ksator / openconfig-demo-with-juniper-devices

How to configure Juniper devices using configuration data models written in YANG and published on Github by OpenConfig.

What to find on this repo:

How to configure Juniper routers using configuration data models written in YANG and published by Openconfig.
It covers various options:

• Devices Command Line Interface
• NetConf in an SSH connection
• Network automation with Ansible
• Network automation with PyEZ (python library to interact with Junos)

So it also covers how to automate Openconfig on Juniper devices.
It also covers basic usages of YANG tools:

• pyang
• pyangbind

Doc:

A presentation is at the root of the repo.
Please visit wiki to get all the details regarding this project.

How to clone this repo:

In order to download both the code and the wiki:

git clone https://github.com/ksator/openconfig-demo-with-juniper-devices.git
git clone https://github.com/ksator/openconfig-demo-with-juniper-devices.wiki.git
ls

openconfig-demo-with-juniper-devices's Issues

How to needs a few more details for newbies ...

.... as well as techpubs

This must be really obvious since it's not mentioned anywhere in documentation ... but once openconfig is installed, there is nothing to see. It would be very helpful to point out that a configuration statements must be built with openconfig as well as how to use translation scripts in Junos.

Thanks

I am studying NETCONF and YANG for the first time.

Hi ksator,
I'm shhwang.

I am studying NETCONF and YANG for the first time.
I have a three question.

First, Do I have to add all of these yang module using 'request system yang add module' to Junos device?
'YANG Module(s) :iana-if-type.yang ietf-inet-types.yang ietf-interfaces.yang ietf-yang-types.yang jnx-aug-openconfig-bgp.yang jnx-aug-openconfig-if-ip.yang jnx-aug-openconfig-interfaces.yang jnx-aug-openconfig-lacp.yang jnx-aug-openconfig-lldp.yang jnx-aug-openconfig-mpls.yang jnx-openconfig-dev.yang openconfig-bgp-multiprotocol.yang openconfig-bgp-operational.yang openconfig-bgp-policy.yang openconfig-bgp-types.yang openconfig-bgp.yang openconfig-extensions.yang openconfig-if-aggregate.yang openconfig-if-ethernet.yang openconfig-if-ip-ext.yang openconfig-if-ip.yang openconfig-interfaces.yang openconfig-lacp.yang openconfig-lldp-types.yang openconfig-lldp.yang openconfig-local-routing.yang openconfig-mpls-igp.yang openconfig-mpls-ldp.yang openconfig-mpls-rsvp.yang openconfig-mpls-sr.yang openconfig-mpls-static.yang openconfig-mpls-te.yang openconfig-mpls-types.yang openconfig-mpls.yang openconfig-platform-types.yang openconfig-platform.yang openconfig-policy-types.yang openconfig-rib-bgp-ext.yang openconfig-rib-bgp-types.yang openconfig-rib-bgp.yang openconfig-routing-policy.yang openconfig-terminal-device.yang openconfig-transport-types.yang openconfig-types.yang openconfig-vlan-types.yang openconfig-vlan.yang'

Second, How can I create or get a programs?
' Translation Script(s) :openconfig-bgp.slax openconfig-interface.slax openconfig-local-routing.slax openconfig-mpls.slax openconfig-policy.slax'

Third, Have you used the 'NetConf Browser' created by mg-soft corporation with NETCONF and YANG?

I would be very happy if you answer these questions.
Thanks.

Regards,

Different payloads

Hi,

I am testing different OpenConfig payloads, however I am not sure of the xml namespaces.

eg, in your description of BGP OpenConfig format over ssh, you sent in the payload below:

<rpc>
    <get-config>
        <source><running/></source>
        <filter type="subtree">
            <bgp xmlns="http://openconfig.net/yang/bgp">
            </bgp>
        </filter>
    </get-config>
</rpc>
]]>]]>

Could you share some more examples of the payload, for eg. for interface? Juniper documentation doesn't have a wide coverage of this.

Also could you suggest of a console to communicate with the NETCONF agent on the Juniper device. Eg. something like this https://github.com/OpenNetworkingFoundation/configuration/tree/master/netconf-console

mismatch neighbor address in wiki page

wiki

6. Openconfig demo using NetConf over SSH.
   Let's use the operation get-config with a filter to retrieve a specific neighbor subtree from the active configuration:

<rpc>
    <get-config>
        <source><running/></source>
        <filter type="subtree">
            <bgp xmlns="http://openconfig.net/yang/bgp">
                <neighbors>
                    <neighbor>
                        <neighbor-address>**10.10.0.2**</neighbor-address>
                    </neighbor>
                </neighbors>
            </bgp>
        </filter>
    </get-config>
</rpc>

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" xmlns:junos="http://xml.juniper.net/junos/16.1I0/junos">
<data>
<bgp xmlns="http://openconfig.net/yang/bgp">
    <neighbors>
        <neighbor>
            <neighbor-address>**192.168.1.2**</neighbor-address>
            <config>
                <peer-as>110</peer-as>
                <peer-group>OC</peer-group>
            </config>
        </neighbor>
    </neighbors>
</bgp>
</data>
</rpc-reply>