A hot swap system for Handwire builds column staggered mechanical keyboard, running QMK Firmware on Pro Micro controllers.
Description | Qty | |
---|---|---|
![]() |
Top Plate (1.5mm aluminium or acrylic) | 1 |
![]() |
Upper Middle Plate (3mm acrylic) | 1 |
![]() |
Riveting Plate (2mm acrylic) | 1 |
![]() |
Lower Middle Plate (3mm acrylic) | 1 |
![]() |
Bottom Plate (2mm or 3mm acrylic) | 1 |
![]() |
Arduino Pro Micro | 1 |
![]() |
ProMicro Socket 24 Pin Wide (optional) | 1 |
![]() |
M2 Spacer 5mm or 6mm | 12 |
![]() |
M2 Screw 4mm | 24 |
![]() |
Diode 1N4148 THT | 48 |
![]() |
Single Core 0.5mm Cable | ~3m |
![]() |
Rivet (Hot Swap Sip Socket Similar to Millmax) or 7305-0-15-15-47-27-10-0 Millmax | 92 |
![]() |
EC11 Rotary Encoder | 2 |
![]() |
Knob | 2 |
![]() |
Type C Connector 14 Pin Female | 1 |
![]() |
Micro USB Male Type B 5 Terminal Jack Port Solder Connector | 1 |
![]() |
MX Compatible Key Switch (3pin or 5pin) | 46 |
![]() |
MX Compatible Keycap (1U) | 46 |
Keyboard Maintainer: ozkan