peacedata0 / pfsense-scripts

Misc ad-hoc helper scripts for pfSense boxes

pfsense-scripts

Misc ad-hoc helper scripts for pfSense boxes.

Installation

The Right Way to install these scripts to pfSense machine is to upload them through "Filer" package, with executable bit, and setup to run through Filer's "Script/Command" option.

"Filer" package can be installed from WebUI's "System - Packages" menu.

After that, individual scripts should be uploaded through "Diagnostics - Filer" WebUI form, with the following fields set:

• File: /usr/local/etc/<script_name>
• Permissions: 0755
• File Contents: <script_contents>
• Script/Command: /usr/local/etc/<script_name> <script_args>
• Description field can be filled with anything you like.

Substitute <scriptname> and <script_contents> above with name/contents for the specific script and <script_args> with any parameters that it expects on the command line (see script descriptions below for these).

Scripts that are configurable can also have values that can be changed when copying script contents, usually at the very top.

Any scripts installed that way will be stored in the pfSense config, and can be backed-up/restored along with all the other pfSense configuration parameters (e.g. through "Diagnostics - Backup/restore" in WebUI).

Scripts

Install these via "Filer" package, as described in the "Installation" section.

iface_check_restart.sh

Script to detect when interface goes down and restart it:

Usage: iface_check_restart.sh interface_label [check_interval]

Command-line arguments:

• interface_label: interface name, same as it is set/shown in pfSense WebUI.

  For example, default wan/lan interface names in pfSense are WAN and LAN. Upper/lower case matters.

• check_interval (optional): interval between iface state checks, in seconds.

  Default: 60

Example Filer's "Script/Command" setting (for WAN interface):

/usr/local/etc/iface_check_restart.sh WAN

Runs in an endless loop, checking specified interface state every N seconds and restarting it if check fails.

Restart is done via interface_reconfigure($iface) from php, which cycles iface state down/up.

gateway_change_conn_reset.sh

Script to detect when default gateway interface changes and forcefully kill all connections still hanging throu old gateway interface:

Usage: gateway_change_conn_reset.sh [check_interval]

Command-line arguments:

• check_interval (optional): interval gateway checks, in seconds.

  Default: 60

Runs in an endless loop, getting list of interfaces (os-level, e.g. em0) for gateways marked as "defaultgw" and dumping list of these to a file in /tmp (configurable in script via PFx_STATE_FILE), checking old contents of it against this list and running /etc/rc.kill_states <iface> for interfaces that are not longer used for default gw.

Debugging

Some (or all) scripts check if PFx_DEBUG env variable is non-empty and echo some extra debug information to stderr when that's the case.

Best way to see this output would be to run the scripts manually from the shell, or with output redirection, i.e.:

% PFx_DEBUG=t /usr/local/etc/gateway_change_conn_reset.sh 5
gw_ifaces :: em1
gw_ifaces_old :: em1
gw_ifaces :: em1
gw_ifaces_old :: em1
gw_ifaces :: em0
gw_ifaces_old :: em1
rc.kill_states :: em1
gw_ifaces :: em0
gw_ifaces_old :: em0
...

For conventional output redirection via e.g. 2>/tmp/debug.log, make sure "sh" shell is being used, as tcsh has its own syntax for that:

% ps -p$$
  PID TT  STAT    TIME COMMAND
43600  0  S    0:00.01 /bin/tcsh

% sh
% ps -p$$
  PID TT  STAT    TIME COMMAND
97458  0  S    0:00.00 sh

% PFx_DEBUG=t nohup /usr/local/etc/gateway_change_conn_reset.sh 5 2>/tmp/debug.log &
% exit