🕹️ p4wnsolo-joyterm

Gets text input from OLED Joystick
Runs the command you typed
Displays output on OLED Screen

(Great for P4wnP1 - even better on Raspberry Pi Zero 2)

UPDATE Dec 23, '21:

Fixed "wrong file path" Issue in go.py
Added feature to allow Commands of unlimited length (the input now scrolls after the 12th Input character or so)

Input

Output

What is `p4wnsolo-joyterm`?

P4wnSolo-joyterm (aka joyterm) is just a few scripts I put together to enable Terminal functionality on Raspberry Pi with OLED screen (especially P4wnP1).

It is assumed that you already got your OLED screen working before trying p4wnsolo-joyterm (see SH1106 on Github).

💡 Notes

🐇 Performance (Pi0W vs Pi02)

Everything about this project runs way faster and more smoothly on Raspberry Pi Zero 2.

Nexmon hasn't been released for RPi02W, but you can still use joyterm on P4wnP1 for RPi0w or Raspberry Pi OS / Kali on RPi02.

It's entirely possible that the code I wrote for this repo is so sloppy that it's causing the joystick-press performance to suffer on RPiZeroW. I say this because BeBoXGui seems to scroll much faster than joytext.py, but joytext.py also has more "going on" in the back end I believe.

But nevertheless - joyterm runs perfectly (and FAST) on Raspberry Pi Zero 2 (see Demo video clip on Twitter 0m19s)

So for now, here's a Demo / pre-release of joyterm to get you entering commands using that little Joystick on your P4wnP1.

⚙️ Functionality

Currently, p4wnsolo-joyterm just runs a "one shot".

It runs a command and displays the output - but does not wait for more output (yet).

For example, Wifite runs just fine - but p4wnsolo-joyterm Exits when Wifite asks for input.

I'm working on making the Terminal persist while the program continues running, so you can continue adding input after the program starts.

Stay tuned for this update, which should be coming soon.

📝 Requirements:

Hardware:

Raspberry Pi
- Any model of Pi should work
- Tested successfully on RPi0W (OS: P4wnP1_ALOA) and RPi02W (OS: RaspberryPi OS)
SH1106 OLED Screen (1.3" by Waveshare)

Software:

Linux
- So far, tested on P4wnP1 ALOA (Kali) and Raspberry Pi OS (Debian)
spidev and other dependences (see command below)
luma and luma.oled
numpy
SPI must be enabled
- I use Method 3 in this RaspberryPi-spy article

Install Method 1: From BeBoxGui Image

Flash the BeBoXGui OLED Menu V2 image onto your SD card
Boot it up and run the following command to install dependencies:

pip3 install RPi.GPIO spidev numpy pillow fontawesome luma luma.oled

How to Install numpy, Luma, Luma.OLED

Tip #1: Luma.OLED takes ~10 mins to install on RPi 0 W, while numpy takes ~20 mins.

sudo pip3 install luma luma.oled numpy -y

Tip #2: If you see a "Pillow" / "jpeg" error while installing Luma, don't worry. The p4wnsolo-joyterm script runs fine even with the error. If you'd like, you can manually install Pillow to make sure that part's good.

🔨 Install p4wnsolo-joyterm:

cd ~

git clone https://github.com/p4wnsolo/p4wnsolo-joyterm.git

cd p4wnsolo-joyterm

sudo python3 go.py

▶️ Usage:

Use the LEFT and RIGHT buttons on the OLED Joystick to switch characters
Press the CENTER Joystick button to add the current character to the Command Line
If you made a mistake, press KEY2 ("X") for Backspace
To switch KEYBOARD Layout, press KEY1. For example, the default keyboard layout is "a-z" (lowercase).
Launch the command: press KEY3 (">")
View the command output on the OLED screen

💡 Tips:

The SPACE character (" ") exists in at least two character sets: "a-z" and "A-Z" (both uppercase and lowercase alphabet character sets have the SPACE character after the "Z" character or before the "A" character).
The character set repeats (or "cycles") when the last character in the set is reached. So you can just keep scrolling through characters (ex: If you're on the A character, press Left to go to Z from A, or press Right to go from A to B).

There are four (4) character sets:

a-z (lowercase) (default)
0-9
special characters
A-Z (uppercase)

💻 Compatibility & Platforms

For developing the script, I actually used a RaspberryPi Zero 2.

To finish developing the script (make it cross-compatible), I ran it several times on Raspberry Pi Zero W running P4wnP1 ALOA latest.

Testing DONE on Pi Zero W (I ran the scripts on my RPi0W P4wnP1 and changed the code to be cross-platform).

To make the scripts compatible across Kali & Raspberry Pi, I used this code snippet from StackExchange.

📁 Files included:

The following list of files are required to run p4wnsolo-joyterm:

go.py – Adapted from a code snippet found somewhere

Launches the scripts that do the actual work:

p4wnsolo-joytext.py – Adapted from key_demo.py in SH1106 demo files (but by now it’s its own beast, pretty much)

Displays the “Enter Command” screen and takes text input using Joystick & buttons on OLED screen

p4wnsolo-terminal.py – Adapted from terminal.py in luma.examples

Runs the command
Prints the output onto the OLED screen

💬 Explanation of Scripts in p4wnsolo-joyterm

What is `go.py`?

