This is a fork of node-gyp with changes to achieve greater compatibility for building native modules for nodejs-mobile.
Disclaimer: documentation found in this repository is currently unchanged from the parent repository and may only be applicable to node-gyp
.
The rest of this README
is from the original node-gyp
project's README
.
=======
node-gyp
is a cross-platform command-line tool written in Node.js for compiling
native addon modules for Node.js. It bundles the gyp
project used by the Chromium team and takes away the pain of dealing with the
various differences in build platforms.
Multiple target versions of Node.js are supported (i.e. 0.8
, ..., 4
, 5
, 6
,
etc.), regardless of what version of Node.js is actually installed on your system
(node-gyp
downloads the necessary development files or headers for the target version).
- Easy to use, consistent interface
- Same commands to build your module on every platform
- Supports multiple target versions of Node.js
You can install with npm
:
$ npm install -g node-gyp
You will also need to install:
python
(v2.7
recommended,v3.x.x
is not supported)make
- A proper C/C++ compiler toolchain, like GCC
python
(v2.7
recommended,v3.x.x
is not supported) (already installed on macOS)- Xcode
- You also need to install the
Command Line Tools
via Xcode. You can find this under the menuXcode -> Preferences -> Locations
(or by runningxcode-select --install
in your Terminal)- This step will install
gcc
and the related toolchain containingmake
- This step will install
- You also need to install the
Install all the required tools and configurations using Microsoft's windows-build-tools using npm install --global --production windows-build-tools
from an elevated PowerShell or CMD.exe (run as Administrator).
Install tools and configuration manually:
- Install Visual C++ Build Environment: Visual Studio Build Tools (using "Visual C++ build tools" workload) or Visual Studio 2017 Community (using the "Desktop development with C++" workload)
- Install Python 2.7 (
v3.x.x
is not supported), and runnpm config set python python2.7
(or see below for further instructions on specifying the proper Python version and path.) - Launch cmd,
npm config set msvs_version 2017
If the above steps didn't work for you, please visit Microsoft's Node.js Guidelines for Windows for additional tips.
If you have multiple Python versions installed, you can identify which Python
version node-gyp
uses by setting the '--python' variable:
$ node-gyp --python /path/to/python2.7
If node-gyp
is called by way of npm
, and you have multiple versions of
Python installed, then you can set npm
's 'python' config key to the appropriate
value:
$ npm config set python /path/to/executable/python2.7
To compile your native addon, first go to its root directory:
$ cd my_node_addon
The next step is to generate the appropriate project build files for the current
platform. Use configure
for that:
$ node-gyp configure
Auto-detection fails for Visual C++ Build Tools 2015, so --msvs_version=2015
needs to be added (not needed when run by npm as configured above):
$ node-gyp configure --msvs_version=2015
Note: The configure
step looks for a binding.gyp
file in the current
directory to process. See below for instructions on creating a binding.gyp
file.
Now you will have either a Makefile
(on Unix platforms) or a vcxproj
file
(on Windows) in the build/
directory. Next, invoke the build
command:
$ node-gyp build
Now you have your compiled .node
bindings file! The compiled bindings end up
in build/Debug/
or build/Release/
, depending on the build mode. At this point,
you can require the .node
file with Node.js and run your tests!
Note: To create a Debug build of the bindings file, pass the --debug
(or
-d
) switch when running either the configure
, build
or rebuild
commands.
A binding.gyp
file describes the configuration to build your module, in a
JSON-like format. This file gets placed in the root of your package, alongside
package.json
.
A barebones gyp
file appropriate for building a Node.js addon could look like:
{
"targets": [
{
"target_name": "binding",
"sources": [ "src/binding.cc" ]
}
]
}
Some additional resources for addons and writing gyp
files:
- "Going Native" a nodeschool.io tutorial
- "Hello World" node addon example
- gyp user documentation
- gyp input format reference
- "binding.gyp" files out in the wild wiki page
node-gyp
responds to the following commands:
Command | Description |
---|---|
help |
Shows the help dialog |
build |
Invokes make /msbuild.exe and builds the native addon |
clean |
Removes the build directory if it exists |
configure |
Generates project build files for the current platform |
rebuild |
Runs clean , configure and build all in a row |
install |
Installs Node.js header files for the given version |
list |
Lists the currently installed Node.js header versions |
remove |
Removes the Node.js header files for the given version |
node-gyp
accepts the following command options:
Command | Description |
---|---|
-j n , --jobs n |
Run make in parallel |
--target=v6.2.1 |
Node.js version to build for (default is process.version ) |
--silly , --loglevel=silly |
Log all progress to console |
--verbose , --loglevel=verbose |
Log most progress to console |
--silent , --loglevel=silent |
Don't log anything to console |
debug , --debug |
Make Debug build (default is Release ) |
--release , --no-debug |
Make Release build |
-C $dir , --directory=$dir |
Run command in different directory |
--make=$make |
Override make command (e.g. gmake ) |
--thin=yes |
Enable thin static libraries |
--arch=$arch |
Set target architecture (e.g. ia32) |
--tarball=$path |
Get headers from a local tarball |
--devdir=$path |
SDK download directory (default is ~/.node-gyp ) |
--ensure |
Don't reinstall headers if already present |
--dist-url=$url |
Download header tarball from custom URL |
--proxy=$url |
Set HTTP proxy for downloading header tarball |
--cafile=$cafile |
Override default CA chain (to download tarball) |
--nodedir=$path |
Set the path to the node source code |
--python=$path |
Set path to the Python 2 binary |
--msvs_version=$version |
Set Visual Studio version (Windows only) |
--solution=$solution |
Set Visual Studio Solution version (Windows only) |
Use the form npm_config_OPTION_NAME
for any of the command options listed
above (dashes in option names should be replaced by underscores).
For example, to set devdir
equal to /tmp/.gyp
, you would:
Run this on Unix:
$ export npm_config_devdir=/tmp/.gyp
Or this on Windows:
> set npm_config_devdir=c:\temp\.gyp
Use the form OPTION_NAME
for any of the command options listed above.
For example, to set devdir
equal to /tmp/.gyp
, you would run:
$ npm config set [--global] devdir /tmp/.gyp
Note: Configuration set via npm
will only be used when node-gyp
is run via npm
, not when node-gyp
is run directly.
node-gyp
is available under the MIT license. See the LICENSE
file for details.