loglow / ubraids_se

8HP Eurorack module | Voltage-controlled digital oscillator

µBraids SE (uBraids, microBraids) Eurorack [Rev E]

8HP Eurorack module | Voltage-controlled digital oscillator

µBraids SE is a voltage-controlled digital oscillator/sound source in 8HP with a wide range of creative and useful sound generation algorithms (aka models).

This re-engineered Eurorack module updates and simplifies the classic Mutable Instruments Braids design with a custom brilliant orange LED display module protected by a clear acrylic lens, a low-profile rotary encoder, and an added attenuverter.

Fully compatible with upstream Braids firmware. Includes power cable, mounting hardware, and a one-year warranty. Designed and built with care by Tall Dog Electronics in Western Massachusetts. Licensed CC BY-SA 4.0 open source hardware.

• Height: 3U (128.5 mm)
• Width: 8HP (40.3 mm)
• Depth: 31 mm (with power)
• +12V: 100 mA (average)
• -12V: 15 mA (average)

ubraids_se's Issues

top and bottom rail clearance is way too small

Eurorack has about 9mm top and bottom clearance, leaving ~110mm for the PCB. you have only 6.5mm on the top and ~7mm on the bottom which makes the module not fit with most Eurorack rails.