lukassup / libvirt-virtual-topology-tf

libvirt virtual topology terraform

libvirt-network-topology-tf

Some shell Terraform scipts to create a basic 2 leaf 2 spine topology from Debian Cloud machines.

graph TD;
    internet --> eth0;
    eth0 --> virbrN;
    subgraph vrf-main
      leaf01 & leaf02 -->|swpN| spine01 & spine02;
    end
    subgraph mgmt-net
      oob-mgmt-server & leaf01 & leaf02 & spine01 & spine02 -->|eth0| virbrN;
    end

Loading

USAGE

Convert topology.dot file to JSON

dot -Tdot_json topology.dot > topology.dot.json

Create topology

terraform apply
# ...
  Enter a value: yes
# ...
# wait a few seconds...
ssh [email protected]

# view bgp routes
debian@leaf01:~$ sudo vtysh -c 'show bgp vrf vrf-main ipv4 unicast'
BGP table version is 5, local router ID is 10.0.0.2, vrf id 5
Default local pref 100, local AS 64514
Status codes:  s suppressed, d damped, h history, * valid, > best, = multipath,
               i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes:  i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found

   Network          Next Hop            Metric LocPrf Weight Path
*> 10.0.0.2/32      0.0.0.0(leaf01)          0         32768 ?
*= 10.0.0.3/32      swp2                                   0 64512 64515 ?
*>                  swp1                                   0 64512 64515 ?
*> 10.0.0.4/32      swp1                     0             0 64512 ?
*> 10.0.0.5/32      swp2                     0             0 64512 ?

Displayed  4 routes and 5 total paths

# verify connectivity between leaf01 & leaf02
debian@leaf01:~$ sudo ip vrf exec vrf-main ping -c1 10.0.0.3
PING 10.0.0.3 (10.0.0.3) 56(84) bytes of data.
64 bytes from 10.0.0.3: icmp_seq=1 ttl=63 time=0.472 ms

--- 10.0.0.3 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.472/0.472/0.472/0.000 ms

Destroy topology

terraform destroy

Remote libvirt

Set libvirt_local=false and libvirt_host variables to

cat > .auto.tfvars <<EOF
libvirt_local=false
libvirt_host="[email protected]"
EOF

NOTE: macOS needs cdrtools for cloudinit disk: brew install cdrtools

Multiple topology instances

Create topology instances 1 & 2

terraform apply -var=topology_id=1 -state=topology1.tfstate
terraform apply -var=topology_id=2 -state=topology2.tfstate

Destroy topology instances 1 & 2

terraform destroy -var=topology_id=1 -state=topology1.tfstate
terraform destroy -var=topology_id=2 -state=topology2.tfstate

CAVEATS

• terraform-libvirt-provider does not implement UDP tunnel network device type so we're adding it using XLST. On subsequent apply runs the provider tries to remove those network devices as they're not defined in the resource. tl;dr - XSLT bad, run terraform apply once

TODO

• Terraform should create p2p links from topology.dot via UDP tunnels
• Terraform should setup udev rules for link names
• Test using Cumulus VX image
• Test more advanced case