orangepi-xunlong / openwrt Goto Github PK
View Code? Open in Web Editor NEWFor Orange Pi R1 Plus/R1 Plus LTS
License: Other
For Orange Pi R1 Plus/R1 Plus LTS
License: Other
please help me make openwrt for orangepipc, always fail it can't, can you help me step by step
分支: master branch
配置文件:configs/plus_lts
xxx@xxx-virtual-machine:~/openwrt/orangepi/openwrt$ ./scripts/feeds install -a
Installing all packages from feed packages.
Installing all packages from feed luci.
Installing all packages from feed routing.
Installing all packages from feed telephony.
Installing all packages from feed helloworld.
Installing all packages from feed passwall.
xxx@xxx-virtual-machine:~/openwrt/orangepi/openwrt$ make deconfig
make[2]: Entering directory '/home/xxx/openwrt/orangepi/openwrt/scripts/config'
make[2]: 'conf' is up to date.
make[2]: Leaving directory '/home/xxx/openwrt/orangepi/openwrt/scripts/config'
time: target/linux/prereq#0.12#0.04#0.15
make[1] deconfig
make -r deconfig: build failed. Please re-run make with -j1 V=s or V=sc for a higher verbosity level to see what's going on
make: *** [/home/xxx/openwrt/orangepi/openwrt/include/toplevel.mk:230: deconfig] Error 1
xxx@xxx-virtual-machine:~/openwrt/orangepi/openwrt$ make menuconfig
tmp/.config-package.in:136543: syntax error
tmp/.config-package.in:136542: unknown statement "---help---"
tmp/.config-package.in:136543: unknown statement "Ntfs-3g"
tmp/.config-package.in:136544:warning: ignoring unsupported character ','
tmp/.config-package.in:136544: unknown statement "If"
tmp/.config-package.in:136545: unknown statement "etc."
tmp/.config-package.in:136546: unknown statement "of"
make: *** [/home/xxx/openwrt/orangepi/openwrt/include/toplevel.mk:134: menuconfig] Error 1
git.openwrt.org/feed/packages.git
的一些包已迁移到openwrt内部,导致依赖缺失,目前使用该库已无法顺利完成编译
设备 pi 5 plus
连续四天
尝试过 aliyun 腾讯云 本地linux docker 各种编译方式, 始终无法编译通过
总过各种插件无法安装
官网提供的编译教程根本编译不过
按照OrangePi_3B_RK3566_用户手册用仓库源码编译的img刷入sd卡后无法启动 ,串口的日志:
out
U-Boot SPL board init
U-Boot SPL 2017.09-orangepi (Jan 02 2024 - 14:37:51)
unrecognized JEDEC id bytes: ff, ff, ff
Trying to boot from MMC1
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking uboot 0x00a00000 ... sha256(d78e2c89d3...) + OK
## Checking fdt 0x00b43e48 ... sha256(eecf82f55a...) + OK
Total: 661.530 ms
Jumping to U-Boot(0x00a00000)
但是官网 Orange-Pi-3B 提供的openwrt镜像可以正常启动。
请问官网提供的镜像是哪个版本的? 如何编译的?
21.02.1 从官方源安装 cifsmount 时,提示内核版本不兼容。
根据网上找到的方法修改 /usr/lib/opkg/status 的 hash 后,虽然可以装上,但挂载时提示 'Segmentation fault'
root@OpenWrt:~# opkg install kmod-macvlan luci-app-mwan3
Unknown package 'kmod-macvlan'.
Installing luci-app-mwan3 (git-21.126.37401-0ddb72d) to root...
Downloading https://downloads.openwrt.org/releases/21.02.1/packages/aarch64_generic/luci/luci-app-mwan3_git-21.126.37401-0ddb72d_all.ipk
Installing mwan3 (2.10.13-1) to root...
Downloading https://downloads.openwrt.org/releases/21.02.1/packages/aarch64_generic/packages/mwan3_2.10.13-1_all.ipk
Installing libuci-lua (2021-04-14-4b3db117-5) to root...
Downloading https://downloads.openwrt.org/releases/21.02.1/packages/aarch64_generic/base/libuci-lua_2021-04-14-4b3db117-5_aarch64_generic.ipk
Configuring libuci-lua.
Configuring mwan3.
Configuring luci-app-mwan3.
Collected errors:
如果要重新编译固件,可以给个编译教程吗?