Launches the p4wnsolo-joytext.py script to get text input from joystick and buttons on OLED screen
Then runs the p4wnsolo-terminal.py script to execute the text input (command)

What is `p4wnsolo-joytext.py`?

This script displays an Enter command screen on the SH1106 OLED display.
Then it waits for the user to press the joystick to change characters (using the Left and Right joystick buttons).
Pressing the Center joystick button adds the current character to the line.
KEY1 (font-awesome keyboard icon) switches keyboard layouts:
- 0 The default layout is uppercase alphabet (A-Z)
- 1 Next is 0-9
- 2 Then the special characters (./!@#$%^&* etc)
- The SPACE character is currently located in this character set
- 3 Finally, we have lowercase alphabet (a-z)
KEY2 (“X”) is the backspace key.
KEY3 (“>”) is the GO button.

After you press the GO button:

The joyterm script writes the text you entered into a text file called thecommand.txt.

Last but not least, joyterm shows text to indicate that it's actually running the Command you entered ("Running.. Started").

What is `p4wnsolo-terminal.py`?

The terminal.py script is an adaptation of the terminal.py script found in luma.examples repo.

The terminal.py from luma.examples utilizes a LOOP to display “lines” of text on the OLED screen.

But the text it displays is static – it’s generated by simple code (resulting in “Line 1, Line 2, Line 3..”).

So I simply replaced that part of the code to display lines of text from a TEXT FILE. This was way more interesting than just displaying lines being generated by code.

Now that we got the (excellent) terminal.py (from luma.examples) script to display dynamic content, we’re ready to take the command input from the user and send it to terminal.py.

🤖 Entering Commands & text using joystick on OLED screen

Just enter any command you normally would on the Linux command line.

Here are some nice, short, sweet commands if you're out of ideas:

ls
iwconfig
who
whoami
pwd
df
jobs
history
uname
top
hostname
wget FileUrlGoesHere
torghost -h
- (TorProxy - Must install torghost first)
transmission-cli https://UrlHere.torrent -w ~/Downloads
- (Download a torrent - must install transmission-cli first)
- (Command display length limit currently won't allow this)

Or be bold, install Wifite, and try sudo wifite.

✅ The Docket

To Do

Eventually I'll add these features:

Run previous command(s) (like pressing the "Up" arrow key in Linux CLI)
Add a few useful Linux aliases to speed up entry of common commands
Move command-entry area to very bottom of screen
(Priority #1) Have the script continue to read lines of text even after the last line was read (until the “X” key is pressed)
(Priority #2) Have the command-entry area re-appear after no new lines in text file have been read for 2 or 3 seconds

The purpose of this is to enable the user to input more text when a program pauses and asks for user input (such as Wifite and many other hacking programs for Linux)

Optional add-on: Show a countdown / progress bar/line that fills from top of screen to bottom, to meet the command-entry area when it appears after X seconds of no more text output

👢 How to Run `joyterm` on Boot

To run this script on boot, just follow the steps below to add p4wnsolo-joyterm to Crontab as a new entry.

How to Add p4wnsolo-joyterm to Crontab

Enter crontab -e on command line
Paste the code below in the first empty line:

For P4wnP1 / Kali Linux:

@reboot cd /root/p4wnsolo-joyterm/ && /usr/bin/python3 /root/p4wnsolo-joyterm/go.py

For Raspberry Pi OS:

@reboot cd /home/pi/p4wnsolo-joyterm/ && /usr/bin/python3 /home/pi/p4wnsolo-joyterm/go.py

The crontab entry above does the following:

Changes folders into the main working folder using crontab
Then runs the P4wnP1 OLED Terminal wrapper

🎁 Aliases to Add

Side project idea – PiPod Shuffle:

Use a quick alias to play MP3 files randomly to mimic and iPod shuffle.

Command:

Mplayer:

mplayer -loop 0 -shuffle $(cat your_playlist.m3u)

alias music='mplayer --shuffle *

or Mimic an iPod shuffle using this command:

https://www.cyberciti.biz/tips/bash-aliases-mac-centos-linux-unix.html

Find a File

I can never remember the syntax for this command. So why not make an alias for it.

Command:

find /home -name *.jpg

Modify ping Behavior

I don’t know why I’d do this, but I might:

Command:

Stop after sending count ECHO_REQUEST packets:

alias ping=’ping -c 5′

Do not wait interval 1 second, go fast #

alias fastping=’ping -c 100 -s.2′

⚰️ Wrap-Up:

To make this script, I basically just modified the terminal.py file from Luma.examples

Take terminal.py from luma.examples
Find the loop that displays “Line 1, Line 2, Line 3”
Replace it with a loop to read lines from a text file

The result from changing this code was significant:

To Do

Done

Add space character (” “) between A and Z in A-Z uppercase AND lowercase charsets

Add space character to 0-9 charset

The terminal.py script now shows output from any program – as long as that program is outputting to a text file.

Since getting programs to output to text in Linux is pretty easy, we can now display pretty much any program’s output on our OLED screen.

Contact

@p4wnsolo on Twitter @p4wnsolo on GitHub

Thanks

V0rT3x MaMe82 Stephane BeBoX

p4wnsolo / p4wnsolo-joyterm Goto Github PK