miragec79 / hevort Goto Github PK
View Code? Open in Web Editor NEWAdvanced DIY 3D Printer
Home Page: https://miragec79.github.io/HevORT/
License: GNU General Public License v3.0
Advanced DIY 3D Printer
Home Page: https://miragec79.github.io/HevORT/
License: GNU General Public License v3.0
On http://docs.hevort.com/#/pages/useful-stuff/links?id=external :
AR: Clicking on EMF Calculator button redirects to http://retractioncalibration.com/
ER: Clicking on EMF Calculator button redirects to EMF Calculator site
The inner diameter of the LowerDisc where the ball screw should fit in is 22mm. But ball screw nuts with a 24mm diameter are also very common.
There is not much room but maybe the design could be adapted, at least in a second version to fit the 24mm ball screw nuts. So not all of the ppl affected need to figure this out, adept the design and print it again :-D
Who comes around this, here is a version with an inner diameter of 24.5mm: https://drive.google.com/file/d/1R7lG31QwiJN3g-fD6eqDFybKqCpFvIof/view?usp=sharing
Best,
Manuel
The link to the STL files is broken.
In the upper left hand section, "Laser engraving," NEMA is misspelled on the face of the motor.
Hi MirageC,
I have printed the parts and everything fits nicely together and looks great! Well done!
What is the DIN rail you used? While all the parts fit well together, the box does not fit on the DIN rail. It is a commonly used 35mm wide rail (DIN rail TS35x7.5).
The clips are too small, I need to apply extreme force to even get close. Any harder and it will break.
Dave
Both the FR and FL motor mounts have (what i assume to be) bad clearance for the inner idler shaft holes. Every other idler shaft hole has r=2.55, except for the two with r=2.50
This makes inserting the pins impossible without a press
Meanwhile the RR, RL, motor covers and tensioners have better clearance
I have been chasing the root cause of this shift in the CADs and I am going all the way back to the ZR2.8 which was the basis for these motor mounts and the issue is also present.
I am surprised that I have not came across this issues when assembling my printer and that no one reported this before today. Good catch @Steffen12345 !
This situation is present on both FrontLeft and FrontRight ZR2.6 Motor mounts. Rear unit is not affected.
I will be correcting the files today and re-issue STLs with corrected dimensions. I will post the update here and on FB.
If you already printed those parts:
I recommend that you're-drill the holes a bit bigger to facilitate the installation. Make sure that both reference surfaces are sitting flush to the 3030 extrusions during installation.
If your printer is assembled (As it is the case for mine):
The impact of this shift is very limited on the overall assembly. Especially with WobbleX. I recommend you leave as is.
According to the VZ Documentation for the Mellow Metal Printhead VZ Documentation for the Mellow Metal Printhead used in this
Vez Metal Print Head & Goliath SHORT and this Vez Metal Print Head & Goliath LONG cad model should be 5mm or 4mm I'd reccomend to change it to 4mm as the kit comes with 4 of them
http://docs.hevort.com/#/printercalibration is not a valid link
The Diameter for the Dowel pin is missing in the BOM and CAD file (here only in nameing the part)
https://docs.hevort.com/bom/BOM_Enclosure_AcidBee.htm
For now Dowel pins need to be 60mm*5mm
Looking for a cad file for the WS12 WobbleX. I may have missed it, but I don't see it anywhere in the cad file. The CAD file contains the 3d printed version. Thank you!
On https://docs.hevort.com/#/pages/component-selection?id=_4-electronics :
AR: Download icon on "BOM - Web" button
ER: Download icon on "BOM Download" button
I downloaded the cad for the hevort from fusion 360, and there's inconsistency in the files where some of them are parametric and some are not, such as the frame and z axis rails and screws, but not the heated bed.
The newer style split carriage used in the XY 2.5 version of STD and HT have thicker section between pulleys and X corss member. For that reason, a revised X cross member needs to be included in the BOM and the frame calculator.
A 315mm build will require a 420mm long X cross member (was 431 per calculator).
The HD9 and HD12 BOM (and printed parts) use an E3 specified idler and pullies that have a flange diameter of 15mm
The STD version uses pulleys with a 18mm flange
A lot of vendors have the 9/10mm width and 12mm pulleys with the flange size 18mm, they doesn't fit, seems to be missing 0.5-1.5mm clearance (have not tested all locations)
From M3NT8L (Discord):
Just shared this in the facebook group, thought Id double down here. Priline PC-CF is not good for our machine parts. Its been shared many times, but a reminder for anyone new is good. This is what I ended up with after a year of printing with my second machine (these pics are a couple years old now)
Even the air pump mount in the electronics bat at only maybe 40 deg max went wet noodle.
Hi Olivier,
currently the panels for the different XY variants (Std, HT, HD) all require different sizes for the cutouts - to be able to use the same panels for all variants would be really nice!
I think the largest cutout is needed for HD12, on the left pulley the lower edge is flush with the extrusion - STD und HT variants both use more on the left side.
i could try to redesign the left pulley mount for the STD variant :)
Kind regards,
Martin
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.