[ 34.721578] reboot: Restarting system
INFO: PSCI Power Domain Map:
INFO: Domain Node : Level 2, parent_node -1, State ON (0x0)
INFO: Domain Node : Level 1, parent_node 0, State ON (0x0)
INFO: Domain Node : Level 0, parent_node 0, State ON (0x0)
INFO: Domain Node : Level 0, parent_node 0, State ON (0x0)
INFO: CPU Node : MPID 0x0, parent_node 1, State ON (0x0)
INFO: CPU Node : MPID 0x1, parent_node 1, State ON (0x0)
INFO: CPU Node : MPID 0x2, parent_node 1, State ON (0x0)
INFO: CPU Node : MPID 0x3, parent_node 1, State ON (0x0)
固件是自编译,插件有mwan3虚拟多拨、负载均衡、飞机场(没有使用),基本没有其它插件了,虚拟了3个出来,平时连接数在30左右,走了一个旁路由做飞机场,过几天或者1周左右,网页和ssh就无法访问,旁路由是可以网页和ssh访问。 然后这个拔电重启就好了,tf卡是32g的,但是系统那里显示只用了200m。
root@OpenWrt:~# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 200.8M 99.3M 97.4M 50% /
tmpfs 494.3M 536.0K 493.8M 0% /tmp
tmpfs 512.0K 0 512.0K 0% /dev
出现这个问题后,在哪里寻找日志?
Please PR R1+ changes to the official OpenWrt upstream repo so we have official builds and long term support.
Please update the � version to English on the homepage. I can't use Chinese. Thanks.
adblock
banip
blkid
bmon
dmesg
e2fsprogs
fdisk
htop
ifstat
iftop
iperf
iperf3
nano
rsync
speedtest-netperf
tcpdump
luci-app-adblock
luci-app-advanced-reboot
luci-app-aria2
luci-app-banip
luci-app-commands
luci-app-ddns
luci-app-mjpg-streamer
luci-app-nextdns
luci-app-nlbwmon
luci-app-ntpc
luci-app-openvpn
luci-app-qos
luci-app-samba4
luci-app-simple-adblock
luci-app-squid
luci-app-sqm
luci-app-transmission
luci-app-unbound
luci-app-vnstat
luci-app-vnstat2
luci-app-watchcat
luci-app-minidlna
luci-app-nlbwmon
luci-app-ntpc
luci-app-squid
luci-app-sqm
luci-app-statistics
luci-proto-wireguard
wireguard-tools
luci-app-wireguard
I have successfully installed openwrt-aarch64-opi3b-23.05-linux6.1.62-ext4.img.gz
from the official download page on Orange Pi 3B. But there is not recent updated version yet. Anyone can direct me a link or branch from this repository so Ican build by my self?
Thanks.
主机型号 | Xunlong Orange Pi R1 Plus (CpuMark : 9643.465730 Scores)
架构 | ARMv8 Processor x 4 (1200MHz, 73.8°C )
固件版本 | OpenWrt R21.8.6 / LuCI Master (git-21.211.30217-03784c3)
内核版本 | 5.4.138
官方及lean大固件都没有相关风扇控制的固件或者脚本,请教一下,如何可以做到温控风扇。如温度超过60风扇开始,小于60停止。
make[5]: Entering directory '/home/xxx/openwrt/orangepi/openwrt/build_dir/hostpkg/gettext-0.19.8.1'
Making all in gnulib-local
make[6]: Entering directory '/home/xxx/openwrt/orangepi/openwrt/build_dir/hostpkg/gettext-0.19.8.1/gnulib-local'
make[6]: Nothing to be done for 'all'.
make[6]: Leaving directory '/home/xxx/openwrt/orangepi/openwrt/build_dir/hostpkg/gettext-0.19.8.1/gnulib-local'
Making all in gettext-runtime
make[6]: Entering directory '/home/xxx/openwrt/orangepi/openwrt/build_dir/hostpkg/gettext-0.19.8.1/gettext-runtime'
make all-recursive
make[7]: Entering directory '/home/xxx/openwrt/orangepi/openwrt/build_dir/hostpkg/gettext-0.19.8.1/gettext-runtime'
Making all in intl
make[8]: Entering directory '/home/xxx/openwrt/orangepi/openwrt/build_dir/hostpkg/gettext-0.19.8.1/gettext-runtime/intl'
make[8]: Leaving directory '/home/xxx/openwrt/orangepi/openwrt/build_dir/hostpkg/gettext-0.19.8.1/gettext-runtime/intl'
make[7]: Leaving directory '/home/xxx/openwrt/orangepi/openwrt/build_dir/hostpkg/gettext-0.19.8.1/gettext-runtime'
make[6]: Leaving directory '/home/xxx/openwrt/orangepi/openwrt/build_dir/hostpkg/gettext-0.19.8.1/gettext-runtime'
make[5]: Leaving directory '/home/xxx/openwrt/orangepi/openwrt/build_dir/hostpkg/gettext-0.19.8.1'
make[4]: Leaving directory '/home/xxx/openwrt/orangepi/openwrt/build_dir/hostpkg/gettext-0.19.8.1'
make[3]: Leaving directory '/home/xxx/openwrt/orangepi/openwrt/package/libs/gettext-full'
time: package/libs/gettext-full/host-compile#192.35#33.88#238.65
ERROR: package/libs/gettext-full [host] failed to build.
