It's a NAPALM Community Driver for Huawei VRP5/VRP8 Enterprise/Service Provider Routers and Switches.
This repository is reference NAPALM-CE and Cisco IOS code, thanks for thdDaniel's contribution 中文版
- NE Series:
- 40E, 8000
- AR Series:
- 2200
- ATN 900 Series:
- 910B, 910C and 910D
- S Switch Series:
- S5700, S6700
This driver is not limited to these models and series, these are just devices where the driver have been tested.
The driver is under development and iteration.
| API | Description |
|---|---|
| get_facts() | Return general device information |
| get_config() | Read config |
| get_arp_table() | Get device ARP table |
| get_mac_address_table() | Get mac table of connected devices |
| get_interfaces() | Get interface information |
| get_interfaces_ip() | Get interface IP information |
| get_interfaces_counters() | Get interface counters |
| get_lldp_neighbors() | Fetch LLDP neighbor information |
| API | Description |
|---|---|
| cli() | Send any cli commands |
| load_merge_candidate() | Load config |
| compare_config() | A string showing the difference between the running configuration and the candidate configuration |
| discard_config() | Discards the configuration loaded into the candidate |
| commit_config() | Commits the changes requested by the method load_replace_candidate or load_merge_candidate |
| API | Description |
|---|---|
| is_active() | get devices active status |
| ping() | Ping remote ip |
- get_bgp_config
- get_bgp_neighbors
- get_bgp_neighbors_detail
- get_environment
- get_ipv6_neighbors_table
- get_lldp_neighbors_detail
- get_network_instances
- get_ntp_peers
- get_ntp_servers
- get_ntp_stats
- get_optics
- get_route_to
- get_snmp_information
- get_users
- get_vlans
You can install napalm-huawei-vrp with pip:
pip install napalm-huawei-vrp
That will install napalm and huawei_vrp driver currently available.
You can upgrade napalm-huawei-vrp with pip once the new version released:
pip install --upgrade napalm-huawei-vrp
check the package version.
pip list | grep napalm-huawei-vrp
from napalm import get_network_driver
driver = get_network_driver('huawei_vrp')
device = driver(hostname='192.168.76.10', username='admin', password='this_is_not_a_secure_password')
device.open()
# Send Any CLI command
send_command = device.cli(['dis version'])
# Return general device information
get_facts = device.get_facts()
print(get_facts)
# other API
device.get_config()
device.get_arp_table()
device.get_mac_address_table()
device.get_interfaces()
device.get_interfaces_ip()
device.get_interfaces_counters()
device.get_lldp_neighbors()Slack is probably the easiest way to get help with NAPALM. You can find us in the channel napalm on the network.toCode() team.
- NAPALM Network Automation Python: Working with Huawei VRP by Michael Alvarez
- NAPALM Network Automation Python: Collect Data from Multiple Vendors. Cisco and Huawei by Michael Alvarez
- NAPALM Network Automation Python: Making Configurations in a Multivendor Network. Cisco and Huawei by Michael Alvarez
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent