nikkadim / lightcrafter4500

DLP LightCrafter 4500 Command Line

LightCrafter4500

DLP LightCrafter 4500 Command Line for Windows

Source code to create a simple command line control program for the TI DLP LightCrafter 4500. Using the HDMI input as the image source, this source switches into a 180Hz 7-bit per plane with various options to control the LEDs. It can be easily extended to initialize the device into other modes.

usage: LCr4500Init --color [RGB|R|B|G|W] --mode [video|structuredlight|reset|powerdown|powerup|noChange] 
  --status --version
   
   no parameters is same as --color W --mode structuredlight
   parameters can be abbreviated to a single character, unless first character options are not unique

Examples:

LCr4500Init --color rgb --mode video  

Same state as if the device just powered on (video processing RGB output).

LCr4500Init --color r --mode stucturedlight  

180Hz refresh, each 7-bit color plane is interpreted as a separate image. Planes are presented in the sequence GRB. Only use the Red output LED.

LCr4500Init --color w --mode stucturedlight  

180Hz refresh, each 7-bit color plane is interpreted as a separate image. Turn on all three LEDs for each color plane.