make[2]: Leaving directory '/home/xxx/openwrt/orangepi/openwrt'
make[1]: Leaving directory '/home/xxx/openwrt/orangepi/openwrt'
我下载官网提供的openwrt-aarch64-opizero2-23.12-linux6.1.62-ext4.img.gz
固件,启动后在管理页面没有找到Wi-Fi配置
使用ifconfig 也没有看到Wi-Fi设备,请问如何添加Wi-Fi支持
While trying installing wireguard, I get the error of incompatibility of the kernel's version. See screenshot below:
https://postimg.cc/zLCLXLD4
Build Platform Debian 10.
Target board OrangePi R1 Plus
"ERROR: package/libs/libnfnetlink failed to build."
./scripts/feeds were fully updated and upgraded.
Same config used to build without issue.
I'm using OpenWRT released on the 23rd for Orange PI 5. When I try to install the sqm-scripts
package, the dependencies are not being installed, due to compatibility with Kernel 5.10.110. Is there a way to recompile a new build with another Kernel version? Thanks!
Hello ,
I am trying to boot firmware from spi flash
before starting flash the chip, i get this warning in dmesg
[ 0.152963] spi-nor spi0.0: unrecognized JEDEC id bytes: 5e 40 18 5e 40 18
[ 0.153642] spi-nor: probe of spi0.0 failed with error -2
can you give me pointers ?
thanks
The provided image is based on an old snapshot, but the snapshot feed often updates so most kmod packages won't install now as the kernel is outdated.
Please provide a image for release version(21.02.0 for now). For release versions, user can still install kmod packages properly even after the version is outdated.
官网提供的镜像包是基于snapshot版本且已过时,由于openwrt的snapshot源经常更新,而且官网包内核版本过时,大量kmod包已无法安装
建议打包基于release版本的安装镜像,release版可以保证即使停止支持也能正常安装kmod包
Hi
Getting error when trying to compile with zero2 target and including uwe5622 driver.
Clean installation of Debian [version 12.5 / 6.1.0-20-amd64]; clean installation of OpenWrt build environment.
Receiving following compile error:
make[3] -C feeds/packages/utils/bash compile
make[3] -C package/kernel/uwe5622 compile
make[3] -C feeds/luci/collections/luci-light compile
make[3] -C package/utils/e2fsprogs compile
make[3] -C package/utils/f2fs-tools compile
ERROR: package/kernel/uwe5622 failed to build.
make[3] -C package/utils/f2fs-tools compile
make[3] -C package/utils/f2fs-tools compile
make[3] -C package/utils/f2fs-tools compile
make -r world: build failed. Please re-run make with -j1 V=s or V=sc for a higher verbosity level to see what's going on
make: *** [/home/stewart/openwrt/include/toplevel.mk:232: world] Error 1
More verbose output:
./scripts/check-local-export /home/stewart/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-sunxi_cortexa53/uwe5622/unisocwifi/debug.o
aarch64-openwrt-linux-musl-ld -EL -maarch64elf -z noexecstack --no-warn-rwx-segments -r -o /home/stewart/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-sunxi_cortexa53/uwe5622/sprdwl_ng.o @/home/stewart/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-sunxi_cortexa53/uwe5622/sprdwl_ng.mod
{ echo /home/stewart/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-sunxi_cortexa53/uwe5622/uwe5622_bsp_sdio.ko; echo /home/stewart/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-sunxi_cortexa53/uwe5622/sprdwl_ng.ko; :; } > /home/stewart/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-sunxi_cortexa53/uwe5622/modules.order
bash ./scripts/modules-check.sh /home/stewart/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-sunxi_cortexa53/uwe5622/modules.order
make -f ./scripts/Makefile.modpost
=====================================================================
=====================================================================
=====================================================================
src=/home/stewart/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-sunxi_cortexa53/uwe5622
sed 's/ko$/o/' /home/stewart/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-sunxi_cortexa53/uwe5622/modules.order | scripts/mod/modpost -o /home/stewart/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-sunxi_cortexa53/uwe5622/Module.symvers -e -i Module.symvers -i /home/stewart/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-sunxi_cortexa53/symvers/mac80211.symvers -T -
ERROR: modpost: "sched_setscheduler" [/home/stewart/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-sunxi_cortexa53/uwe5622/uwe5622_bsp_sdio.ko] undefined!
