nickp60 / amphora2 Goto Github PK
View Code? Open in Web Editor NEWThis project forked from wu-lab-uva/amphora2
An Automated Phylogenomic Inference Pipeline for Bacterial and Archaeal Sequences.
This project forked from wu-lab-uva/amphora2
An Automated Phylogenomic Inference Pipeline for Bacterial and Archaeal Sequences.
AMPHORA2 User Manual An Automated Phylogenomic Inference Pipeline for Bacterial and Archaeal Sequences. COPYRIGHT 2011 by Martin Wu AMPHORA2 is free software: you may redistribute it and/or modify its under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or any later version. AMPHORA2 is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details (http://www.gnu.org/licenses/). For any other inquiries send an Email to Martin Wu: [email protected] CITATION When publishing work that is based on the results from AMPHORA2 please cite: Wu M, Scott AJ. Phylogenomic analysis of bacterial and archaeal sequences with AMPHORA2. Bioinformatics 2012; 28(7):1033-1034. DEPENDENCY AMPHORA2 depends on several external programs. 1. HMMER3 (http://hmmer.janelia.org/). Required for marker identification, sequence alignment and trimming. Earlier versions of HMMER will not work! 2. RAxML version 7.3.0 or later (https://github.com/stamatak/standard-RAxML/downloads). Required for phylotyping. 3. Bioperl 1.5.2 or later (http://www.bioperl.org/wiki/Getting_BioPerl). 4. EMBOSS (http://emboss.sourceforge.net/download/). The 'getorf' program of the EMBOSS package is required only if you analyze DNA sequences using AMPHORA2 Make sure that these programs are installed and are in your system's executable search path. To test, in a terminal type raxmlHPC -version raxmlHPC-PTHREADS -version hmmsearch -h hmmalign -h getorf -help If you see version or help messages, then these programs have been correctly installed. It is important to make sure they are the correct versions. A script named 'preinstall.pl' is also included with AMPHORA2 to check and install the dependencies automatically. You need the privilege of the system administrator to run the script. See below for instructions. INSTALLATION 1.Download AMPHORA2 2.Unpack AMPHORA2 tar -zxvf AMPHORA2.tar.gz 3.Install dependencies if they have not been installed cd AMPHORA2 sudo perl preinstall.pl 4.Setup AMPHORA2. You need to set up the environment variable 'AMPHORA2_home' so the AMPHORA2 scripts know where to look for the phylogenetic marker database and the NCBI taxonomy information. Let's suppose your unpacked AMPHORA folder is at /home/foo/AMPHORA2. If you are using a bash shell, you can add the following lines to the end of the file ~/.bashrc export AMPHORA2_home=/home/foo/AMPHORA2 Then in the terminal, issue this command source ~/.bashrc If you are using a C shell, you can add the following lines to the end of the file ~/.tcshrc. setenv AMPHORA2_home /home/foo/AMPHORA2 Then in the terminal, issue this command source ~/.tcshrc 5.Make the AMPHORA2 scripts executable. chmod +x /home/foo/AMPHORA2/Scripts/* You should see five folders. 1. Marker This folder contains a seed alignment file in Stockholm format (*.stock), an alignment mask file (*.mask), a profile HMM file (*HMM) and a tree file in newick format (*.tre) for each marker gene. For more information about the phylogenetic markers that are included in AMPHORA2, see the marker.list file in the Marker folder. 2. Scripts This folder contains the scripts for marker identification, alignment, trimming and phylotyping. 3. Taxonomy This folder contains the NCBI taxonomy database that is used by the Phylotyping.pl script for phylotyping. 4. Tree This folder contains the bacterial and arachaeal genome trees in newick format. The genome trees are RAxML maximum likelihood trees made from concatenated protein sequences. 5. TestData This folder contains the E. coli genome assembly (ecoli.fasta) and proteome sequences (ecoli.pep) for testing AMPHORA2. RUNNING AMPHORA2 1. Marker identification Use MarkerScanner.pl to identify bacterial and/or archaeal marker sequences. Given a sequence file, this program will identify markers from the input sequences and generate a protein fasta file for each marker gene in your working directory. For example, rpoB.pep, rpsJ.pep. When DNA input sequences are used, this program first identifies ORFs longer than 100 bp in all six reading frames, then scans the translated peptide sequences for the phylogenetic markers. perl MarkerScanner.pl sequence-file Options: -DNA: input sequences are DNA. Default: no. -Evalue: HMMER evalue cutoff. Default: 1e-3 -Bacteria: input sequences are Bacterial sequences -Archaea: input sequences are Archaeal sequences -ReferenceDirectory: the file directory that contain the reference alignments, hmms and masks. Default: /home/foo/AMPHORA2/Marker -Help: print help Example: 1a. Identify phylogenetic markers from the E. coli proteome. perl MarkerScanner.pl –Bacteria TestData/ecoli.pep 1b. Identify phylogenetic markers from the E. coli genome assembly perl MarkerScanner.pl -Bacteria -DNA TestData/ecoli.fasta If AMPHORA2 has been installed correctly, at the end of the run for example 1a or 1b, you should see 31 marker protein sequences (*.pep) in your working directory. 