lotlab / lot60-ble-keyboard Goto Github PK

I am a keyboard enthusiast，I want to know when the author open source g version keyboard.
It is used for tossing，but not commercial！

手机连接此蓝牙键盘要求输入Pin的问题可否解决呢？不是很了解有的蓝牙

Hello, which PCB thickness is recommended?

I have built a Lot60-BLE Rev.F and also a GT-BLE60 and neither keyboard will be recognised by LKB Configurator. I have also bought a Lot60-BLE Rev.F that was assembled from the Taobao store. This keyboard is recognised by LKB Configurator.

I didn't get any information from LKB Configurator on Glab so I downloaded version 0.9.9.10 which requires a web browser but gives a command prompt output. For the PCB purchased from Taobao, there are no messages shown. But for the Lot60-BLE and GT-BLE60 that I built I get the following messages:

I tried compiling the CH554 bootloader myself, and also used the bootloader binaries available here for the BLE60, and the bootloader binary available for the GT-BLE60 on Glab. I used WCHISPTool V2.80 to flash the bootloader.

I noticed that when my PCBs were plugged in, the USB PID and VID would be different to the Taobao PCB.

Taobao:

Self assembled:

The VID and PID is set in the config file but nowhere can I see that Col is set, so I don't understand why my two self assembled keyboards have this set.

The source code for LKB Configurator is not available, so my guess is that the configurator looks for a particular PID and VID value. This value does not change whether or not I build the bootloader from source, or when I flash the precompiled binaries. So perhaps I have faulty CH552 and CH554 chips? (I have tried both. I purchased the CH552 from 优信 so I don't feel like they are fake. I also tried multiple chips with the same result.

Finally, when I use the LKB Configurator to generate the EEP data, it will also not flash with KeymapDownloader and just says Operation timed out:

Hello! I wanted to ask where I can get a BOM?
Thanks!

有打板文件吗

谢谢

'sdld.exe' 不是内部或外部命令，也不是可运行的程序

你好请问这个60的键盘有 外观的模型吗

Hello,
thank you for the great work!

Is this PCB 64 key compatible? I mean with arrow keys?

Thank you very much!

As per the title, now that Rev.GHS has been released will Rev.G be released open source?