make[5]: *** [scripts/Makefile.modpost:126: /home/stewart/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-sunxi_cortexa53/uwe5622/Module.symvers] Error 1
make[4]: *** [Makefile:1966: modpost] Error 2
make[4]: Leaving directory '/home/stewart/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-sunxi_cortexa53/linux-6.1.74'
make[3]: *** [Makefile:51: /home/stewart/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-sunxi_cortexa53/uwe5622/.built] Error 2
make[3]: Leaving directory '/home/stewart/openwrt/package/kernel/uwe5622'
time: package/kernel/uwe5622/compile#21.79#7.17#28.85
ERROR: package/kernel/uwe5622 failed to build.
make[2]: *** [package/Makefile:128: package/kernel/uwe5622/compile] Error 1
make[2]: Leaving directory '/home/stewart/openwrt'
make[1]: *** [package/Makefile:122: /home/stewart/openwrt/staging_dir/target-aarch64_cortex-a53_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/stewart/openwrt'
make: *** [/home/stewart/openwrt/include/toplevel.mk:232: world] Error 2
Compiling without uwe5622 driver works fine.
Please can we fix this - I need the Wi-Fi driver in production.
I am happy to help if further information needed.
Thank you.
curl -f --connect-timeout 20 --retry 5 --location --insecure https://sources.cdn.openwrt.org/arm-trusted-firmware-rk3328-2021-06-01-7d631e0d.tar.xz
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
curl: (22) The requested URL returned error: 404
Are you planning on creating a more updated image or in doing a PR to add proper support in Openwrt? The image built and added to Orange Pi site doesn't have support for some of the packages people are more used to, like wireguard.
Hello
when i add eth0 to eth1 in bridge mode
the interface doesn't work properly have you had experience this ?
thanks
I can't install some modules with the old kernel.
Please update new kernel.
make[3]: Leaving directory '/home/nerd/opizero3/openwrt/package/kernel/uwe5622'
time: package/kernel/uwe5622/compile#1.53#0.78#3.55
ERROR: package/kernel/uwe5622 failed to build.
make[2]: *** [package/Makefile:128: package/kernel/uwe5622/compile] Error 1
make[2]: Leaving directory '/Compile'
老是报错在这里
是哪里的问题
有什么解决办法吗
f+++++++++ unicore/lib/XIDS/Y.pl
chmod -R u+w /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-unicore/usr/lib/perl5/5.38
---> Stripping modules in: /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-unicore/usr/lib/perl5/5.38
find /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-unicore/usr/lib/perl5/5.38 -name *.pm -or -name *.pl | xargs -r sed -i -e '/^=(head|pod|item|over|back|encoding|begin|end|for)/,/^=cut/d' -e '/^=(head|pod|item|over|back|encoding|begin|end|for)/,$d' -e '/^#$/d' -e '/^#[^!"'"'"']/d'
touch /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-unicore.installed
rm -rf /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-utf8.installed /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-utf8
mkdir -p /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-utf8
install -d -m0755 /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-utf8/usr/lib/perl5/5.38
(cd /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/ipkg-install/usr/lib/perl5/5.38 && rsync --relative -rlHp --itemize-changes --exclude=*.pod --exclude=.packlist --prune-empty-dirs utf8.pm /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-utf8/usr/lib/perl5/5.38)
f+++++++++ utf8.pm
chmod -R u+w /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-utf8/usr/lib/perl5/5.38
---> Stripping modules in: /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-utf8/usr/lib/perl5/5.38
find /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-utf8/usr/lib/perl5/5.38 -name *.pm -or -name *.pl | xargs -r sed -i -e '/^=(head|pod|item|over|back|encoding|begin|end|for)/,/^=cut/d' -e '/^=(head|pod|item|over|back|encoding|begin|end|for)/,$d' -e '/^#$/d' -e '/^#[^!"'"'"']/d'
touch /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-utf8.installed
rm -rf /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-xsloader.installed /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-xsloader
mkdir -p /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-xsloader
install -d -m0755 /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-xsloader/usr/lib/perl5/5.38
(cd /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/ipkg-install/usr/lib/perl5/5.38 && rsync --relative -rlHp --itemize-changes --exclude=*.pod --exclude=.packlist --prune-empty-dirs XSLoader.pm /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-xsloader/usr/lib/perl5/5.38)
f+++++++++ XSLoader.pm
chmod -R u+w /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-xsloader/usr/lib/perl5/5.38
---> Stripping modules in: /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-xsloader/usr/lib/perl5/5.38
find /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-xsloader/usr/lib/perl5/5.38 -name *.pm -or -name *.pl | xargs -r sed -i -e '/^=(head|pod|item|over|back|encoding|begin|end|for)/,/^=cut/d' -e '/^=(head|pod|item|over|back|encoding|begin|end|for)/,$d' -e '/^#$/d' -e '/^#[^!"'"'"']/d'
touch /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-xsloader.installed
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-base/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-base_installed
echo "perlbase-base" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-bytes/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-bytes_installed