1c. If you want to identify phylogenetic markers from metagenomic sequence reads (e.g., 454 reads) of a mixed bacterial and archaeal population, perl MarkerScanner.pl -DNA metagenomic.fasta However, if you know your input sequences only contain bacterial or archaeal sequences, then use the -Bacterial or -Archaeal option. This makes the AMPHORA2 run faster and the results will be more accurate. 2. Marker sequence alignment and trimming This program will align, mask and trim the marker protein sequences. Output will be aligned/trimmed sequences. For example, rpoB.aln, rpsJ.aln and their corresponding alignment masks. The alignment masks can be used to weigh the alignment columns with the RAxML's -a option (for untrimmed alignment only). perl MarkerAlignTrim.pl Options: -Trim: trim the alignment using masks embedded with the marker database. Default: no -Cutoff: the Zorro masking confidence cutoff value (0 - 1.0; default: 0.4); -ReferenceDirectory: the file directory that contain the reference alignments, hmms and masks. Default: /home/foo/AMPHORA2/Marker -Directory: the file directory where sequences to be aligned are located. Default: current directory -OutputFormat: output alignment format. Default: phylip. Other supported formats include: fasta, stockholm, selex, clustal -WithReference: keep the reference sequences in the alignment. Default: no -Help: print help Example: perl MarkerAlignTrim.pl -WithReference -OutputFormat phylip If AMPHORA2 has been installed correctly, at the end of the run, you should see an alignment file (*.aln) and a mask file (*.mask) for each of the 31 ecoli marker proteins in your working directory. It is important to know that in order to run the Phylotyping.pl script properly, the MarkerAlignTrimp.pl needs to be run using '-WithReference -OutputFormat phylip' options. 3. Phylotyping Use Phylotyping.pl to assign phylotypes for each identified marker sequences. This program will assign each identified marker sequence a phylotype using parsimony method or the evolutionary placement algorithm of RAxML. The marker sequences need to be aligned first with the reference sequences using MarkerAlignTrim.pl (see above). The alignments should be in the phylip format. perl Phylotyping.pl Options: -Method: use 'maximum likelihood' (ml) or 'maximum parsimony' (mp) for phylotyping. Default: ml -CPUs: turn on the multiple thread option and specify the number of CPUs/cores to use. Important: Make sure raxmlHPC-PTHREADs is installed. If the number specified here is larger than the number of cores that are free and available, it will actually slow down the script. -Help: print help; Example: assign phylotypes using the maximum likelihood method perl Phylotyping.pl -CPUs 6 > phylotype.result Again, if AMPHORA2 is installed correctly, you should see something like this as the output: Query Marker Superkingdom Phylum Class Order Family Genus Species NP_417776-NC_000913 rplB Bacteria(0.96) Proteobacteria(0.96) Gammaproteobacteria(0.96) Enterobacteriales(0.96) Enterobacteriaceae(0.96) Escherichia(0.50) Escherichia coli(0.48) NP_417097-NC_000913 rplS Bacteria(0.96) Proteobacteria(0.96) Gammaproteobacteria(0.96) Enterobacteriales(0.96) Enterobacteriaceae(0.96) Escherichia(0.80) Escherichia coli(0.80) NP_414711-NC_000913 rpsB Bacteria(0.96) Proteobacteria(0.96) Gammaproteobacteria(0.96) Enterobacteriales(0.96) Enterobacteriaceae(0.96) Escherichia(0.80) Escherichia coli(0.78) The phylotyping results are tab-delimited. The numbers within the parentheses are the confidence scores of the assignment. If you see the following error message when you run Phylotyping.pl, you can delete the 'name2id' file in the folder AMPHORA2_home/Taxonomy/ and run the script again. ------------- EXCEPTION: Bio::Root::Exception ------------- MSG: No such file or directory AMPHORA2_home/Taxonomy/names2id STACK: Error::throw STACK: Bio::Root::Root::throw /lib/site_perl/5.16.3/Bio/Root/Root.pm:368 STACK: Bio::DB::Taxonomy::flatfile::_db_connect /lib/site_perl/5.16.3/Bio/DB/Taxonomy/flatfile.pm:463 STACK: Bio::DB::Taxonomy::flatfile::new /lib/site_perl/5.16.3/Bio/DB/Taxonomy/flatfile.pm:144 STACK: Bio::DB::Taxonomy::new /lib/site_perl/5.16.3/Bio/DB/Taxonomy.pm:116 STACK: AMPHORA2_home/Scripts/Phylotyping.pl:58 KNOWN ISSUES Bioperl AMPHORA2 has been tested on Bioperl 1.6.1. People have reported problems running AMPHORA2 on Bioperl 1.6.9. For example, the following error has been reported when running Phylotyping.pl: ------------- EXCEPTION: Bio::Root::Exception ------------- MSG: parse error: expected ; or ) or , STACK: Error::throw STACK: Bio::Root::Root::throw /usr/local/share/perl/5.14.2/Bio/Root/Root.pm:472 STACK: Bio::TreeIO::NewickParser::parse_newick /usr/local/share/perl/5.14.2/Bio/TreeIO/NewickParser.pm:195 STACK: Bio::TreeIO::newick::next_tree /usr/local/share/perl/5.14.2/Bio/TreeIO/newick.pm:143 STACK: main::assign_phylotype /usr/local/Bioinf/AMPHORA2/Scripts/Phylotyping.pl:154 STACK: /usr/local/Bioinf/AMPHORA2/Scripts/Phylotyping.pl:70 This is because Bioperl module Bio::TreeIO::NewickParser.pm in 1.6.9 is unable to parse the RAxML output. To solve the problem, you can either downgrade Bioperl from 1.6.9 to 1.6.1 or modify the module as suggested by Bill Nelson (http://wcnjournalclub.blogspot.com/2014/02/getting-amphora2-to-work-with-bioperl.html).
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.