openipc / device-mjsxj02hl Goto Github PK
View Code? Open in Web Editor NEWOpenIPC for Xiaomi MJSXJ02HL
Home Page: https://openipc.org
License: MIT License
OpenIPC for Xiaomi MJSXJ02HL
Home Page: https://openipc.org
License: MIT License
Hello,
I try to use motion guard feature to send video and snapshot files via FTP.
I have configured the send FTP section OK.
But there is no push to ftp.
Note that I also try to execute command "send2ftp.sh" and it work well (send a good snapshot)
Platform Version: 5.4.9
HiBurn Version: 5.3
HiSilicon Technologies Co., Ltd. All rights reserved. (C) 2011-2019
Platform Version: 5.4.9
HiBurn Version: 5.3
HiSilicon Technologies Co., Ltd. All rights reserved. (C) 2011-2019
Failed to send start frame, possible causes are as follows:
1. Make sure you have selected the right chip option,
2. Make sure you have selected the right serial port or other port,
3. Device has been re-powered on in 15 seconds after button pressed!
4. Make sure you have selected programmer file if it is a secure chip(Conax and Verimatrix advanced secure type are required);
5. If it is a secure chip, make sure the image to burn have been right signed and the key used to sign must be consistent with the key which the chip uses to make startup check.
Failed to download File!
Please check if the boot is correct!
Failed to download fastboot!
USB channels were closed successfully.
##################################################### ---- 10%
################################################### ---- 20%
################################################### ---- 30%
################################################### ---- 40%
################################################### ---- 50%
################################################### ---- 60%
################################################### ---- 70%
################################################### ---- 80%
################################################### ---- 90%
################################################### ---- 100%
Boot download completed!
start download process.
Boot started successfully!
Send command: getinfo version
version: U-Boot 2016.11-g1ed262d-dirty
[EOT](OK)
Send command: getinfo bootmode
spi
[EOT](OK)
Send command: sf probe 0
[EOT](OK)
Send command: getinfo spi
Block:64KB Chip:16MB*1
ID:0xC8 0x40 0x18
Name:"GD25Q128"
[EOT](OK)
Send command: sf probe 0
[EOT](OK)
Send command: sf erase 0x0 0x40000
Erasing at 0x10000 -- 25% complete.
Erasing at 0x20000 -- 50% complete.
Erasing at 0x30000 -- 75% complete.
Erasing at 0x40000 -- 100% complete.
SF: 262144 bytes @ 0x0 Erased: OK
[EOT](OK)
Send command: sf write 0x41000000 0x0 0x40000
device 0 offset 0x0, size 0x40000
Writing at 0x10000 -- 25% complete.
Writing at 0x20000 -- 50% complete.
Writing at 0x30000 -- 75% complete.
Writing at 0x40000 -- 100% complete.
SF: 262144 bytes @ 0x0 Written: [EOT](OK)
Send command: sf probe 0
[EOT](OK)
Send command: sf erase 0x40000 0x10000
Erasing at 0x50000 -- 100% complete.
SF: 65536 bytes @ 0x40000 Erased: OK
[EOT](OK)
Partition env burnt successfully!
Send command: mw.b 0x41000000 0xFF 0x1f0000
[EOT](OK)
Send command: Downloading File : uImage.hi3518ev300
[Download File by usb]
file = E:\Temp\OpenIPC for Xiaomi MJSXJ02HL\BURNBE\uImage.hi3518ev300
address = 0x41000000
fileLength = 1999352 B
#
done
Send command: sf probe 0
[EOT](OK)
Send command: sf erase 0x50000 0x200000
Erasing at 0x60000 -- 3% complete.
Erasing at 0x70000 -- 6% complete.
Erasing at 0x80000 -- 9% complete.
Erasing at 0x90000 -- 12% complete.
Erasing at 0xa0000 -- 15% complete.
Erasing at 0xb0000 -- 18% complete.[EOT](OK)
Send command: sf write 0x41000000 0x50000 0x1f0000
device 0 offset 0x50000, size 0x1f0000
Writing at 0x60000 -- 3% complete.
Writing at 0x70000 -- 6% complete.
Writing at 0x80000 -- 9% complete.
Writing at 0x90000 -- 12% complete.
Writing at 0xa0000 -- 16% complete.[EOT](OK)
Partition kernel burnt successfully!
Send command: mw.b 0x41000000 0xFF 0x500000
[EOT](OK)
Send command: Downloading File : rootfs.squashfs.hi3518ev300
[Download File by usb]
file = E:\Temp\OpenIPC for Xiaomi MJSXJ02HL\BURNBE\rootfs.squashfs.hi3518ev300
address = 0x41000000
fileLength = 5230592 B
##
done
Send command: sf probe 0
[EOT](OK)
Send command: sf erase 0x250000 0x500000
Erasing at 0x260000 -- 1% complete.
Erasing at 0x270000 -- 2% complete.
Erasing at 0x280000 -- 3% complete.
Erasing at 0x290000 -- 5% complete.
Erasing at 0x2a0000 -- 6% complete.
Erasing at 0x2b0000 -- 7% complete.[EOT](OK)
Send command: sf write 0x41000000 0x250000 0x500000
device 0 offset 0x250000, size 0x500000
Writing at 0x260000 -- 1% complete.
Writing at 0x270000 -- 2% complete.
Writing at 0x280000 -- 3% complete.
Writing at 0x290000 -- 5% complete.
Writing at 0x2a0000 -- 6% complete.[EOT](OK)
Partition rootfs burnt successfully!
Send command: sf probe 0
[EOT](OK)
Send command: sf erase 0x750000 0x8b0000
Erasing at 0x760000 -- 0% complete.
Erasing at 0x770000 -- 1% complete.
Erasing at 0x780000 -- 2% complete.
Erasing at 0x7a0000 -- 3% complete.
Erasing at 0x7b0000 -- 4% complete.
Erasing at 0x7c0000 -- 5% complete.[EOT](OK)
Partition rootfs_data burnt successfully!
Send command: reset
reset success!
Partition burnt completed!
USB channels were closed successfully.
after copying tools to sd, wifi etc, the led its blue, but not connected to wifi.
any ideas?
thanks
If you cannot connect to wifi, you can use the version in my warehouse to upgrade the firmware in WebUI https://github.com/muzihuaner/device-mjsxj02hl
Hi,
I have flashed the camera but it wont connect to wifi, here is some info from UART, can anyone help me with that? It seems like the wlan card is not detected
root@openipc-hi3518ev300:/mnt/mmcblk0p1/autoconfig/lib/modules/4.9.37/external# iwconfig
lo no wireless extensions.
