lilxandrias / ipmimanager

IPMI manager written in C++

IPMIManager

Welcome to IPMI Manager, an experimental and educational project for spare time.

Building

To install IPMI Manager, follow these steps:

Before installation ensure you have following dependencies: CMake, ipmitool

1. Clone the repository:

git clone https://github.com/lilxandrias/ipmimanager

2. Navigate to the project directory

cd ipmimanager

3. Create a build directory

mkdir build

4. Navigate to the build directory

cd build

5. Run CMake to configure the project:

cmake ..

6. Build the project

make

7. Execute IPMIManager

./ipmimanager

What works?

• Power commands: status, on, off, cycle, reset, diag, soft

• Sensor commands: reading sensor data inside program

• Password authentication with option to save credentials

• Option to specify local IPMI device

• Option to choose Interface

• Option to specify RMCP port

• Option to change size of communication channel (OEM)

• Option to use only IPv4

• Option to use only IPv6

• IPMIv2 Authentication

• Option to choose authentication type

• Option to set privilege level

• Option to set local IPMB address

• Option to set destination channel for bridged request (dual bridge)

• Option to set transit address for bridge request (dual bridge)

• Option to set destination lun for raw commands

• Option to setup for OEM

• Option to use file for OEM SEL event descriptions

• Option to specify timeout

• Option to set number of retries for lan/lanplus interface

• Option to display all dates in UTC

• Option to send RAW IPMI requests and prompt response

• Option to send i2c commands and print responses

• Option to print spd info from remote I2C device

• Option to configure LAN channels

• Option to get chassis status and set power state

• Option to send pre-defined events to MC

• Option to print Sensor Data Repository entries and readings

• Option to print built-in FRU and scan SDR for FRU locators

• Option to Read/Write Device associated with Generic Device locators sdr

• Option to print system event log (SEL)

• Option to configure Platform Event Filtering (PEF)

• Option to configure and connect IPMIv2.0 Serial-over-LAN

• Option to configure and connect with Tyan IPMIv1.5 Serial-over-LAN

• Option to configure IPMIv1.5 Serial-over-LAN

• Option to configure management controller users

• Option to configure management controller channels

• Option to print session information

• Option to use Data Center Management Interface

• Option to use Node Manager Interface

• Option to enter OEM Commands for Sun servers

• Option to enter OEM Commands for Kontron devices

• Option to Run a PICMG/ATCA exetended cmd

• Option to update IPMC using Kontron OEM Firmware Update Manager

• Option to configure firmware firewall

• Option to enter OEM Commands for Dell sytems

• Option to launch interactive IPMI shell

• Option to run list of commands from file

• Option to set runtime variables for shell and exec

• Option to update HPM components using PICMG HPM.1 file

• Option to run FRU-EKeyring analyzer using FRU files

• Option to update Intel Manageability Engine Firmware

• Option to run a VITA 46.11 extended cmd

• Option to configure IPv6 LAN channels

License

This project is licensed under the terms of the MIT License. See the LICENSE file for details.