narasak / parrot_3d

Stronger frame, Light weight component and easier to maintenance

Parrot 3D 1.1

https://github.com/narasak/parrot_3d

Introduction

The Parrot 3D is an open source 3D (fdm) printer with more rigid and reliable solution. It allows faster prints, increases precision, makes maintenance easier and reduce plastic parts for extreme precision frame.

Why another build?

Here are the features that explain why I decided to create another printer.

• 3030 Aluminium Extrusions it is strong and rigid frame with easy to build
• Single linear rail on both X-Axis and Y-Axis it provided easier setup, alignment, silent and supper smooth
• Use more precision CNC aluminum and less printed parts (3D printed parts can crack and are less reliable)
• Support 8 types of Extruders with full build volumes (250 mm x 210 mm)
  • Bondtech LGX FF Extruder
  • Bondtech LGX for MK3S & Mosquito
  • Bondtech Prusa MK3S (E3D) Extruder
  • Bondtech Prusa MK3S (Mosquito) Extruder
  • E3D Hemera Extruder
  • Original Prusa Extruder
  • Bear Extruder (Designed by Grégoire Saunier)
  • SFP Extruder (Designed by Gerd Jentz)

Highlight Image

• Open source by providing STEP file

Aftermarket product support

• Prusa MMU2S Adapter Product Page
• RMU MK3 Adapter Product Page
• Reverse Bowden

Firmware

We made custom firmware for Parrot 3D based on popular well known firmware, you can choose firmware that you like.

Here are the place were the Firmware of Parrot 3D are store.

For Who use Original Prusa Einsy RAMBO Board

⚠️ Please switching red and blue wire of your Y and X-Axis motor ⚠️

• Prusa i3 MK3S Firmware
• Bondtech Prusa i3 MK3S Firmware

For Who use SKR 1.4 Turbo Board

• Parrot 3D Firmware
• Marlin Firmware for Parrot 3D Recommended for beginner user to advance user
• Klipper Firmware for Parrot 3D Recommended for intermediate user to advance user
• Parrot 3D Firmware for BTT TFT 3.5" Display

For Who use Duet 3 Mainboard 6CH

• Duet 3 Firmware for Parrot 3D Recommended for advance user

Community

Here are the places were the Parrot 3D project is the most active. Do not hesitate to ask if you have a question :

• Facebook group: facebook.com/groups/parrot3d
• GitHub: github.com/narasak

Where can I get an official kit?

Official distributors

Official distributors are selling a kit with all screws and extrusions ready for the parrot 3d even 3D printed parts.

Parrot 3D (TH)

parrot3d.com

Support our work

The Parrot 3D project is made possible thanks supporters, you can participate via

paypal.com/paypalme/narasakman

parrot_3d's Issues

Is it possible to add dual Y?

I'm anayzing the desing of this printer and I like it so far. However, I've never been a big fan of a single Y axis rail. Can I add two of them?

CNC parts

Is it possible to print the parts that you have listed as cnc aluminum parts and only have step files for? Or those must be done out of aluminum? I was going to print them using asa,abs, or maybe even nylon. Is there a particular reason you didn't list the stl files for those parts? For a second i thought you just didn't finish the printer yet but then I saw the cnc parts.