A set of python scripts to display replica near real-time UK railway station departure data on SSD1322-based 256x64 SPI OLED screens. Uses the publicly available Transport API. This project has been developed and simplified based on the work of others to run on the balenaCloud platform.
A Dockerfile template is included in order to run this project on the balenaCloud platform.
To use this project, sign up, add an application and device as per the getting started guide. Then use the balena CLI to push the project to your Pi.
This allows you to easily deploy multiple devices and configure them from the dashboard with the following variables which will then automatically generate the config.json file required.
There is also a full writeup on the balena blog.
Sign up for the Transport API, and generate an app ID and API key (note the free tier has 1000 request a day).
These environment variables are specified using the balenaCloud dashboard, allowing you to set up mutiple signs in one application for different stations.
| Key | Example Value |
|---|---|
TZ |
Europe/London (timezone) |
departureStation |
PAD (station code) |
outOfHoursName |
London Paddington (name shown when current time is outside the transportApi_operatingHours) |
refreshTime |
120 (seconds between data refresh) |
transportApi_apiKey |
798c7ddfdeadbeef87987e9a8e79 (transport API key) |
transportApi_appId |
12345678 (transport API application ID) |
transportApi_operatingHours |
8-22 (hours during which the data will refresh at the interval above) |
This project (without modification) requires the use of a SSD1322-based 256x64 SPI display, an OLED in yellow for the authentic look. I have used displays from AliExpress successfully.
The connections for one of these displays to the Raspberry Pi GPIO header are as follows, but it would be a good idea to check the connections with the datasheet of your particilar display before powering on as there's no guarantee yours will match the pinout of mine.
| Display | Connection | Raspberry Pi |
|---|---|---|
| 1 | Ground | 6 (Ground) |
| 2 | V+ (3.3V) | 1 (3v3 Power) |
| 4 | D0/SCLK |
23 (BCM11 SCLK) |
| 5 | D1/SDIN |
19 (BCM10 MOSI) |
| 14 | DC (data/command select) |
18 (BCM24) |
| 15 | RST (reset) |
22 (BCM25) |
| 16 | CS (chip select) |
24 (BCM8 CE0) |
A big thanks to Chris Hutchinson who originally started this project and inspired me to develop it further. Blake made some further improvements and this project was forked from there.
The fonts used were painstakingly put together by DanielHartUK and can be found on GitHub at https://github.com/DanielHartUK/Dot-Matrix-Typeface - A huge thanks for making that resource available!
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent