mike-s123 / flexbright-ms44

Flexbright-ms44

MS44 firmware for HexBright FLEX v1.5 Dec 31, 2012

Button presses

Click = quick (<0.2s) press (on/off)

Press = brief (0.2-1s) press (change to next mode)

Long press = 1-2s press, light will fast blink (set constant mode brightness, when off switch sets)

Extended = 2+ seconds, light will slow blink

Basic operation

Click turns on/off. Press cycles through levels/settings. Long press sets brightness in constant mode. Extended press chooses default set.

There are two sets

Constant (different brightness levels), and Dynamic (different flashing patterns). To get non-default set, long press from off. To choose a set as default, extended press while it's active (and on).

Constant set

Press to cycle through 3 low current levels (default: low, moon, medium) and high current mode. Set brightness with long press, then twist to set brightness. Click to confirm.

Dynamic set (always use high current mode):

Press to cycle through dazzle(random), blink (2 Hz), beacon (0,1 Hz, button LED red at 1 Hz), and variable modes. Variable mode gets bright when the flashlight is held horizontally, dim when vertical.

Charging

While charging, button pulses green. When charged, it's steady green.