
See the full diff
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
I've been trying to get your lazy loading solution working for a large project I'm working on and have come across a few problems. The project currently uses history and crossroads for routing, and the main route defined at the app-root component is as follows:
const routes: Route[] = [
{ url: `${Global.AppRoot + Global.AppRouterRoot}/{schema}/:location:/:component:/:id:/` }
];
Would it be possible to use this route with this knockout router and navigate to the dynamic component that is specified in the URL?
If I am to follow the lazy loading example exactly, it would mean me having to specify the exact names of the components per route, instead of them being dynamically registered. This would mean me needing to write a lot of repeated code for a large project. I understand that the plugin included in the example you've provided can be extended but I can't see a way for me to access the route's URL directly to pull out the component name from it.
I'm obviously a newbie to this router, so any info or guidance is much appreciated.
Jamie
10.11.3
to 10.11.4
.This version is covered by your current version range and after updating it in your project the build failed.
@types/node is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
Hi,
I was trying to include this library in a typescript project, but maybe I'm missing something in my tsconfig.json because it starts to check source code in this module inside node_modules even excluding "node_modules". maybe is a noobie question about typescript, or it can be done something to improve here, because it tries to check ts files under node_modules/@profiscience/knockout-contrib-* using my tsconfig.json.
I'm using webpack and awesome-typescript-loader, maybe is required to do something here?
3.3.11
to 3.3.12
.This version is covered by your current version range and after updating it in your project the build failed.
@types/jquery is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
23.10.0
to 23.10.1
.This version is covered by your current version range and after updating it in your project the build failed.
ts-jest is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
The new version differs by 13 commits.
d9c5b45
Merge pull request #743 from huafu/release/23.10.1
e4a3a09
chore(release): 23.10.1
ab94359
Merge pull request #742 from huafu/fix-740-no-js-compilation-with-allow-js
a844fd4
Merge branch 'master' into fix-740-no-js-compilation-with-allow-js
18dced1
Merge pull request #741 from huafu/e2e-weird-deep-paths
9e7d6a0
test(config): adds test related to allowJs
374dca1
fix(compile): js files were never transpiled thru TS
70fd9af
ci(cache): removes some paths from the caching
c12dfff
fix(windows): normalize paths
0141098
test(e2e): deep paths and coverage
6ccbff3
Merge pull request #736 from huafu/detect-import-and-throw-if-none
a2a4be2
fix(config): warn instead of forcing ESM interoperability
21644da
Merge pull request #735 from huafu/master
See the full diff
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
23.10.1
to 23.10.2
.This version is covered by your current version range and after updating it in your project the build failed.
ts-jest is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
The new version differs by 44 commits.
13cb48d
Merge pull request #764 from huafu/release/23.10.2
aa3e5f7
chore(release): 23.10.2
9db3337
Merge pull request #763 from huafu/wrong-error-if-import-fails
e0d6c57
fix(import): wrong error message when a module exists but fails
e765875
Merge pull request #757 from huafu/testMatch-and-testRegex
a4bbdcd
docs(preset): typos
ddc2f79
docs(preset): usage of all presets + note about testMatch
6985e07
Merge branch 'testMatch-and-testRegex' of github.com:huafu/ts-jest into testMatch-and-testRegex
6a72a87
test(cli): test migrate preset detection
febd8d3
feat(cli): CLI 'config:migrate' now detects best preset
f55d895
feat(preset): adds presets typings and export all presets
e409653
Merge branch 'master' into testMatch-and-testRegex
0534889
Merge pull request #759 from kulshekhar/dependabot/npm_and_yarn/@types/node-10.11.0
e23e0be
build(deps-dev): bump @types/node from 10.10.3 to 10.11.0
7890162
Merge branch 'master' into testMatch-and-testRegex
There are 44 commits in total.
See the full diff
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
3.4.1
to 3.4.2
.This version is covered by your current version range and after updating it in your project the build failed.
lerna is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
The new version differs by 6 commits.
6afcde7
chore(release): publish v3.4.2
bef9a83
chore: bump transitive dependencies
3d68d87
chore: bump dev dependencies
a89ae62
fix(publish): Prevent retries during access validation so third-party registries are skipped faster
7ba41a6
fix(publish): Use modern auth resolution
ef47f2a
docs(version): document the —yes option (#1715)
See the full diff
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
3.1.1
to 3.1.2
.This version is covered by your current version range and after updating it in your project the build failed.
karma is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
The new version differs by 11 commits.
7d4d347
chore: release v3.1.2
5077c18
chore: update contributors
fb05fb1
fix(server): use flatted for json.stringify (#3220)
2682bff
feat(docs): callout the key debug strategies. (#3219)
4e87902
fix(changelog): remove release which does not exist (#3214)
30ff73b
fix(browser): report errors to console during singleRun=false (#3209)
5334d1a
fix(file-list): do not preprocess up-to-date files (#3196)
dc5f5de
fix(deps): upgrade sinon-chai 2.x -> 3.x (#3207)
d38f344
fix(package): bump lodash version (#3203)
ffb41f9
refactor(browser): log state transitions in debug (#3202)
240209f
fix(dep): Bump useragent to fix HeadlessChrome version (#3201)
See the full diff
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
As we had previously discussed, it would be great to be able to configure a prefix and/or suffix to be appended to all route titles.
Thanks!
