Environmental Regulation System
Latest version: 8.5.4
Mycodo is open source software for the Raspberry Pi that couples inputs and outputs in interesting ways to sense and manipulate the environment.
Mycodo Manual (PDF, HTML, TEXT)
Mycodo API (Latest Version: v1)
Mycodo Custom Inputs and Controllers Repository
For technical support discussion, use the Mycodo Forum
Table of Contents
- Inputs that record measurements from a number of places, including sensors, GPIO pin states, analog-to-digital converters, etc. (or write your own custom input module).
- Outputs that perform actions such as switching GPIO pins high/low, generating PWM signals, executing Linux shell commands and Python code, etc. (or write your own custom output module).
- Web Interface for securely accessing the system using a web browser on your local network or anywhere in the world with an internet connection.
- Dashboard that display configurable widgets, including interactive live and historical graphs, gauges, output state indicators, text measurements.
- Proportional Integral Derivative (PID) controllers that regulate environmental conditions with feedback loops utilizing Inputs and Outputs.
- Setpoint Tracking for changing a PID controller setpoint over time, for use with things like reptile terrariums, reflow ovens, thermal cyclers, sous-vide cooking, and more.
- Conditional Statements that react to input measurements, manipulate outputs, and execute actions based on user-generated code. This is a very powerful feature that enables custom user-created conditions for Inputs, Outputs, Actions, and other parts of the system.
- Triggers that can trigger actions at periodic intervals (daily, duration, sunrise/sunset, etc.).
- Alerts to notify via email when measurements reach or exceed user-specified thresholds.
- Notes to keep track of events, alerts, and other important points in time.
- Camera Feed for remote live stream, image capture, or time-lapse photography.
- Energy Usage Statistics to calculate and track power consumption and cost over time.
- Upgrade System to easily upgrade the Mycodo system to the latest release or restore to a previously-backed up version.
- Translation to several languages, including English, Chinese, Dutch, German, French, Italian, Norwegian, Portuguese, Russian, Serbian, Spanish, and Swedish.
Originally developed to cultivate edible mushrooms, Mycodo has evolved to do much more. Here are a few things that have been done with Mycodo:
My projects
- Hydroponic System Automation
- Mushroom cultivation
- Ground-based plant cultivation
- Maintaining honey bee apiary homeostasis
- Maintaining humidity in an underground artificial bat cave
- Remote radiation monitoring and mapping
- Cooking sous-vide
Featured
Projects of others
- Maintaining aquatic systems (e.g. fish, hydroponic, aquaponic)
- Maintaining terrarium, herpetarium, and vivarium environments
- Incubating young animals and eggs
- Aging cheese
- Dry-aging, curing, and smoking meat (1)
- Fermenting beer, food, and tobacco
- Controlling reflow ovens
- Culturing microorganisms
- Treating agricultural waste water (1)
- ...and more
Let me know how you use Mycodo, and I may include it on this list.
Visit the Screenshots page of the Wiki.
- Raspberry Pi single-board computer (any version: Zero, 1, 2, 3, or 4)
- Raspbian OS flashed to a micro SD card
- An active internet connection
Mycodo has been tested to work with Raspbian Buster Lite (2019-09-26).
Once you have the Raspberry Pi booted into Raspbian with an internet connection, run the following command in a terminal to initiate the Mycodo install:
curl -L https://kizniche.github.io/Mycodo/install | bash
Make sure the install script finishes without errors. A log of the
output will be created at ~/Mycodo/install/setup.log
.
If the install is successful, the web user interface should be
accessible by navigating a web browser to https://127.0.0.1/
,
replacing 127.0.0.1
with your Raspberry Pi's IP address. The first
time you visit this page, you will be prompted to create an admin user.
You will then be redirected to the login page. Once logged in, check
that the host name and version number at the top left of the page is
green, indicating the daemon is running. Red indicates the
daemon is inactive or unresponsive. Ensure any java-blocking plugins are
disabled for all parts of the web interface to function properly.
If you receive an unresolvable error during the install, please create an issue. If you want to try to diagnose the issue yourself, see Diagnosing Issues.