WITHOUT SD CARD
System startup
Uncompress Ok!
U-Boot 2016.11-g6d2ed0c-dirty (Mar 20 2023 - 13:54:51 +0300)hi3518ev300
Relocation Offset is: 0374a000
Relocating to 43f4a000, new gd at 43b39ef0, sp at 43b39ed0
SPI Nor: hifmc_ip_ver_check(44): Check Flash Memory Controller v100 ...hifmc_ip _ver_check(50): Found
hifmc_spi_nor_probe(1802): SPI Nor ID Table Version 1.0
hifmc_spi_nor_probe(1827): SPI Nor(cs 0) ID: 0x1c 0x70 0x18
hifmc_spi_nor_probe(1892): Block:64KB hifmc_spi_nor_probe(1893): Chip:16MB hifmc _spi_nor_probe(1894): Name:"EN25QH128A"
hifmc100_spi_nor_probe(147): SPI Nor total size: 16MB
NAND: 0 MiB
MMC: Card did not respond to voltage select!
No SD device found !
hisi-sdhci: 0
In: serial
Out: serial
Err: serial
RAM size: 64MB
Net: eth0
Warning: eth0 (eth0) using random MAC address - 1a:10:e6:2c:f0:58
Press Ctrl-c to stop autoboot... 1
device 0 offset 0x50000, size 0x300000
SF: 3145728 bytes @ 0x50000 Read: OK
Image Name: Linux-4.9.37-hi3518ev300
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1929024 Bytes = 1.8 MiB
Load Address: 40008000
Entry Point: 40008000
Loading Kernel Image ... OK
Starting kernel ...
Booting Linux on physical CPU 0x0
Linux version 4.9.37 (runner@fv-az736-376) (buildroot-gcc-12.3.0) #1 Tue Feb 20 14:43:27 UTC 2024
CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
CPU: div instructions available: patching division code
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt:Machine model: Hisilicon HI3518EV300 DEMO Board
cmz zone is not set!
Memory policy: Data cache writeback
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8890
Kernel command line: mem=35M console=ttyAMA0,115200 panic=20 rootfstype=squashfs root=/dev/mtdblock3 init=/init mtdparts=hi_sfc:256k(boot),64k(env),2048k(kernel ),5120k(rootfs),-(rootfs_data) mmz_allocator=hisi
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 29852K/35840K available (4045K kernel code, 149K rwdata, 936K rodata, 19 6K init, 182K bss, 5988K reserved, 0K cma-reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc2800000 - 0xff800000 ( 976 MB)
lowmem : 0xc0000000 - 0xc2300000 ( 35 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc03fb808 (4047 kB)
.init : 0xc04e7000 - 0xc0518000 ( 196 kB)
.data : 0xc0518000 - 0xc053d5e0 ( 150 kB)
.bss : 0xc053f000 - 0xc056c878 ( 183 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:16 nr_irqs:16 16
Gic dist init...
arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, m ax_idle_ns: 440795202655 ns
sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
Switching to timer-based delay loop, resolution 20ns
clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 63 7086815595 ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 100.0 0 BogoMIPS (lpj=500000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x40008200 - 0x40008258
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911 2604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
Serial: AMBA PL011 UART driver
12040000.uart: ttyAMA0 at MMIO 0x12040000 (irq = 21, base_baud = 0) is a PL011 r ev2
console [ttyAMA0] enabled
12041000.uart: ttyAMA1 at MMIO 0x12041000 (irq = 22, base_baud = 0) is a PL011 r ev2
ssp-pl022 12070000.spi: ARM PL022 driver, device ID: 0x00800022
ssp-pl022 12070000.spi: mapped registers from 0x12070000 to c286b000
ssp-pl022 12071000.spi: ARM PL022 driver, device ID: 0x00800022
ssp-pl022 12071000.spi: mapped registers from 0x12071000 to c286f000
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
workingset: timestamp_bits=30 max_order=13 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
jffs2: version 2.2 (NAND) (ZLIB) (RTIME) (c) 2001-2006 Red Hat, Inc.
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
pl061_gpio 120b0000.gpio_chip: PL061 GPIO chip @0x120b0000 registered
pl061_gpio 120b1000.gpio_chip: PL061 GPIO chip @0x120b1000 registered
pl061_gpio 120b2000.gpio_chip: PL061 GPIO chip @0x120b2000 registered
pl061_gpio 120b4000.gpio_chip: PL061 GPIO chip @0x120b4000 registered
pl061_gpio 120b5000.gpio_chip: PL061 GPIO chip @0x120b5000 registered
pl061_gpio 120b6000.gpio_chip: PL061 GPIO chip @0x120b6000 registered
pl061_gpio 120b7000.gpio_chip: PL061 GPIO chip @0x120b7000 registered
pl061_gpio 120b8000.gpio_chip: PL061 GPIO chip @0x120b8000 registered
brd: module loaded
loop: module loaded
hisi-sfc hisi_spi_nor.0: SPI Nor ID Table Version 1.2
hisi-sfc hisi_spi_nor.0: Force global unlock
hisi-sfc hisi_spi_nor.0: SR1:[02]->[00]
hisi-sfc hisi_spi_nor.0: all blocks are unlocked.
@spi_nor_scan(), no "m25p,fast-read".
@spi_nor_scan(), modes->rd_modes:0xd.
hisi-sfc hisi_spi_nor.0: SR1 [00], SR2 [00], SR3 [00]
hisi-sfc hisi_spi_nor.0: nor->read_opcode[3: Read; 0B: Fast Read; 3B: Dual; BB: Dual IO; 6B: Quad; EB: Quad IO]: 0x3.
hisi-sfc hisi_spi_nor.0: en25qh128 (Chipsize 16 Mbytes, Blocksize 64KiB)
5 cmdlinepart partitions found on MTD device hi_sfc
5 cmdlinepart partitions found on MTD device hi_sfc
Creating 5 MTD partitions on "hi_sfc":
0x000000000000-0x000000040000 : "boot"
0x000000040000-0x000000050000 : "env"
0x000000050000-0x000000250000 : "kernel"
0x000000250000-0x000000750000 : "rootfs"
0x000000750000-0x000001000000 : "rootfs_data"
SPI Nand ID Table Version 2.7
Cannot found a valid SPI Nand Device
hisi_spi_nand_probe(175): Error: driver probe, result: -19
No OTP data, festa PHY use default ATE parameters!
festa PHY wait autotrim done timeout!
libphy: hisi_femac_mii_bus: probed
libphy: Fixed MDIO Bus: probed
hisi-femac 10040000.ethernet: connect to PHY failed!
