dactyl-deskmount

Goal

Essentially, make a variant of the dactyl-keyboard that doesn't impose significant extra height above my desk surface.

I previously designed and built the "dactyl-flatpacked", a Dactyl made from slotted acrylic pieces instead of 3D printed, and ended up loving the keyboard. Like most non-planar keyboards it has an issue with overall height. The lowest row requires my wrist/palm needs to clear around 4cm, and unfortunate combinations of desk-chair-user height can exacerbate things. Ultimately it has taught me to properly float my wrists while typing, but I still wanted to see what else could be done.

Another goal I had was to have a pure and simple OpenSCAD version of the dactyl that wouldn't require the complexity of compiling and executing Clojure to generate unreadable OpenSCAD code. This part started out pretty well but over time I got tired of limitations around code organization and stopped trying so hard to keep features modular while still having something aesthetically pleasing.

I still stand by working directly in OpenSCAD, but if I were to start over or dedicate significant time to refactoring I would look into more of the community OpenSCAD libraries for things like generating hulls from profiles instead of mimicking triangle hulls and such that I saw in the origin dactyl code.

Inspiration

Through the mechanical keyboard subreddit I came across a couple of keyboard mounting designs that helped me see the possibility of using ball-and-socket mounts.

ElliotCable: Ergovox

This ergodox keyboard uses RAM mounts screwed into the bottom of a standing desk allowing for a fully vertical (or any angle, really) keyboard orientation.

Martin Körner: Georgi stand with trackball

This georgi uses ball camera mounts attached to a tripod, removing the desktop from the equation altogether. With the tripod you can precisely control height and the trackball mount is a nice bonus as well.

Design Considerations

Desk mounted via clamps

The tripod stand is cool but I work at a desk. Unfortunately when I'm in the office it isn't my desk so stability is sacrificed to avoid drilling holes.

Camera ball mounts

I don't want to go to all the trouble of building a keyboard only to wonder if a steeper tenting angle would be better. I also get to control the pitch and yaw if I like. I had a lot of misgivings about this. Ideally it would be positioned so that the majority of the the force put into the keyboard goes straight through the ball to avoid torque causing the ball to slip.

Unfortunately putting the ball mount directly underneath my hand would take up room underneath the keyboard and cause problems for the sitting position. I made the concession of offsetting the mount a little with the hope that by the time I begin to see obvious slippage I will have found an angle I like and print static arms to clamp onto my desk. Worst case scenario, I can print a more traditional base and use the keyboard on my desktop like an animal.

Keycaps and layout

I use choc low-profile switches because I had them leftover from an earlier iteration I didn't end up liking. I designed and printed custom variations of the 2u keycaps (because, quite simply, I like the Dactyl's thumb cluster) and deep-dished homing keycaps.

The same positioning algorithm from the original Dactyl is used but with a slight outward pivot of the pinky columns, and removed keys:

no number row because I hate it
pinky keys removed from row 4

Were I a braver person I would remove even more keys (the entire pinky columns) and learn to love QMK combos but I never properly made sense of the config options like PERMISSIVE_HOLD and IGNORE_MOD_TAP_INTERRUPT which made for a bad experience in the past.

LEDs

I want to have visual indicators for things like Caps Lock (because I find caps lock useful) and potentially notifications pushed from the host via Raw HID. Admittedly I do think a few subtle lights can add to the keyboard's aesthetics.

Mounting hardware

3d printed desk clamps
- I include a cutout for 1/4"x5/16" tee-nut.
- a 1/4"-20 x 1 1/4" hex bolt (with 3d printed knob and swivel plate) are used for tightening.
1/4" ball mount (I used a ball mount tripod adapter from AliExpress)
- This attaches to my 3d printed clamp via a couple of m4 screws
3d printed keyboard bottom mount attached to the top of the ball mount via another tee-nut.
- at the beginning I set out to use heat-set inserts like I've seen on many other projects but couldn't find a source for the right kind in a useful quantity.
- I'm finding tee-nuts to be incredibly useful in 3d printed projects when I want to securely fasten things to a single screw.
3d printed keyboard plate attaches to 3d printed mount via m3 screws.
- the design uses three m3 mounting holes on the keyboard plate matching up with three holes on the mount (one on the far edge of the thumb cluster and two at the top and bottom of the index finger column).
- there are two more unused screw holes on the pinky finger column in case I want to re-design a more robust bottom mount.
another 3d printed mount hanging underneath the thumb cluster holds a 24-pin wide IC socket for the pro micro controller. Ribbon cables conned the socket pins to the keyboard matrix and TRRS socket. A stripped micro USB connector connects from a sturdier micro USB socket breakout board to the pro micro.

Pre-rendered parts

All printable pieces are pre-rendered (for my specific setup) and available in outputs/pre-rendered/:

nickcoutsos / dactyl-deskmount Goto Github PK