komar007 / atmel_bootloader Goto Github PK

Hi Komar, I post an issue at the tmk keyboard github page, and found this project after some search.

Basically my question is actually posted at tmk/tmk_keyboard#79

I would like to build a new revision of the key64 keyboard with a atmel chip instead of a teensy board.

I found you use the tmk keyboard to program the GH60, I also use the tmk keyboard firmware with some modifications for the key64 Fn Layout, so I need to borrow some ideas from you.

If I want to play with such chip what others things do I need ? I suspect the chip with pin holes is the ATMEGA32A-PU available at http://co.mouser.com/ProductDetail/Atmel/ATMEGA32A-PU/?qs=sGAEpiMZZMvnwheKzbT%252bF%2fUkeb%2fIhzVI but I saw that you use other electronics components as well with the GH60 (aside from switches and diodes), so what others do I need to buy ?

With the first revision of the key64 I just use 1 teensy, 64 switches, 64 diodes, 4 resistances and 2 bi leds, very simple.

Thank you !