A touch probe for various measurement applications
This is a Jubilee-compatible XYZ Probe. It can act as a replacement for the existing z-limit switch or as a general means of inspecting items on the bed. Probing gives the machine the ability to register against arbitrary features on the bed, enabling the possibility of resuming partial prints, scanning objects, or inspecting the existing dimensions of objects.
The XYZ probe can be reproduced from both printed and stock parts with a single unit costing about $50. Simply order the parts in the Shopping List and follow the step-by-step instructions.
For more information on provisioning this tool for Jubilee, have a look at its corresponding tool page.
- probe the full XY volume. Probe into pockets up to 38 [mm] deep.
- compact! Does not sacrifice any of the build volume.
- Purchased Parts called out in the Shopping List
This tool is part of the bigger ecosystem of Jubilee-compatible tools that implement the E3D Toolchanger Coupler standard. For more on Jubilee, have a look at the parent project or join the Discord.
This tool was created by Joshua Vasquez formerly at Machine Agency at the University of Washington.
This tool is licensed with a Creative Commons Attribution 4.0 Unported License.