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe6c hci version 0x110 quirks 0x20010 010
xhci-hcd xhci-hcd.0.auto: irq 116, io mem 0x10030000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: hub can't support USB3.0
hibvt_rtc 120e0000.rtc: rtc core: registered 120e0000.rtc as rtc0
hibvt_rtc 120e0000.rtc: RTC driver for hibvt enabled
i2c /dev entries driver
hibvt-i2c 12060000.i2c: hibvt-i2c0@100000hz registered
hibvt-i2c 12061000.i2c: hibvt-i2c1@100000hz registered
hibvt-i2c 12062000.i2c: hibvt-i2c2@100000hz registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on 10010000.sdhci [10010000.sdhci] using ADMA in legacy m ode
mmc1: SDHCI controller on 10020000.sdhci [10020000.sdhci] using ADMA in legacy m ode
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
NET: Registered protocol family 17
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
hibvt_rtc 120e0000.rtc: hctosys: unable to read the hardware clock
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
devtmpfs: mounted
Freeing unused kernel memory: 196K (c04e7000 - c0518000)
This architecture does not have kernel memory protection.
Timezone env variable not found, using system default.
Tue Feb 20 14:47:15 GMT 2024
Seeding 2048 bits without crediting
random: seedrng: uninitialized urandom read (256 bytes read)
Saving 2048 bits of non-creditable seed for next boot
Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
Loading modules:modprobe: module exfat not found in modules.dep
Starting rngd: OK
Customizer script not present...
Starting mdev...
Starting network...
ip: SIOCGIFINDEX: No such device
Starting ntpd: OK
Starting dropbear sshd: OK
Production mode
Starting httpd: OK
Starting mini-snmpd: DISABLED, OK
Starting telnetd: DISABLED, OK
Starting crond: OK
Loading of kernel modules...
mmz_start: 0x42300000, mmz_size: 29M
hisilicon: Get data from environment and set SENSOR as jxf22
insert audio
Starting telegram-bot.sh: OK
hisilicon: Loading video system has started...
Starting majestic: OK
Welcome to OpenIPC
WITH SD CARD + reset btn
U-Boot 2016.11-g6d2ed0c-dirty (Mar 20 2023 - 13:54:51 +0300)hi3518ev300
Relocation Offset is: 0374a000
Relocating to 43f4a000, new gd at 43b39ef0, sp at 43b39ed0
SPI Nor: hifmc_ip_ver_check(44): Check Flash Memory Controller v100 ...hifmc_ip_ver_check(50): Found
hifmc_spi_nor_probe(1802): SPI Nor ID Table Version 1.0
hifmc_spi_nor_probe(1827): SPI Nor(cs 0) ID: 0x1c 0x70 0x18
hifmc_spi_nor_probe(1892): Block:64KB hifmc_spi_nor_probe(1893): Chip:16MB hifmc_spi_nor_probe(1894): Name:"EN25QH128A"
hifmc100_spi_nor_probe(147): SPI Nor total size: 16MB
NAND: 0 MiB
MMC: hisi-sdhci: 0 (SD)
In: serial
Out: serial
Err: serial
RAM size: 64MB
Net: eth0
Warning: eth0 (eth0) using random MAC address - ea:3e:18:2e:9e:38
Press Ctrl-c to stop autoboot... 1
device 0 offset 0x50000, size 0x300000
SF: 3145728 bytes @ 0x50000 Read: OK
Image Name: Linux-4.9.37-hi3518ev300
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1929024 Bytes = 1.8 MiB
Load Address: 40008000
Entry Point: 40008000
Loading Kernel Image ... OK
Starting kernel ...
Booting Linux on physical CPU 0x0
Linux version 4.9.37 (runner@fv-az736-376) (buildroot-gcc-12.3.0) #1 Tue Feb 20 14:43:27 UTC 2024
CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
CPU: div instructions available: patching division code
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt:Machine model: Hisilicon HI3518EV300 DEMO Board
cmz zone is not set!
Memory policy: Data cache writeback
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8890
Kernel command line: mem=35M console=ttyAMA0,115200 panic=20 rootfstype=squashfs root=/dev/mtdblock3 init=/init mtdparts=hi_sfc:256k(boot),64k(env),2048k(kernel),5120k(rootfs),-(rootfs_data) mmz_allocator=hisi
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 29852K/35840K available (4045K kernel code, 149K rwdata, 936K rodata, 196K init, 182K bss, 5988K reserved, 0K cma-reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc2800000 - 0xff800000 ( 976 MB)
lowmem : 0xc0000000 - 0xc2300000 ( 35 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc03fb808 (4047 kB)
.init : 0xc04e7000 - 0xc0518000 ( 196 kB)
.data : 0xc0518000 - 0xc053d5e0 ( 150 kB)
.bss : 0xc053f000 - 0xc056c878 ( 183 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:16 nr_irqs:16 16
Gic dist init...
arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
Switching to timer-based delay loop, resolution 20ns
clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x40008200 - 0x40008258
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
Serial: AMBA PL011 UART driver
12040000.uart: ttyAMA0 at MMIO 0x12040000 (irq = 21, base_baud = 0) is a PL011 rev2
console [ttyAMA0] enabled
12041000.uart: ttyAMA1 at MMIO 0x12041000 (irq = 22, base_baud = 0) is a PL011 rev2
ssp-pl022 12070000.spi: ARM PL022 driver, device ID: 0x00800022
ssp-pl022 12070000.spi: mapped registers from 0x12070000 to c286b000
ssp-pl022 12071000.spi: ARM PL022 driver, device ID: 0x00800022
ssp-pl022 12071000.spi: mapped registers from 0x12071000 to c286f000
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
workingset: timestamp_bits=30 max_order=13 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
jffs2: version 2.2 (NAND) (ZLIB) (RTIME) (c) 2001-2006 Red Hat, Inc.
