Node JS Module for HUB 75 LED MATRIX Boards.

This was originally created by meg768 available here https://github.com/meg768/hzeller-matrix-example.

Note (2016-07-28)

Software:

Tested with 2016-05-27-raspbian-jessie-lite.img

Hardware:

Tested with RPi2 + Adafruit RGB Matrix HAT(wired in PWM mode) https://www.adafruit.com/products/2345
Tested with RPi3 (use build options for SLOWDOWN) + Adafruit RGB Matrix HAT(wired in PWM mode) https://www.adafruit.com/products/2345

meg768 notes below:

Installation

$ npm install hzeller-matrix --save

Before you install, make sure you have GraphicsMagick installed on the Pi, and some other stuff. $ sudo apt-get update && sudo apt-get dist-upgrade && sudo apt-get install libwebp-dev $ sudo aptitude update && sudo aptitude install libgraphicsmagick++1-dev

Usage

var Matrix = require('hzeller-matrix');
var matrix = new Matrix({width:32, height:32});
matrix.runText('Hello World');

Constructor

new Matrix(config)

Constructs a new matrix object. The config argument must contain the following values.

width - Specifies the width of the display.
height - Specifies the height of the display.

Example

var Matrix = require('hzeller-matrix');
var matrix = new Matrix({width:32, height:32})
...

Methods

matrix.runText(text, options, callback)

This method displays scrolling text. The callback argument is called when the animation completes. The options argument may have the following values.

textColor - Changes text color. Default is red.
fontName - Use the specified TrueType font.
fontSize - Change the font size.
duration - Run no longer this number of seconds. Default is -1, that is until the text is fully displayed.
delay - Scroll delay in milliseconds.
speed - Speed factor. Default 1.0. Lesser value slows down the animation. Greater value speeds it up.
iterations - Number of iterations to display the text. Default is 1. -1 == infinity.

Example

matrix.runText('Hello World', {textColor: 'blue', fontSize:30});

matrix.runImage(image, options, callback)

Display an image. The image parameter may be a string representing the file name or a JavaScript Buffer object. The callback argument is called when the animation completes. The options argument may have the following values.

scroll - Specifies the direction to scroll the image. Valid values are 'left', 'right', 'up', 'down' or 'auto'. Default is 'auto'.
pause - Specifies the time, in seconds, to pause after scroll has finished.
duration - Number of seconds to animate. Default is 60 seconds.
delay - Animation delay during display loop in milliseconds.
iterations - Number of iterations to display the image. -1 == infinity.
speed - Speed factor. Default 1.0. Lesser value slows down the animation. Greater value speeds it up.

matrix.runAmination(gifFile, options, callback)

Runs an animated GIF, frame by frame. The callback argument is called when the animation completes. The options argument may have the following values.

duration - Number of seconds to animate. Default is 60 seconds.
delay - Animation frame delay i milliseconds if the value is missing in the GIF.
speed - Speed factor. Default 1.0. Lesser value slows down the animation. Greater value speeds it up.
iterations - Number of iterations to animate. Default is -1, that is infinite.

matrix.runRain(options, callback)

Displays a Matrix-like rain animation. The options are as follows. The callback argument is called when the animation completes. The options argument may have the following values.

hue - Specifies the hue of the rain. If not specified, it will use the time of day to specify the hue.
duration - Run the animation for duration seconds. -1 == inifinity.
delay - Animation delay during display loop in milliseconds.
speed - Speed factor. Default 1.0. Lesser value slows down the animation. Greater value speeds it up.

matrix.runPerlin(options, callback)

Runs a perlin animation. The callback argument is called when the animation completes. The options argument may have the following values.

mode - Valid modes are 1, 2 or 3.
duration - Run the animation for duration seconds. -1 == inifinity.
delay - Animation delay during display loop in milliseconds.
speed - Speed factor. Default 1.0. Lesser value slows down the animation. Greater value speeds it up.

matrix.isRunning()

Returns true/false if an animation is running or not.

Properties

matrix.width

Returns the matrix width.

matrix.height

Returns the matrix height.

Build Instructions

Instructions how to se up and compile hzeller-matrix as of 2016-07-27.

Install Raspbian image.

Install image 2016-05-27-raspbian-jessie-lite.img. For the Mac, use Pi Filler.

Find out the IP-address of the Raspberry

For the Mac, use Lan Scan or Lan Scan Pro. Google it.

Connect to the Pi

Start a Terminal session and use ssh to connect. When prompted, the password is raspberry.

$ ssh [email protected]

Expand File System

Once connected, start raspi-config and select Expand File System. You may want to change the time zone as well.

$ sudo raspi-config
$ sudo reboot

Update apt-get

$ sudo apt-get update && sudo apt-get dist-upgrade

Install node

$ curl -sL https://deb.nodesource.com/setup_6.x | sudo -E bash -
$ sudo apt-get install -y nodejs

Install GraphicsMagick++

$ sudo aptitude update && sudo aptitude install libgraphicsmagick++1-dev

Install some more stuff

$ sudo apt-get install git libwebp-dev

Download hzeller-matrix

$ git clone https://github.com/meg768/hzeller-matrix.git

Build it

$ cd hzeller-matrix
$ npm install

Configure Wi-Fi

Edit the configuration file.

$ sudo nano /etc/wpa_supplicant/wpa_supplicant.conf

And add this at the end.

network={
	ssid="my-network-name"
	psk="my-password"
}

Save and reboot. Connect again using the same ip-address as before and find out the wlan ip-address by running the following.

$ ifconfig

Now you can disconnect the network cable and log on to this new ip-address in the future.

michaelwschultz / node-led-matrix Goto Github PK

node-led-matrix's Introduction