ludoux / trguing-qnap

qpkg app of TrguiNG, works for TransmissionBT4

TrguiNG-qnap

qpkg app of TrguiNG and TrguiNG-zh, works for TransmissionBT4 (not 3)

为 QNAP 平台创建的 TrguiNG 和 TrguiNG-zh 软件包，仅适用于 TransmissionBT4 (而不是 3)

openscopeproject/TrguiNG and jayzcoder/TrguiNG

TL;DR

1. Install TransmissionBT 4 made by QoolBox first. I will not get a penny from your installation.
2. Understand that YOU TAKE YOUR OWN RISK to use the qpkg file made by a person you don't even meet or know.
3. Install TrguiNG qpkg made by ludoux in releases page. Remember to select the correct platform. If you need another platform, reply to this post.

长话短说

1. 首先安装由 QoolBox 制作的 TransmissionBT 4。我将不会从您的安装中得到一分钱。
2. 请理解，如果您使用陌生人创建的 qpkg 文件，您需要自行承担风险。
3. 在 releases page 安装 ludoux 制作的 TrguiNG-zh qpkg。请记住选择正确的平台。

Platform Selection

• X86_64 (Intel/AMD)
• arm-x41 / arm-x31 ARMV7 (ARM 32bits)
• arm_64 ( aarch64 / armv8 64bits )

Introduction

I used QDK_2.3.13 to pack the TrguiNG as a qpkg file for QNAP users to install it directly to use this webui, and it only works for TransmissionBT 4 (not 3).

It was built and tested on my own NAS(TS-453Dmini as x86_64) with QTS 5.2.0+

It will rename the original public_html of Tr4 to public_html_old and create a link to TrguiNG folder, as the Transmission4 web control do.

Reference

https://blog.233so.com/2020/05/qdk-quick-start-guide-zh