A minimal set of anonymous usage statistics are collected to help
improve development. No identifying information is saved from the
information that is collected and it is only used to improve Mycodo. No
other sources will have access to this information. The data collected
is mainly how much specific features are used, and other similar
statistics. The data that's collected can be viewed from the 'View
collected statistics' link in the Settings -> General
page. You may
opt out from the General Settings page.
Before making a post to the forum, slack, or issue tracker on github, please read the Manual.
If you Mycodo is supposedly operating correctly and you would like assistance with how to configure the system or to merely discuss something related to Mycodo, do a search on the Mycodo Forum for a similar discussion. If a pertinent topic doesn't already exist on the forum, create a new post in the appropriate subforum.
You can also find Mycodo on slack at mycodo.slack.com.
If you believe there is a bug in the Mycodo software, first search through the guthub Issues and see if your issue has already been discussed or resolved. If your issue is novel, you can create a New Issue. When creating a new issue, make sure to read all information in the issue template and follow the instructions. Replace the template text with the actual information, such as "step 1" under "Steps to Reproduce the issue" should be replaced with the actual step to reproduce the issue.
The Mycodo Manual may be viewed as Markdown, PDF, HTML, or Plain Text
The Mycodo Wiki also contains useful information.
The latest API documentation can be found here: Mycodo API Docs
If a new API version is released, older documentation will be provided here.
A proportional-derivative-integral (PID) controller is a control loop feedback mechanism used throughout industry for controlling systems. It efficiently brings a measurable condition, such as temperature, to a desired state (setpoint). A well-tuned PID controller can raise to a setpoint quickly, have minimal overshoot, and maintain the setpoint with little oscillation.
The top graph visualizes the regulation of temperature. The red line is the desired temperature (setpoint) that has been configured to change over the course of each day. The blue line is the actual recorded temperature. The green vertical bars represent how long a heater has been activated for every 20-second period. This regulation was achieved with minimal tuning, and already displays a very minimal deviation from the setpoint (±0.5° Celsius). Further tuning would reduce this variability further.
See the PID Controller and PID Tuning sections of the manual for more information.
All supported Inputs can be found under the Input Devices section of the manual.
Mycodo supports importing custom Input, Output, and Controller modules. you can find more information about each in the manual under Custom Inputs, Custom Outputs, and Custom Controllers.
If you would like to add to the list of supported Inputs, Outputs, and Controllers, submit a pull request with the module you created or start a New Issue.
Additionally, I have another github repository devoted to custom Inputs, Outputs, and Controllers that do not necessarily fit with the built-in set and are not included by default with Mycodo, but can be imported. These can be found at kizniche/Mycodo-custom.
I have always made Mycodo free, and I don't intend on changing that. However, if you would like to make a donation, you can find several options to do so at KyleGabriel.com/donate
Thanks for using and supporting Mycodo, however it may not be the latest version or it may have been altered if not obtained through an official distribution site. You should be able to find the latest version on github or my web site.
https://github.com/kizniche/Mycodo
Mycodo is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
Mycodo is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
A full copy of the GNU General Public License can be found at http://www.gnu.org/licenses/gpl-3.0.en.html
This software includes third party open source software components. Please see individual files for license information, if applicable.
- Native: English
- Complete: Dutch, German, French, Italian, Norwegian, Portuguese, Russian, Serbian, Spanish, Swedish, Chinese.
By default, mycodo will display the default language set by your browser. You may also
force a language in the settings at [Gear Icon] -> Configure -> General -> Language
If you would like to improve the translations, you can submit a pull request with an amended .po file from ~/Mycodo/mycodo/mycodo_flask/translations/ or start a New Issue detailing the corrections.
The native language used in the software.
Mycodo is een geautomatiseerd monitoring- en regelsysteem dat is gebouwd om op de Raspberry Pi te draaien (versies Zero, 1, 2, 3 en 4).
Oorspronkelijk ontworpen om eetbare paddenstoelen te kweken, is Mycodo uitgegroeid tot het vermogen om veel meer te doen, waaronder het kweken van planten, het kweken van micro-organismen, het onderhouden van bijenbijen bij de bijen, het incuberen van dieren en eieren, het onderhouden van aquatische systemen, het ouder worden van kazen, het fermenteren van voedsel en tabak, het koken eten (sous-vide) en meer.
