openipc / sbc-groundstations

sbc-groundstations

sbc-groundstations

Instructions and prebuild images for openipc groundstations

Current boards supported and being developed:

• Orange Pi 3B
• Orange Pi 5
• Orange Pi 5 Plus
• Radxa Zero 3W

sbc-groundstations's Issues

Add more WNIC support for groundstations

I tested RTL8814AU and RTL8812BU wifi card with the driver from morrownr on my radxa zero 3w, They are all working fine.
Is it possible add RTL8814AU,RTL8812BU,RTL8812EU driver to groundstations? Then we have more choice, not only RTL8812AU.

Video distorted on Radxa Zero 3w w/ OpenIPC v1.5.0-rc2

Hi, I am testing Radxa Zero 3w w/ OpenIPC v1.5.0-rc2 with ssc338q-imx415 camera. No matter what bitrate, resolution or frame rate I use the image gets distorted, especially when the camera does not move for some time and then starts moving. After a couple of seconds the image gets restores and then after a random time interval of several seconds it gets distorted again. Is something wrong with the decoder? Everything works fine on NVR and I cannot blame my air unit (my camera) for this.

Thanks

Can not get Video on OrangePi 5 Plus w/ OpenIPC v1.2.0

Hi,
I was flash the image to orangepi 5 plus and follow the guide (Release/orangepi5plus-v1.2.0) to gen 2 keys: drone.key and gs.key. Next step I transfer your gs.key to OrangePi 5 Plus's /etc directory and put drone.key to my camera's /etc directory. Then reboot this two devices.
However, the monitor only display the desktop.png(which is openipc icon).
After all , I check the config channel in both drone and groundstations, it seems both in same channel. And I confirm the gs has received the frame package because tcpdump shows the data. It seems there are no program to decodec the rtsp data (like gstreamer).
Is there any key step that I miss?