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
pl061_gpio 120b0000.gpio_chip: PL061 GPIO chip @0x120b0000 registered
pl061_gpio 120b1000.gpio_chip: PL061 GPIO chip @0x120b1000 registered
pl061_gpio 120b2000.gpio_chip: PL061 GPIO chip @0x120b2000 registered
pl061_gpio 120b4000.gpio_chip: PL061 GPIO chip @0x120b4000 registered
pl061_gpio 120b5000.gpio_chip: PL061 GPIO chip @0x120b5000 registered
pl061_gpio 120b6000.gpio_chip: PL061 GPIO chip @0x120b6000 registered
pl061_gpio 120b7000.gpio_chip: PL061 GPIO chip @0x120b7000 registered
pl061_gpio 120b8000.gpio_chip: PL061 GPIO chip @0x120b8000 registered
brd: module loaded
loop: module loaded
hisi-sfc hisi_spi_nor.0: SPI Nor ID Table Version 1.2
hisi-sfc hisi_spi_nor.0: Force global unlock
hisi-sfc hisi_spi_nor.0: SR1:[02]->[00]
hisi-sfc hisi_spi_nor.0: all blocks are unlocked.
@spi_nor_scan(), no "m25p,fast-read".
@spi_nor_scan(), modes->rd_modes:0xd.
hisi-sfc hisi_spi_nor.0: SR1 [00], SR2 [00], SR3 [00]
hisi-sfc hisi_spi_nor.0: nor->read_opcode[3: Read; 0B: Fast Read; 3B: Dual; BB: Dual IO; 6B: Quad; EB: Quad IO]: 0x3.
hisi-sfc hisi_spi_nor.0: en25qh128 (Chipsize 16 Mbytes, Blocksize 64KiB)
5 cmdlinepart partitions found on MTD device hi_sfc
5 cmdlinepart partitions found on MTD device hi_sfc
Creating 5 MTD partitions on "hi_sfc":
0x000000000000-0x000000040000 : "boot"
0x000000040000-0x000000050000 : "env"
0x000000050000-0x000000250000 : "kernel"
0x000000250000-0x000000750000 : "rootfs"
0x000000750000-0x000001000000 : "rootfs_data"
SPI Nand ID Table Version 2.7
Cannot found a valid SPI Nand Device
hisi_spi_nand_probe(175): Error: driver probe, result: -19
No OTP data, festa PHY use default ATE parameters!
festa PHY wait autotrim done timeout!
libphy: hisi_femac_mii_bus: probed
libphy: Fixed MDIO Bus: probed
hisi-femac 10040000.ethernet: connect to PHY failed!
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe6c hci version 0x110 quirks 0x20010010
xhci-hcd xhci-hcd.0.auto: irq 116, io mem 0x10030000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: hub can't support USB3.0
hibvt_rtc 120e0000.rtc: rtc core: registered 120e0000.rtc as rtc0
hibvt_rtc 120e0000.rtc: RTC driver for hibvt enabled
i2c /dev entries driver
hibvt-i2c 12060000.i2c: hibvt-i2c0@100000hz registered
hibvt-i2c 12061000.i2c: hibvt-i2c1@100000hz registered
hibvt-i2c 12062000.i2c: hibvt-i2c2@100000hz registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on 10010000.sdhci [10010000.sdhci] using ADMA in legacy mode
mmc1: SDHCI controller on 10020000.sdhci [10020000.sdhci] using ADMA in legacy mode
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
NET: Registered protocol family 17
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
hibvt_rtc 120e0000.rtc: hctosys: unable to read the hardware clock
mmc0: new high speed SD card at address 0001
mmcblk0: mmc0:0001 00000 1.83 GiB
mmcblk0: p1 p2
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
devtmpfs: mounted
Freeing unused kernel memory: 196K (c04e7000 - c0518000)
This architecture does not have kernel memory protection.
Timezone env variable not found, using system default.
Tue Feb 20 14:47:15 GMT 2024
Seeding 2048 bits without crediting
random: seedrng: uninitialized urandom read (256 bytes read)
Saving 2048 bits of non-creditable seed for next boot
Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
Loading modules:modprobe: module exfat not found in modules.dep
Starting rngd: OK
Customizer script not present...
Starting mdev...
autoconfig: '/mnt/mmcblk0p1/autoconfig/etc/init.d/S00autoled' -> '/etc/init.d/S00autoled'
autoconfig: '/mnt/mmcblk0p1/autoconfig/etc/init.d/S00resetbtn' -> '/etc/init.d/S00resetbtn'
autoconfig: '/mnt/mmcblk0p1/autoconfig/etc/init.d/S96autonight' -> '/etc/init.d/S96autonight'
autoconfig: '/mnt/mmcblk0p1/autoconfig/etc/init.d' -> '/etc/init.d'
autoconfig: '/mnt/mmcblk0p1/autoconfig/etc/network/interfaces.d/wlan0' -> '/etc/network/interfaces.d/wlan0'
autoconfig: '/mnt/mmcblk0p1/autoconfig/etc/network/interfaces.d' -> '/etc/network/interfaces.d'
autoconfig: '/mnt/mmcblk0p1/autoconfig/etc/network/interfaces' -> '/etc/network/interfaces'
autoconfig: '/mnt/mmcblk0p1/autoconfig/etc/network' -> '/etc/network'
autoconfig: '/mnt/mmcblk0p1/autoconfig/etc/majestic.yaml' -> '/etc/majestic.yaml'
autoconfig: '/mnt/mmcblk0p1/autoconfig/etc' -> '/etc'
autoconfig: '/mnt/mmcblk0p1/autoconfig/lib/modules/4.9.37/external/8189fs.ko' -> '/lib/modules/4.9.37/external/8189fs.ko'
autoconfig: '/mnt/mmcblk0p1/autoconfig/lib/modules/4.9.37/external' -> '/lib/modules/4.9.37/external'