Het systeem bestaat uit een backend (daemon) en een frontend (gebruikersinterface). De backend voert metingen uit van sensoren en apparaten, coördineert vervolgens een diverse reeks antwoorden op die metingen, inclusief het vermogen om outputs te moduleren (relais, PWM, draadloze outlets), omgevingsomstandigheden te regelen met elektrische apparaten onder PID-regeling (gestage regeling of omschakeling tijd), timers plannen, foto's maken en video streamen, acties activeren wanneer metingen aan bepaalde voorwaarden voldoen (relais moduleren, opdrachten uitvoeren, per e-mail op de hoogte stellen, etc.) en meer. De frontend is een webinterface die gemakkelijke navigatie en configuratie mogelijk maakt vanaf elk apparaat met een browser.
Mycodo est un système de surveillance et de régulation automatisé conçu pour fonctionner sur le Raspberry Pi (versions zéro, 1, 2, 3 et 4).
Conçu à l'origine pour cultiver des champignons comestibles, Mycodo s'est développé pour inclure la capacité de faire beaucoup plus, notamment la culture de plantes, la culture de micro-organismes, le maintien de l'homéostasie du rucher des abeilles, la mise en incubation des animaux et des œufs, la maintenance des systèmes aquatiques, le vieillissement des fromages, la fermentation nourriture (sous vide), et plus.
Le système comprend un serveur (démon) et une interface utilisateur (interface utilisateur). Le système effectue des mesures à partir de capteurs et d’appareils, puis coordonne un ensemble divers de réponses à ces mesures, notamment la possibilité de moduler les sorties (relais, PWM, prises sans fil), de réguler les conditions environnementales avec des appareils électriques sous contrôle PID (régulation continue ou basculement temps), planifiez des minuteries, capturez des photos et des flux vidéo, déclenchez des actions lorsque les mesures répondent à certaines conditions (moduler des relais, exécuter des commandes, notifier par courrier électronique, etc.), etc. L'interface Web est une interface Web qui facilite la navigation et la configuration à partir de tout appareil compatible avec le navigateur.
Mycodo ist ein automatisiertes Überwachungs- und Regulierungssystem, das für den Raspberry Pi (Versionen Zero, 1, 2, 3 und 4) entwickelt wurde.
Ursprünglich für die Kultivierung von Speisepilzen konzipiert, hat Mycodo die Fähigkeit zu weitaus mehr erweitert, darunter die Kultivierung von Pflanzen, die Kultivierung von Mikroorganismen, die Aufrechterhaltung der Homöostase der Bienenhaus-Bienenhäuser, die Inkubation von Tieren und Eiern, die Aufrechterhaltung von Wassersystemen, das Altern von Käse, das Gären von Lebensmitteln und Tabak sowie das Kochen Essen (Sous-Vide) und mehr.
Das System besteht aus einem Backend (Daemon) und einem Frontend (Benutzeroberfläche). Das Backend führt Messungen von Sensoren und Geräten durch und koordiniert dann eine Vielzahl von Reaktionen auf diese Messungen, einschließlich der Möglichkeit, Ausgänge (Relais, PWM, drahtlose Ausgänge) zu modulieren und Umgebungsbedingungen mit elektrischen Geräten unter PID-Steuerung zu regulieren (stetige Regelung oder Umschaltung) Zeit), Zeitpläne planen, Fotos aufnehmen und Videos streamen, Aktionen auslösen, wenn Messungen bestimmte Bedingungen erfüllen (Relais modulieren, Befehle ausführen, per E-Mail benachrichtigen usw.) und vieles mehr. Das Frontend ist eine Weboberfläche, die eine einfache Navigation und Konfiguration von jedem Browser-fähigen Gerät aus ermöglicht.
Mycodo è un sistema di monitoraggio e regolazione automatico che è stato creato per funzionare sul Raspberry Pi (versioni Zero, 1, 2, 3 e 4).
Originariamente progettato per coltivare funghi commestibili, Mycodo è cresciuto fino a comprendere la capacità di fare molto di più, coltivando piante, coltivando microrganismi, mantenendo l'omeostasi delle api apistiche del miele, incubando animali e uova, mantenendo sistemi acquatici, formaggi stagionati, alimenti fermentati e tabacco, cucinando cibo (sous-vide) e altro ancora.
