Coder Social home page Coder Social logo

Comments (18)

GoogleCodeExporter avatar GoogleCodeExporter commented on August 21, 2024
I have just installed a Fresh 3.1.0.1 ROM for Froyo 2.2 and my wired tether is 
not working as well.  I also have the Evo and tried installing the custom build 
wired-tether attached on the xda site.  I receive the same unsupported kernel 
message.

Original comment by [email protected] on 3 Aug 2010 at 7:57

from android-wired-tether.

GoogleCodeExporter avatar GoogleCodeExporter commented on August 21, 2024
Temporary solution found.  I'm using netarchy's "final" rooted OTA froyo update 
along with his kernel designed for 2.2.  Wired tether is now working again. 
(supposedly, wireless tether should work too).

Original comment by [email protected] on 3 Aug 2010 at 8:03

from android-wired-tether.

GoogleCodeExporter avatar GoogleCodeExporter commented on August 21, 2024
I installed netarchy's final rooted OTA kernel as well, but it's still not 
working. Ubuntu (well network manager) doesn't see it at all.

Original comment by [email protected] on 5 Aug 2010 at 1:42

from android-wired-tether.

GoogleCodeExporter avatar GoogleCodeExporter commented on August 21, 2024
Ditto to what jjwalker77 said...  Not working with fresh or the stock htc 
provided version of froyo...  Haven't tried any other roms.

Original comment by [email protected] on 5 Aug 2010 at 2:04

from android-wired-tether.

GoogleCodeExporter avatar GoogleCodeExporter commented on August 21, 2024
I love wired tether, and really rely on it sometimes, but not working with new 
froyo update. Wireless tether has been updated to 2.05pre7 and now works 
without using netarchys custom kernel. That kernel breaks 8mp camera down to 
3mp, I don't wanna use it. I don't know who the dev for this is, but any chance 
of this being updated to work with stock Evo 2.2 kernel? Would gladly donate, 
if that makes any difference. Only been one day, and I already miss it and may 
flash back to 1.47. Thanks in advance to anyone lookin into this. 

Original comment by [email protected] on 7 Aug 2010 at 10:18

from android-wired-tether.

GoogleCodeExporter avatar GoogleCodeExporter commented on August 21, 2024
Wired tether on my EVO with 2.1 worked very good, but is now not working at all 
with a rooted 2.2 and that was my only Internet. Sure I tried the wireless 
version, but it is unreliable, meaning it eventually stops transferring so I 
have to restart the wireless tether. I loved wired tether so much I am 
SERIOUSLY thinking of downgrading to 2.1

Original comment by [email protected] on 9 Aug 2010 at 1:09

from android-wired-tether.

GoogleCodeExporter avatar GoogleCodeExporter commented on August 21, 2024
A fix for this would be awesome. I get a kernel not supported error when trying 
to run any of these versions. 

Original comment by [email protected] on 15 Aug 2010 at 1:33

from android-wired-tether.

GoogleCodeExporter avatar GoogleCodeExporter commented on August 21, 2024
@ingenium - Did you try the following trick on your phone before starting the 
wired tether?

echo 0 > /sys/devices/platform/msm_hsusb/usb_function_switch

This will only work if you are using an older kernel with 2.2 (like netarchy's)

Original comment by [email protected] on 15 Aug 2010 at 2:55

from android-wired-tether.

GoogleCodeExporter avatar GoogleCodeExporter commented on August 21, 2024
I just wanted to toss this out there to say that USB tethering is definitely 
possible with the stock FroYo Evo kernel, as I'm on it right now.

I wasn't able to do it easily (by just clicking the start tethering button), 
but I think I'm on the right track now at least.  I have some investigating to 
do when I have time (hopefully tomorrow), but hopefully I can make some 
progress soon.

Stay tuned!

Original comment by [email protected] on 17 Aug 2010 at 4:50

from android-wired-tether.

GoogleCodeExporter avatar GoogleCodeExporter commented on August 21, 2024
I've narrowed down what needs to occur to make this work on the FroYo Evo 
kernel, so I'm now working with Harald to get a change patched in.  Update 
should be forthcoming.

Original comment by [email protected] on 17 Aug 2010 at 2:42

from android-wired-tether.

GoogleCodeExporter avatar GoogleCodeExporter commented on August 21, 2024
We're currently testing a fix for this, which should arrive soon (some may have 
it in an experimental stage currently -- check issue 24 for more information as 
well).

Original comment by [email protected] on 17 Aug 2010 at 11:25

from android-wired-tether.

GoogleCodeExporter avatar GoogleCodeExporter commented on August 21, 2024
So glad to hear it. Thank you sooo much. About to test 1.3. Thank you. 

Original comment by [email protected] on 19 Aug 2010 at 11:05

from android-wired-tether.

GoogleCodeExporter avatar GoogleCodeExporter commented on August 21, 2024
Just tried to install 1.4 wired on a 2.2 ROM, the app starts up without 
complaining, however running it with usb debugging off doesn't allow my 
computer to see it.  Anyone having any luck getting this to work? I've tried 
the echo 0 > and tried it without enabling that, neither work.

Original comment by [email protected] on 21 Aug 2010 at 11:37

from android-wired-tether.

GoogleCodeExporter avatar GoogleCodeExporter commented on August 21, 2024
brhellman, which 2.2 ROM are you using -- stock, Fresh, or another?  You 
shouldn't need to do the echo 0 part -- echo 0 is equivalent to turning off all 
the usb functions (ADB, Disk Drive, Tether, etc.), 1 is Disk Drive, 2 is ADB, 3 
is Disk Drive + ADB, and 4 is Tether [you can't tether and use ADB/Disk Drive 
at the same time] -- the correct version of this is built-in with 1.3 and 1.4.  
However, there is a patch or two you need to apply through a custom recovery to 
fix things: 
http://code.google.com/p/android-wired-tether/issues/detail?id=24#c37

Original comment by [email protected] on 22 Aug 2010 at 12:40

from android-wired-tether.

GoogleCodeExporter avatar GoogleCodeExporter commented on August 21, 2024
dlightle, This is on Franken ROM, a modified EVO ROM, using the HydraKernel, 
the dev says all the features required are in it as it's just a modified stock 
kernel. http://hydrakernel.cz.cc/

Thanks for the help. 

Original comment by [email protected] on 25 Aug 2010 at 4:11

from android-wired-tether.

GoogleCodeExporter avatar GoogleCodeExporter commented on August 21, 2024
brhellman, can you contact me by email?  I'll try to have you do some checking 
for your specific ROM and kernel.  Both that ROM and kernel are ones I haven't 
seen others using or reporting on, so there's a chance something is different, 
though I don't know for sure what it would be since you said they're both based 
on stock at least.

Original comment by [email protected] on 25 Aug 2010 at 4:59

from android-wired-tether.

GoogleCodeExporter avatar GoogleCodeExporter commented on August 21, 2024
I have read just about every post in multiple forums, I still cant get 
android-wired-tether to work on the latest Fresh 2.2 ROM. I am about to give 
up, is there a definite answer/method for getting it to work??? (with all the 
necessary info in one location/post)
Signed, Frustrated JJ

Original comment by [email protected] on 16 Sep 2010 at 4:51

from android-wired-tether.

GoogleCodeExporter avatar GoogleCodeExporter commented on August 21, 2024
I am having the same problem, pcs error 67 on stock EVO 2.2 Rom, rooted.

Original comment by [email protected] on 9 Jun 2011 at 2:07

from android-wired-tether.

Related Issues (20)

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.