autoconfig: '/mnt/mmcblk0p1/autoconfig/lib/modules/4.9.37' -> '/lib/modules/4.9.37'
autoconfig: '/mnt/mmcblk0p1/autoconfig/lib/modules' -> '/lib/modules'
autoconfig: '/mnt/mmcblk0p1/autoconfig/lib' -> '/lib'
autoconfig: '/mnt/mmcblk0p1/autoconfig/usr/bin/jsonfilter' -> '/usr/bin/jsonfilter'
autoconfig: '/mnt/mmcblk0p1/autoconfig/usr/bin/mosquitto_pub' -> '/usr/bin/mosquitto_pub'
autoconfig: '/mnt/mmcblk0p1/autoconfig/usr/bin/mosquitto_sub' -> '/usr/bin/mosquitto_sub'
autoconfig: '/mnt/mmcblk0p1/autoconfig/usr/bin' -> '/usr/bin'
autoconfig: '/mnt/mmcblk0p1/autoconfig/usr/lib/libhive_ANR.so' -> '/usr/lib/libhive_ANR.so'
autoconfig: '/mnt/mmcblk0p1/autoconfig/usr/lib/libhive_common.so' -> '/usr/lib/libhive_common.so'
autoconfig: '/mnt/mmcblk0p1/autoconfig/usr/lib/libhive_HPF.so' -> '/usr/lib/libhive_HPF.so'
autoconfig: '/mnt/mmcblk0p1/autoconfig/usr/lib/libhive_RES.so' -> '/usr/lib/libhive_RES.so'
autoconfig: '/mnt/mmcblk0p1/autoconfig/usr/lib/libmosquitto.so.1' -> '/usr/lib/libmosquitto.so.1'
autoconfig: '/mnt/mmcblk0p1/autoconfig/usr/lib/libubox.so' -> '/usr/lib/libubox.so'
autoconfig: '/mnt/mmcblk0p1/autoconfig/usr/lib' -> '/usr/lib'
autoconfig: '/mnt/mmcblk0p1/autoconfig/usr/sbin/autoled.sh' -> '/usr/sbin/autoled.sh'
autoconfig: '/mnt/mmcblk0p1/autoconfig/usr/sbin/autonight.sh' -> '/usr/sbin/autonight.sh'
autoconfig: '/mnt/mmcblk0p1/autoconfig/usr/sbin/led_control.sh' -> '/usr/sbin/led_control.sh'
autoconfig: '/mnt/mmcblk0p1/autoconfig/usr/sbin' -> '/usr/sbin'
autoconfig: '/mnt/mmcblk0p1/autoconfig/usr/share/fonts/truetype/UbuntuMono-Regular.ttf' -> '/usr/share/fonts/truetype/UbuntuMono-Regular.ttf'
autoconfig: '/mnt/mmcblk0p1/autoconfig/usr/share/fonts/truetype' -> '/usr/share/fonts/truetype'
autoconfig: '/mnt/mmcblk0p1/autoconfig/usr/share/fonts' -> '/usr/share/fonts'
autoconfig: '/mnt/mmcblk0p1/autoconfig/usr/share' -> '/usr/share'
autoconfig: '/mnt/mmcblk0p1/autoconfig/usr' -> '/usr'
autoconfig: Switching LED with GPIO52 to state 1
autoconfig: Switching LED with GPIO53 to state 1
Erasing 64 Kibyte @ d0000 - 9% complete. Cleanmarker written at c0000.
Erasing 64 Kibyte @ 1b0000 - 19% complete. Cleanmarker written at 1a0000.
Erasing 64 Kibyte @ 290000 - 29% complete. Cleanmarker written at 280000.
Erasing 64 Kibyte @ 370000 - 38% complete. Cleanmarker written at 360000.n at 2a0000.
Erasing 64 Kibyte @ 440000 - 48% complete. Cleanmarker written at 440000.
Erasing 64 Kibyte @ 520000 - 58% complete. Cleanmarker written at 520000.
Erasing 64 Kibyte @ 600000 - 69% complete. Cleanmarker written at 5f0000.
Erasing 64 Kibyte @ 6e0000 - 79% complete. Cleanmarker written at 6d0000.
Erasing 64 Kibyte @ 7c0000 - 89% complete. Cleanmarker written at 7b0000.00.
Erasing 64 Kibyte @ 8a0000 - 98% complete. Cleanmarker written at 890000.
autoconfig: itten at 8a------------[ cut here ]------------
kernel BUG at fs/yaffs2/yaffs_getblockinfo.h:31!
Internal error: Oops - BUG: 0 [#1] ARM
Modules linked in: vfat fat
CPU: 0 PID: 680 Comm: mount Tainted: G W 4.9.37 #1
Hardware name: Generic DT based system
task: c150e000 task.stack: c152e000
PC is at yaffs_rd_chunk_tags_nand+0xa4/0xf0
LR is at wake_up_klogd+0x3c/0x48
pc : [] lr : [] psr: 40000013
sp : c152fbc8 ip : 00000007 fp : c152fc34
r10: 00000000 r9 : 000c0000 r8 : 00000000
r7 : 00000000 r6 : 00210000 r5 : c152fc60 r4 : c1570000
r3 : 00000000 r2 : 00000000 r1 : c05223a8 r0 : 00000037
Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 10c53c7d Table: 415b8059 DAC: 00000055
Process mount (pid: 680, stack limit = 0xc152e208)
Stack: (0xc152fbc8 to 0xc1530000)
fbc0: c0166ae0 00000021 0000000c 00000000 c152fbf4 c152fbe8
fbe0: c0082a70 c006ef70 c152fc1c c152fbf8 c009b788 c0082a58 c1570000 c1fc2900
fc00: 00000020 c1fc28f8 00000021 0000000c c152fc34 4e35c179 c1570000 c1fc2900
fc20: 00000020 c1fc28f8 c152fcdc c152fc38 c0173398 c016da84 00210000 ffffffe1
fc40: c1700000 c1700000 00010000 ffffffe1 00000000 00000000 c054169e 00000020
fc60: 00000000 60000013 00000000 00000000 c0166ae0 c1570000 c1fc2900 00000020
fc80: c05286c0 00000021 00000008 c1fc2700 c152fcdc c152fca0 c01ba8b8 c01ba760
fca0: c04923b2 c1fc27b0 c1fc2708 4e35c179 c0065e30 c1570000 c1fc2900 00000000
fcc0: 00000000 00000021 c1fc28f8 00000000 c152fda4 c152fce0 c01721cc c01732cc
fce0: 00000000 c1c01f00 02400040 60000013 000000fc c1fc2800 0000001f 00000001
fd00: 00000000 0000001f c016fb04 c1fc2700 65d4bb90 00000020 00000002 c0166ae0
fd20: c152fd20 c152fd20 c1570000 c15a3300 c15a3300 c15a3388 c15a3300 c15a3388
fd40: c1570000 00000000 c152fd74 c152fd58 c15a3300 c15a3388 00000001 00000000
fd60: 000000fc 0000000a c152fd8c c152fd78 c01675e4 4e35c179 c1570000 c1570000
fd80: 00000000 00000001 00000000 000000fc 0000000a 02400040 c152fdd4 c152fda8
fda0: c016c538 c0171e5c f0000010 c1570000 c15aec00 c05286bc c159f800 00000000
fdc0: c1f90000 00000002 c152fe6c c152fdd8 c0166010 c016bfb4 c152fdfc c152fde8
fde0: c004b3e0 00000001 c15aee9c 00000000 00000000 00000000 00000000 00000000
fe00: 00000000 00000000 00000000 00000000 00000000 00000000 6d0a5f5c 6c62636d
fe20: 3270306b ffffff00 ffff0a00 4e35c179 c152fe6c c15aec00 c1803a80 4e35c179
fe40: 00000083 c15aec00 c1803a80 00008010 00000083 00000000 c1803ae8 00000000
fe60: c152fe7c c152fe70 c0166294 c0165b4c c152feac c152fe80 c00a61f8 c0166284
fe80: c1803a80 c007f408 c0162ea8 c05287e0 c05287e0 c15c8a80 00000000 c15c8a40
fea0: c152fec4 c152feb0 c0162ec4 c00a60bc c0166278 c007f394 c152feec c152fec8
fec0: c00a6ba0 c0162eb4 c05287e0 c05287e0 00008010 c152ccc0 c05287e0 00008010
fee0: c152ff14 c152fef0 c00bf434 c00a6b90 c05287e0 00000020 00008010 c15c8a80
ff00: 00008010 c15c8a40 c152ff74 c152ff18 c00c1bb4 c00bf3ec 00000000 00000000
ff20: 0000000f c007f5b8 0000000f c14ed550 c191d000 00000015 c152ff64 c152ff48
ff40: c007f6b4 4e35c179 beba5f3f beba5f3f c15c8a40 c15c8a80 00000000 00008010
ff60: c152e000 00000000 c152ffa4 c152ff78 c00c2070 c00c1400 00000000 00000000
ff80: c000f164 00000000 beba5d4c 00000000 00000015 c000f164 00000000 c152ffa8
ffa0: c000efc0 c00c2000 00000000 beba5d4c beba5f30 beba5f3f 7f68cee0 00008010
ffc0: 00000000 beba5d4c 00000000 00000015 00000000 7f68c5c0 00000000 ffffffff
ffe0: b6fe0470 beba5be4 7f6243d3 b6f9530c 20000030 beba5f30 00000000 00000000
Backtrace:
[] (yaffs_rd_chunk_tags_nand) from [] (yaffs_summary_read+0xd8/0x28c)
r7:c1fc28f8 r6:00000020 r5:c1fc2900 r4:c1570000
[] (yaffs_summary_read) from [] (yaffs2_scan_backwards+0x37c/0xdc0)
r10:00000000 r9:c1fc28f8 r8:00000021 r7:00000000 r6:00000000 r5:c1fc2900
r4:c1570000
[] (yaffs2_scan_backwards) from [] (yaffs_guts_initialise+0x590/0x74c)
r10:02400040 r9:0000000a r8:000000fc r7:00000000 r6:00000001 r5:00000000
r4:c1570000
[] (yaffs_guts_initialise) from [] (yaffs_internal_read_super.constprop.0+0x4d0/0x70c)
r10:00000002 r9:c1f90000 r8:00000000 r7:c159f800 r6:c05286bc r5:c15aec00
r4:c1570000 r3:f0000010
[] (yaffs_internal_read_super.constprop.0) from [] (yaffs2_internal_read_super_mtd+0x1c/0x2c)
r10:00000000 r9:c1803ae8 r8:00000000 r7:00000083 r6:00008010 r5:c1803a80
r4:c15aec00
[] (yaffs2_internal_read_super_mtd) from [] (mount_bdev+0x148/0x180)
[] (mount_bdev) from [] (yaffs2_mount+0x1c/0x28)
r9:c15c8a40 r8:00000000 r7:c15c8a80 r6:c05287e0 r5:c05287e0 r4:c0162ea8
[] (yaffs2_mount) from [] (mount_fs+0x1c/0x9c)
[] (mount_fs) from [] (vfs_kern_mount+0x54/0xd8)
r6:00008010 r5:c05287e0 r4:c152ccc0
[] (vfs_kern_mount) from [] (do_mount+0x7c0/0xa34)
r9:c15c8a40 r8:00008010 r7:c15c8a80 r6:00008010 r5:00000020 r4:c05287e0
[] (do_mount) from [] (SyS_mount+0x7c/0xa4)
r10:00000000 r9:c152e000 r8:00008010 r7:00000000 r6:c15c8a80 r5:c15c8a40
r4:beba5f3f
[] (SyS_mount) from [] (ret_fast_syscall+0x0/0x34)
r8:c000f164 r7:00000015 r6:00000000 r5:beba5d4c r4:00000000
Code: e3130101 0a000001 e59f0048 ebfbe0b5 (e7f001f2)
---[ end trace 8ef6351c1d11e45c ]---
Erasing 64 Kibyte @ 8b0000 - 100% complete.
Segmentation fault
Starting network...
ip: SIOCGIFINDEX: No such device
Starting ntpd: OK
Starting dropbear sshd: OK
Production mode
jffs2: notice: (713) jffs2_get_inode_nodes: Node header CRC failed at 0x890f70. {ffff,ffff,ffffffff,ffffffff}
jffs2: Node totlen on flash (0xffffffff) != totlen from node ref (0x00000090)
jffs2: warning: (713) jffs2_do_read_inode_internal: no data nodes found for ino #15
jffs2: iget() failed for ino #15
sed: /etc/httpd.conf: I/O error
Starting httpd: OK
jffs2: warning: (716) jffs2_get_inode_nodes: Eep. No valid nodes for ino #15.
jffs2: warning: (716) jffs2_do_read_inode_internal: no data nodes found for ino #15
jffs2: iget() failed for ino #15
Starting mini-snmpd: DISABLED, OK
Starting telnetd: DISABLED, OK
Starting crond: OK
jffs2: notice: (728) jffs2_get_inode_nodes: Node header CRC failed at 0x890b80. {ffff,ffff,ffffffff,ffffffff}
jffs2: Node totlen on flash (0xffffffff) != totlen from node ref (0x00000044)
jffs2: warning: (728) jffs2_do_read_inode_internal: no data nodes found for ino #12
jffs2: iget() failed for ino #12
Loading of kernel modules...
mmz_start: 0x42300000, mmz_size: 29M
hisilicon: Get data from environment and set SENSOR as jxf22
insert audio
Starting telegram-bot.sh: OK
hisilicon: Loading video system has started...