Il sistema comprende un backend (demone) e un frontend (interfaccia utente). Il back-end esegue misurazioni da sensori e dispositivi, quindi coordina un insieme diversificato di risposte a tali misurazioni, inclusa la possibilità di modulare le uscite (relè, PWM, prese wireless), regola le condizioni ambientali con dispositivi elettrici sotto controllo PID (regolazione costante o commutazione tempo), programmare i timer, acquisire foto e trasmettere video, attivare azioni quando le misurazioni soddisfano determinate condizioni (modulazione di relè, esecuzione di comandi, notifica via e-mail, ecc.) e altro. Il frontend è un'interfaccia web che consente una facile navigazione e configurazione da qualsiasi dispositivo abilitato per il browser.
Mycodo er et automatisert overvåkings- og reguleringssystem som ble bygget for å kjøre på Raspberry Pi (versjoner Zero, 1, 2, 3 og 4).
Mycodo er opprinnelig utviklet for å dyrke spiselige sopp, og har vokst til å inkludere muligheten til å gjøre mye mer, inkludert dyrking av planter, dyrking av mikroorganismer, opprettholder honningbi apiary homeostasis, inkubering av dyr og egg, opprettholde akvatiske systemer, aldrende oster, fermenterende matvarer og tobakk, matlaging mat (sous-vide) og mer.
Systemet består av en backend (daemon) og en frontend (brukergrensesnitt). Backend utfører målinger fra sensorer og enheter, og koordinerer deretter et mangfoldig sett med svar på disse målingene, inkludert muligheten til å modulere utganger (reléer, PWM, trådløse uttak), regulere miljøforhold med elektriske enheter under PID-kontroll (stabil regulering eller endring over tid), planlegge timere, ta bilder og streame video, utløse handlinger når målingene oppfyller visse forhold (modulere reléer, utføre kommandoer, varsle via e-post, etc.) og mer. Frontend er et webgrensesnitt som gjør det enkelt å navigere og konfigurere fra hvilken som helst nettleseraktivert enhet.
O Mycodo é um sistema automatizado de monitoramento e regulação que foi construído para rodar no Raspberry Pi (versões Zero, 1, 2, 3 e 4).
Originalmente concebido para cultivar cogumelos comestíveis, o Mycodo cresceu para incluir a capacidade de fazer muito mais, incluindo cultivar plantas, cultivar microorganismos, manter a homeostase do apiário de abelhas, incubar animais e ovos, manter sistemas aquáticos, queijos envelhecidos, fermentar alimentos e tabaco, cozinhar comida (sous-vide) e muito mais.
O sistema compreende um backend (daemon) e um frontend (interface de usuário). O backend conduz medições a partir de sensores e dispositivos e coordena um conjunto diversificado de respostas a essas medições, incluindo a capacidade de modular saídas (relés, PWM, tomadas sem fio), regular as condições ambientais com dispositivos elétricos sob controle PID (regulação estável ou troca tempo), agendar cronômetros, capturar fotos e transmitir vídeo, acionar ações quando as medições atenderem a determinadas condições (modular relés, executar comandos, notificar por e-mail etc.) e muito mais. O frontend é uma interface da web que permite fácil navegação e configuração a partir de qualquer dispositivo habilitado para navegador.
Mycodo - это автоматизированная система мониторинга и регулирования, созданная для работы на Raspberry Pi (версии Zero, 1, 2, 3 и 4).
Первоначально разработанный для выращивания съедобных грибов, Mycodo вырос и теперь способен делать гораздо больше, включая выращивание растений, выращивание микроорганизмов, поддержание гомеостаза пасеки медоносных пчел, инкубацию животных и яиц, поддержание водных систем, старение сыров, ферментацию продуктов и табака, приготовление пищи. еда (sous-vide) и многое другое.
Система включает в себя бэкэнд (демон) и интерфейс (пользовательский интерфейс). Бэкэнд проводит измерения от датчиков и устройств, затем координирует разнообразный набор ответов на эти измерения, включая возможность модулировать выходы (реле, ШИМ, беспроводные выходы), регулировать условия окружающей среды с помощью электрических устройств под управлением ПИД (постоянное регулирование или переключение). время), планировать таймеры, захватывать фотографии и потоковое видео, запускать действия, когда измерения соответствуют определенным условиям (модулировать реле, выполнять команды, отправлять уведомления по электронной почте и т. д.) и многое другое. Интерфейс представляет собой веб-интерфейс, который обеспечивает простую навигацию и настройку с любого устройства с поддержкой браузера.
