michaelkroll / ble-shield Goto Github PK

Has the iPhone app in the Github repo been updated to work with the new Firmware? I updated to v1.1.0, but can't seem to get any messages from it. It connects ok, but doesn't respond to any write requests and doesn't print any notifications.

I noticed that the Arduino sketches are still using the old default baudrate 19200, instead of the new one 9600, and the characteristic ids haven't been changed in the header file even though the blog post says they've been changed.

I tried changing them to the new defaults, but haven't had any luck. Can you please test the iPhone app and Arduino sketches with the new firmware to make sure they work? Thanks!

I couldn't Software Serial get to work on a Arduino Mega. And it won't work (probably) on a Arduino Leonardo. The reason is: pin 2 isn't applicable for receiving data on theses boards. Documented here:

http://www.arduino.cc/en/Reference/SoftwareSerial

Hello, me and my classmate are trying to create a weather station, and then receive the data via bluetooth. My question is it possible to combine the Arduino genuino uno with both the BLE Shield and Sparkfun weather shield?

Thanks in advance

Hi, I'm at the link (https://github.com/adafruit/Adafruit-Feather-ESP8266-HUZZAH-PCB) where the .brd and .sch files are. When I open either one, I don't see the board or schematic, just text showing layers, cream, etc. Can someone give me some advice on how to bring these two files into Eagle 5.12 Professional?

Thank you,

Brian

Hi,

I'm working on a project in which i'm using BLE112 board without any shields and i bought a coulple off-shelf BLE modules. I designed a PCB which seems to be correct but i still can't connect to the device. Did You need to upload the firmware using CC Debugger to BLE112 to even be able to connect to the module and use UART?
I'd really appreciate if You could share some information on topic. I can't find much resources on bluegiga's site.

Cheers!