maxi0427 / ese519_lab2b

**GIF

**Our Poposal:

Basiclly we will use both led and I/O, we want use led color to show the idendtity. First we will have a identity pass as a password. If the user entered the true password, the led shows green, otherwise it blink red. The whole plan can be used as a security check may be later we will add a sensor to expand the identity.

**Component require

leds and resistors, breadboard and wires.

**Planning part

We make first line for Green LED, Green LED in series with a signal and resistor, we can control the signal according to the user input. Also for Red LED we have it in series with another signal and resistor. If the user entered right passwors, we give the power to the signal in series with Green Led, other wise we give power to the signal in series with Red Led. This is the Breadboard for the pinout.

**Soldering Process

Now we gonna solder it on the prototype board, During the process:

**Show case

Now it is the Final showcase with prototype board, The passowrd is "ese519", if correctlly entered green led light on. Otherwise RED ON.