Starting majestic: OK
Stopping automatic night mode changer: FAIL
Stopping majestic: OK
Stopping telegram-bot.sh: start-stop-daemon: warning: killing process 871: No such process
FAIL
Stopping crond: OK
Stopping telnetd: DISABLED, FAIL
Stopping mini-snmpd: DISABLED, start-stop-daemon: warning: killing process 720: No such process
FAILro
Production mode
sed: /etc/httpd.conf: I/O error
Stopping httpd: start-stop-daemon: warning: killing process 716: No such process
FAIL
Stopping dropbear sshd: OK
Stopping ntpd: OK
Stopping network...
ifdown: interface eth0 not configured
Usage: /etc/init.d/S40mdev {start}
Usage: /etc/init.d/S30customizer {start}
Stopping rngd: FAIL
Stopping klogd: OK
Stopping syslogd: OK
Seeding 2048 bits without crediting
Saving 2048 bits of creditable seed for next boot
Stopping automatic LED control: FAIL
umount: can't unmount /: Resource busy
umount: can't unmount /dev: Resource busy
The system is going down NOW!
Sent SIGTERM to all processes
Hi,
I have an issue with flashing due to : https://github.com/OpenIPC/firmware/blob/master/ATTENTION.md
I cannot find the May 1st 2023 firmware because their telegram channel delete messages after 6 months.
Regards, Rémy.
Hi,
I tried to install this software, unfortunately when trying to upload u-boot-hi3518ev300-universal.bin to fastboot I get an error:
##################################################### ---- 10%
################################################### ---- 20%
################################################### ---- 30%
################################################### ---- 40%
################################################### ---- 50%
################################################### ---- 60%
################Failed to send data frame, check that the serial port is normal.
Failed to download File!
Please check if the boot is correct!
Failed to download fastboot!
USB channels were closed successfully.
When I use https://kasito.ru/wp-content/uploads/2021/03/uboot_patcher.zip is working fine
ONVIF is getting disabled on every reboot.
Hello,
I tried to configure the MQTT client to send motion detection events on Scrypted.
When I am clicking the button to send a MQTT message on the preview page, nothing happens on the MQTT network.
I tried manually sending a payload with the same parameters thru the console and it works.
Any idea ?
the autonight script doesn't seems to work right, when changing a setting and majestic restarts. it stays in day mode, but the cam was in a dark room.
This my configuration
system:
buffer: 1024
staticDir: /var/www/majestic
webAdmin: disabled
webPort: 90
isp:
iqProfile: /etc/sensors/iq/f23.ini
image:
mirror: true
flip: true
rotate: none
contrast: 50
hue: 50
saturation: 50
luminance: 50
osd:
enabled: true
template: "OpenIPC v.2.2 | %F %T %Z"
nightMode:
enabled: true
irCutPin1: 70
irCutPin2: 68
backlightPin: 54
dncDelay: 6
nightAPI: true
irSensorPinInvert: true
records:
enabled: true
path: /mnt/mmcblk0p2/%Y/%m/%d/%H/%M.mp4
maxUsage: 95
video0:
enabled: true
codec: h264
video1:
enabled: false
jpeg:
enabled: true
mjpeg:
size: 640x360
fps: 5
bitrate: 2048
audio:
enabled: true
volume: 70
srate: 8000
codec: pcm
outputEnabled: true
speakerPin: 55
speakerPinInvert: false
voiceEqualizer: common
rtsp:
enabled: true
port: 554
hls:
enabled: false
youtube:
enabled: false
motionDetect:
enabled: true
visualize: true
debug: true
ipeye:
enabled: false
netip:
enabled: false
user: admin
password: 12345
port: 34567
snapshots: true
ignoreSetTime: false
onvif:
enabled: false
watchdog:
enabled: true
timeout: 30
Hi,
I have made some tests and so far so good, this new firmware is very nice.
However a feature is still missing : the human detection (or I cannot find this) like in the previous custom firmware.
Is it possible to have these feature ? with a custom sensiitivity ?
Thanks for all your work guys.
I flashed this firmware on mine mjsxj02hl. I can access to openipc dashboard and activate all features but camera very high memory and it's unusable mostly after connected to rtsp stream ; main scope for me is use it as rtsp camera for frigate , but it's very unusable.
Any suggestions ? Thanks !
После перезагрузки камеры через раздел Reset в WebUI камера проходит инициализацию (по светодиодам - сначала оранжевый, затем - голубой), слышен щелчок объектива, но к Wi-Fi она не подключается пока физически не отключишь питание и не включишь обратно.
P. S. При перезагрузке по требованию, когда появляется соответствующая плашка камера перезагружается и работает как надо.
Hello,
I am unable to flash u-boot-hi3518ev300-universal.bin
`##################################################### ---- 10%
################################################### ---- 20%
################################################### ---- 30%
################################################### ---- 40%
################################################### ---- 50%
################################################### ---- 60%
################################################### ---- 70%
################################################### ---- 80%
################################################### ---- 90%
################################################### ---- 100%
Boot download completed!
Failed to wait boot running!
There may be no boot on the board.
Please check if the boot is correct!
Failed to download fastboot!
USB channels were closed successfully.
`
If I try to flash uboot.bin from https://kasito.ru/wp-content/uploads/2021/03/uboot_patcher.zip it works fine but as I understand it is incompatible with OpenIPC firmware.
So it doesn't look like it's camera hardware issue (memory) because it only happens with u-boot-hi3518ev300-universal.bin
How it is possible to fix this?
Thanks.
stuck in fast blinking orange.
unable to flash fastboot,
################################################ ---- 100%
Boot download completed!
Failed to wait boot running!
There may be no boot on the board.
Please check if the boot is correct!
Failed to download fastboot!USB channels were closed successfully.
what can we do from here?
Hi
I used legacy firmware previously with MQTT features (great)
Yet I installed new OpenIPC firmware and there seems to be no MQTT feature, could you please enable it ?
Thanks
Hi,
I have had a lot of problems with flashing. Here are a few problems:
When I flash with the SD-Card, it first lights up in orange, and a few seconds later to white for 1-2 minutes. After that time the light turns off, there is no "shutter" sound and then after 1-2 minutes it enters a bootloop (Orange and Black lights).
I have tried multiple SD-Cards, and sometimes I was succesfull with flashing, BUT then the device would not open a port nor would have a stable connection with my router (yes, I am close to it).
What am I doing wrong? Did Xiaomi change something about their camera?
Thank you for your help!
