openplotter / openplotter-gpio

OpenPlotter app to get data from GPIO

Project site

http://www.sailoog.com/openplotter

openplotter-gpio's Issues

App is not opening when sensor is added

Reference to https://forum.openmarine.net/showthread.php?tid=3029&page=4

When adding a 1w sensor in the 1w tab of gpio, it will add a line in boot/config.txt. This is OK.
However, as in openmarine link you can see that some people including myself have an issue that the GPIO app is not opening anymore after that.

When removing the line "gpiopin=6" from dtoverlay=w1-gpio,gpiopin=6 in /boot/config.txt for the 1w interface seems to resolve the issue, that the app is not opening. So, 1w is still enabled, but just not assigned to a pin.
I have tried two separate sensors, doesn't seem to be a broken sensor or something. I can detect them from the terminal, they both have a separate unique address, here's one:

pi@openplotter:~ $ cd /sys/bus/w1/devices/
pi@openplotter:/sys/bus/w1/devices $ ls
28-01193a43c01e  w1_bus_master1

openplotter-gpio for version 3.0

Hi there! How it works openplotter-gpio for openplotter 3?
Is not available in Settings > Openplotter Apps and not unable to locate package trying with apt-get openplotter-gpio.
Thank you in advance.

pigpiod not running

Hi, Anybody know what this means and how I can solve it? pigpiod is installed, not sure why it is not running:

Checking GPIO... | Access to Signal K server validated | 1W enabled | GPIO service not running
↳pigpiod not running

I checked htop and a python script came out that is high in CPU usage, but not sure if it is caused by gpio: