painkiller3 / kernel_xiaomi_sdm845

SilverCore Kernel Poco F1 (beryllium)

SilverCore Kernel for Poco F1 (beryllium)

Device specifications

Basic	Specification
SoC	Qualcomm SDM845 Snapdragon 845
CPU	Octa-core (4x2.8 GHz Kryo 385 Gold & 4x1.8 GHz Kryo 385 Silver)
GPU	Adreno 630
Memory	6/8 GB RAM
Storage	64/128/256 GB
Battery	Non-removable Li-Po 4000 mAh battery
Display	1080 x 2246 pixels, 18:9 ratio, 6.18 inches, IPS LCD (~403 ppi density)
Camera	12 MP + 5MP, dual pixel PDAF, dual-LED (dual tone) flash
Release Date	August 2018

Features

• Always up-to-date with the latest Clo (CodeLinaro) and Linux tag.
• Compiled using aosp (Android Open Source Project) clang (a C/C++/Objective-C compiler).
• Controller support added.
• Default TCP (Transmission Control Protocol) set to BBR (Bottleneck Bandwidth and RTT).
• Enabled Power efficient workqueues.
• Klapse and sound control added.
• LZ4 compression and decompression enabled.
• Proper fast charging support based on temperature.
• Rapid GC (garbage collection) for f2fs (flash-friendly file system).
• Removed unused governors.
• Sultan's simple low memory killer.
• Check commit on git for more.

Downloads

• SilverCore Kernel For Beryllium

Telegram Channel

• Telegram Channel
• Telegram Group

kernel_xiaomi_sdm845's Issues

USB HDD Harddrive keeps disconnecting

My Harddrive gets connected and after short amount of time automatically ejected. Its connected over USB Otg, cables are fine, disk also.
In my opinion there is a driver issue, would be nice if you can fix this.

Stuck at extreme thermals.

After a while of using the kernel version 10.13, though it also happens with earlier versions, my device gets stuck on extreme thermal profile limits. Meaning 1.3Ghz for the CPU and 342Mhz for the GPU. I am not rooted on LineageOs19.1 6.18 Build but it also happened on earlier builds. A reboot clears the issue temporarily so does setting the CPU and GPU speed manually if the device is rooted. Issue remains unchanged as of version 10.15.

Add missing releases for the latest versions

Can you please add releases of the versions after the v4.4? I have precompiled kernel v5.3 and I want to compile additional drivers but I don't know which commit corresponds to that release.