Hi,
I do the installation steps without worries (driver with Zadig, flash with HiTool)
But as soon as I put the SD card (with the contents of the flash folder in the root),
the LED is white for 1-2 minutes, then alternates between orange and black).
I can't hear the shutter click.
The smallest SD card I have is 16GB. So I made 2 partitions of 1Go. I tested in FAT32, FAT and exFAT but still the same thing.
Between each test I reflashed with HiTool
Any idea please?
thanks in advance
Hello,
I'm completely at ease with a completely black image when I'm in night mode. I have the impression that the infrareds are not triggered. When I switch from day mode to night mode, I can briefly see a decent image but then it disappears. I must be configuring something wrong. Could you please help me?
Here is my config :
system:
buffer: 1024
staticDir: /var/www/majestic
isp:
iqProfile: /etc/sensors/iq/f23.ini
image:
mirror: true
flip: true
rotate: none
contrast: 50
hue: 50
saturation: 50
luminance: 50
osd:
enabled: false
template: "OpenIPC v.2.2 | %F %T %Z"
nightMode:
enabled: true
irCutPin1: 70
irCutPin2: 68
backlightPin: 54
dncDelay: 6
nightAPI: false
irSensorPinInvert: false
irCutSingleInvert: false
records:
enabled: false
path: /mnt/mmcblk0p1/%Y/%m/%d/%H/%M.mp4
maxUsage: 95
video0:
enabled: true
codec: h264
video1:
enabled: false
jpeg:
enabled: true
mjpeg:
size: 640x360
fps: 5
bitrate: 2048
audio:
enabled: true
volume: 70
srate: 8000
codec: pcm
outputEnabled: true
speakerPin: 55
speakerPinInvert: false
voiceEqualizer: common
rtsp:
enabled: true
port: 554
hls:
enabled: false
youtube:
enabled: false
motionDetect:
enabled: false
visualize: true
debug: true
ipeye:
enabled: false
netip:
enabled: false
user: admin
password: 12345
port: 34567
snapshots: true
ignoreSetTime: false
onvif:
enabled: false
watchdog:
enabled: true
timeout: 30
openipc 2.2.11.04
.osd.enabled: true
.osd.font:
.osd.template: %F %T
.osd.corner:
.osd.posX: -16
.osd.posY: -16
.osd.privacyMasks:
wahtever settings I use, the OSD is never shown.
Log from HiTool and ScreenShot
What wrong ?
```
USB channels were closed successfully.
##################################################### ---- 10%
################################################### ---- 20%
################################################### ---- 30%
################################################### ---- 40%
################################################### ---- 50%
################################################### ---- 60%
################################################### ---- 70%
################################################### ---- 80%
################################################### ---- 90%
################################################### ---- 100%
Boot download completed!
start download process.
Boot started successfully!
Send command: getinfo version
version: U-Boot 2016.11-g72db7cf-dirty
EOT
Send command: getinfo bootmode
spi
EOT
Send command: sf probe 0
EOT
Send command: getinfo spi
Block:64KB Chip:16MB*1
ID:0x1C 0x70 0x18
Name:"EN25QH128A"
EOT
Send command: sf probe 0
EOT
Send command: sf erase 0x0 0x40000
Erasing at 0x10000 -- 25% complete.
Erasing at 0x20000 -- 50% complete.
Erasing at 0x30000 -- 75% complete.
Erasing at 0x40000 -- 100% complete.
SF: 262144 bytes @ 0x0 Erased: OK
EOT
Send command: sf write 0x41000000 0x0 0x40000
device 0 offset 0x0, size 0x40000
Writing at 0x10000 -- 25% complete.
Writing at 0x20000 -- 50% complete.
Writing at 0x30000 -- 75% complete.
Writing at 0x40000 -- 100% complete.
SF: 262144 bytes @ 0x0 Written: EOT
Send command: mw.b 0x41000000 0xFF 0x1f0000
EOT
Send command: Downloading File : uImage.hi3518ev300
[Download File by usb]
file = C:\Users\Aviran&Dor\Downloads\openipc.hi3518ev300-nor-lite\uImage.hi3518ev300
address = 0x41000000
fileLength = 1999576 B
done
Send command: sf probe 0
EOT
Send command: sf erase 0x50000 0x200000
Erasing at 0x60000 -- 3% complete.
Erasing at 0x70000 -- 6% complete.
Erasing at 0x80000 -- 9% complete.
Erasing at 0x90000 -- 12% complete.
Erasing at 0xa0000 -- 15% complete.
Erasing at 0xb0000 -- 18% complete.EOT
Send command: sf write 0x41000000 0x50000 0x1f0000
device 0 offset 0x50000, size 0x1f0000
Writing at 0x60000 -- 3% complete.
Writing at 0x70000 -- 6% complete.
Writing at 0x80000 -- 9% complete.
Writing at 0x90000 -- 12% complete.
Writing at 0xa0000 -- 16% complete.EOT
Partition kernel burnt successfully!
Send command: mw.b 0x41000000 0xFF 0x500000
EOT
Send command: Downloading File : rootfs.squashfs.hi3518ev300
[Download File by usb]
file = C:\Users\Aviran&Dor\Downloads\openipc.hi3518ev300-nor-lite\rootfs.squashfs.hi3518ev300
address = 0x41000000
fileLength = 5230592 B
done
Send command: sf probe 0
EOT
Send command: sf erase 0x250000 0x500000
Erasing at 0x260000 -- 1% complete.
Erasing at 0x270000 -- 2% complete.
Erasing at 0x280000 -- 3% complete.
Erasing at 0x290000 -- 5% complete.
Erasing at 0x2a0000 -- 6% complete.
Erasing at 0x2b0000 -- 7% complete.EOT
Send command: sf write 0x41000000 0x250000 0x500000
device 0 offset 0x250000, size 0x500000
Writing at 0x260000 -- 1% complete.
Writing at 0x270000 -- 2% complete.
Writing at 0x280000 -- 3% complete.
Writing at 0x290000 -- 5% complete.
Writing at 0x2a0000 -- 6% complete.EOT
Partition rootfs burnt successfully!
Send command: reset
reset success!
Partition burnt completed!
Hi,
I tried to install OpenIPC but I am stuck on step 2.
The device is only visible a second or less in my OS, and I obviously dont have time to install the driver correctly.
Any tip ?
Must press the reset button until when ?
Thanks
Как добавить функционал mqtt в homeassistant? На предыдущей прошивке достаточно было указать данные брокера и камера успешно добавлялась в mqtt с Motion функционалом.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.