23.10.3
to 23.10.4
.This version is covered by your current version range and after updating it in your project the build failed.
ts-jest is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
The new version differs by 22 commits.
ef89ee6
Merge pull request #795 from huafu/release/23.10.4
82a930b
chore(release): 23.10.4
69b80ad
Merge pull request #794 from huafu/fix-preset-typings
94dc4e7
fix(typings): wrong import in preset typings + test
53767ab
fix(typings): typo in presets definition file
90beca8
Merge pull request #787 from huafu/fix-testing-utils
89ad06a
style(cli): more readable code when setting defaults for init
b1eed98
docs(install): includes @types/jest in install script
b837acd
test(typings): repalce jest.SpyInstance with MockInstance
6cacbea
fix(cache): adds project's dep versions to cache key
7b2dd01
test(preset): fixes tests, doc and cli for presets
ec78757
docs(utils): updates docs related to moved helpers
8d5a60a
test(preset): updates tests related to presets
68abcfb
fix(cli): change options to better reflect the new presets
33ff29f
fix(helpers): deprecate import from ts-jest, now ts-jest/utils
There are 22 commits in total.
See the full diff
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
Hi Casey,
We’ve recently started migrating from ko-component-router to knockout-contrib-router and there are some things we noticed and wanted to know if they are bugs or behavior misunderstandings from our side.
I’ve created a codesandbox project where every single issue reported below can be reproduced. Here’s the demo link: https://p938k153rj.codesandbox.io/user
You can check the code at https://codesandbox.io/s/p938k153rj
From the second router level below, we are no longer able to use the path bind ./, to access child routes, we must add the hardcoded path instead, or work around it using the canonicalPath.
This is indicated in the green/red text: https://p938k153rj.codesandbox.io/user/new/details
The path binding seems to work well for the first level, but not for the second and below.
From the second router level below, when we hit the same navigation item it re-renders the child component. This doesn’t happen at the top level.
In order to test this, click on the ‘Users’ link multiple times. You will notice that the first level “rendered at X ms message” is always the same. This is the expected behavior for me: clicking on the same link doesn’t trigger a re-rendering. It also works fine for the second level ‘New’ and ‘Edit’ navigation items.
But if you click on the ‘Details’ or ‘Contact’ the child component gets re-rendered, every time you click them.
Here is a sample video of this behavior: https://www.screencast.com/t/xmgbuWLKWav
Also, I’ve noticed that the first time I click on the ‘Users’ link the browser navigates to ‘/user’. The second time I click on it, the browser navigates to ‘/user/’.
Let me just say thank you for the router. The newer version is way better and a lot cleaner.
In the router package, the default behavior of popstate is prevented, and thus the state is not updated. Therefor the history.state cannot really be used (even though it works, as far is I can see, with hashbang:true).
Are there any reason for not replacing current state with the state received from the event?
I can of course make a pull request if you are interested.
Thanks for your great work!
Anders
4.14.116
to 4.14.117
.This version is covered by your current version range and after updating it in your project the build failed.
@types/lodash is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
3.3.10
to 3.3.11
.This version is covered by your current version range and after updating it in your project the build failed.
@types/jquery is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
1.6.0
to 1.7.0
.This version is covered by your current version range and after updating it in your project the build failed.
pretty-quick is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
The new version differs by 1 commits.
230d03f
feat: --no-restage flag for skipping re-stage step in staged mode (#39) (#40)
See the full diff
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
3.3.9
to 3.3.10
.This version is covered by your current version range and after updating it in your project the build failed.
@types/jquery is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
1.14.2
to 1.14.3
.This version is covered by your current version range and after updating it in your project the build failed.
prettier is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
Hey Casey,
I'm using the Init plugin and in the documentation it is mentioned that it can be used "to declaratively initialize a viewModel before rendering."
Following the documentation I've added it to my ViewModel as follows:
import ko from "knockout";
import { Route } from "@profiscience/knockout-contrib-router";
import {
initializerPlugin,
INITIALIZED
} from "@profiscience/knockout-contrib-router-plugins-init";
import { componentPlugin } from "@profiscience/knockout-contrib-router-plugins-component";
import "regenerator-runtime/runtime";
Route.usePlugin(componentPlugin).usePlugin(initializerPlugin); // **MUST** come after component plugin
function resolveAfter2Seconds() {
return new Promise(resolve => {
setTimeout(() => {
resolve('resolved');
}, 2000);
});
}
class DataModel {
constructor() {
this[INITIALIZED] = this.init();
this.init = this.init.bind(this);
}
async init() {
console.log('calling Data Model init');
await resolveAfter2Seconds();
}
}
export default class ViewModel {
constructor(ctx) {
this.ctx = ctx;
let user = ctx.params.id
? ctx.$parent.users.find(user => user.id === parseInt(ctx.params.id))
: {};
this.user = user;
this.isInitialized = ko.observable(false);
this.data = new DataModel()
this[INITIALIZED] = this.init(ctx);
this.init = this.init.bind(this);
}
init(ctx) {
const p = new Promise((resolve, reject) => {
setTimeout(() => {
console.log('calling ViewModel init');
this.isInitialized(true);
resolve();
}, 2000);
});
return p;
}
}
When I run this code, I can see the delay between the call to the init on my DataModel and the init on my ViewModel.
Nevertheless, the component is rendered without waiting for the init methods to finish.
My expectation was that it would only render after finishing the initialization on both (DataModel and ViewModel).
Can you help me out understanding it?
Here is a sample on CodeSandBox
Thanks in advance
3.3.22
to 3.3.23
.This version is covered by your current version range and after updating it in your project the build failed.
@types/jquery is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
10.11.7
to 10.12.0
.This version is covered by your current version range and after updating it in your project the build failed.
@types/node is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.
There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.
Your Greenkeeper Bot 🌴
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.