echo "perlbase-bytes" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-class/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-class_installed
echo "perlbase-class" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-config/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-config_installed
echo "perlbase-config" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-cwd/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-cwd_installed
echo "perlbase-cwd" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-errno/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-errno_installed
echo "perlbase-errno" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-essential/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-essential_installed
echo "perlbase-essential" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-fcntl/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-fcntl_installed
echo "perlbase-fcntl" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-file/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-file_installed
echo "perlbase-file" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-filehandle/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-filehandle_installed
echo "perlbase-filehandle" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-i18n/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-i18n_installed
echo "perlbase-i18n" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-integer/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-integer_installed
echo "perlbase-integer" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-io/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-io_installed
echo "perlbase-io" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-list/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-list_installed
echo "perlbase-list" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-locale/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-locale_installed
echo "perlbase-locale" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-params/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-params_installed
echo "perlbase-params" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-posix/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-posix_installed
echo "perlbase-posix" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-re/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-re_installed
echo "perlbase-re" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-scalar/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-scalar_installed
echo "perlbase-scalar" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-selectsaver/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-selectsaver_installed
echo "perlbase-selectsaver" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-socket/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-socket_installed
echo "perlbase-socket" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-symbol/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-symbol_installed
echo "perlbase-symbol" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-tie/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-tie_installed
echo "perlbase-tie" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-unicore/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-unicore_installed
echo "perlbase-unicore" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-utf8/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-utf8_installed
echo "perlbase-utf8" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
mkdir -p /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp
SHELL= flock /home/nerd/openwrt/tmp/.root-copy.flock -c 'cp -fpR /home/nerd/openwrt/build_dir/target-aarch64_cortex-a53_musl/perl/perl-5.38.2/.pkgdir/perlbase-xsloader/. /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/'
touch /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/root-sunxi/stamp/.perlbase-xsloader_installed
echo "perlbase-xsloader" >> /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/pkginfo/perl.default.install
make[3]: Leaving directory '/home/nerd/openwrt/feeds/packages/lang/perl'
time: package/feeds/packages/perl/compile#673.89#54.21#421.57
make[2]: Leaving directory '/home/nerd/openwrt'
make[1]: *** [package/Makefile:122: /home/nerd/openwrt/staging_dir/target-aarch64_cortex-a53_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/nerd/openwrt'
make: *** [/home/nerd/openwrt/include/toplevel.mk:232: world] Error 2
这要怎么弄?
WARNING: Makefile 'package/feeds/luci/luci-app-firewall/Makefile' has a dependency on 'uci-firewall', which does not exist
WARNING: Makefile 'package/feeds/packages/qemu/Makefile' has a dependency on 'libfdt', which does not exist
WARNING: Makefile 'package/feeds/packages/qemu/Makefile' has a dependency on 'libfdt', which does not exist
WARNING: Makefile 'package/feeds/luci/luci-app-firewall/Makefile' has a dependency on 'uci-firewall', which does not exist
WARNING: Makefile 'package/feeds/packages/qemu/Makefile' has a dependency on 'libfdt', which does not exist
WARNING: Makefile 'package/feeds/packages/qemu/Makefile' has a dependency on 'libfdt', which does not exist
make menuconfig 里找不到这个包,编译完后,ssh可以访问,http打不开,要咋个解决呢?
While trying to install the kmod-ipt-nat6
or kmod-nf-nat6
, I get the error of incompatibility of the kernel's version. See screenshot below:
https://postimg.cc/SJRt0d9K
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.