Мицодо је аутоматски систем за надзор и регулацију који је направљен да ради на Распберри Пи (верзије Зеро, 1, 2, 3 и 4).
Оригинално дизајниран за узгајање јестивих гљива, Мицодо је нарастао на могућност да уради много више, укључујући култивирање биљака, култивисање микроорганизама, одржавање хомеостазе пчелињег меда, инкубирање животиња и јаја, одржавање водених система, старење сирева, ферментисање хране и дуван, кухање храна (соус-виде), и више.
Систем садржи бацкенд (даемон) и фронтенд (кориснички интерфејс). Бацкенд врши мерења од сензора и уређаја, затим координира различите одговоре на та мерења, укључујући могућност модулације излаза (релеји, ПВМ, бежичне утичнице), регулисање услова околине са електричним уређајима под ПИД контролом (стална регулација или промена време), распоред времена, снимање фотографија и стримовање видео снимака, акције покретања када мерења испуњавају одређене услове (модулација релеја, извршавање команди, обавештавање путем е-поште, итд.), и још много тога. Фронтенд је веб интерфејс који омогућава једноставну навигацију и конфигурацију са било ког уређаја са омогућеним претраживачем.
Mycodo es un sistema automatizado de monitoreo y regulación que fue creado para ejecutarse en la Raspberry Pi (versiones cero, 1, 2, 3 y 4).
Originalmente diseñado para cultivar hongos comestibles, Mycodo ha crecido para incluir la capacidad de hacer mucho más, incluido el cultivo de plantas, el cultivo de microorganismos, el mantenimiento de la homeostasis de las abejas, la incubación de animales y huevos, el mantenimiento de los sistemas acuáticos, el envejecimiento de los quesos, la fermentación de alimentos y el tabaco, la cocina. comida (sous-vide), y más.
El sistema comprende un backend (daemon) y un frontend (interfaz de usuario). El backend realiza mediciones desde sensores y dispositivos, luego coordina un conjunto diverso de respuestas a esas mediciones, incluida la capacidad de modular salidas (relés, PWM, salidas inalámbricas), regular las condiciones ambientales con dispositivos eléctricos bajo control PID (regulación constante o cambio tiempo), programe temporizadores, capture fotos y transmita videos, active acciones cuando las mediciones cumplan ciertas condiciones (module relés, ejecute comandos, notifique por correo electrónico, etc.) y más. La interfaz es una interfaz web que permite una fácil navegación y configuración desde cualquier dispositivo con navegador.
Mycodo är ett automatiserat övervaknings- och reglersystem som byggdes för att springa på Raspberry Pi (versioner noll, 1, 2, 3 och 4).
Mycodo har ursprungligen utformats för att odla ätliga svampar, och har därmed ökat möjligheten att göra mycket mer, inklusive odling av växter, odlingsmikroorganismer, upprätthållande av honeybee apiary homeostasis, inkubering av djur och ägg, upprätthållande av vattenlevande system, åldrande ostar, jäsning av mat och tobak, matlagning mat (sous-vide) och mer.
Systemet innefattar en backend (daemon) och en frontend (användargränssnitt). Bakgrunden utför mätningar från sensorer och enheter och samordnar sedan en mängd olika svar på dessa mätningar, inklusive möjligheten att modulera utgångar (reläer, PWM, trådlösa uttag), reglera miljöförhållandena med elektriska enheter under PID-kontroll (ständig reglering eller byte över tid), schemalägg timer, ta bilder och strömma video, utlös åtgärder när mätningar uppfyller vissa villkor (modulera reläer, utföra kommandon, meddela via e-post etc.) och mer. Frontend är ett webbgränssnitt som möjliggör enkel navigering och konfiguration från alla webbläsaraktiverade enheter.
Mycodo是一个自动监控和调节系统,可在Raspberry Pi上运行(版本为Zero,1,2,3和4)。
Mycodo最初设计用于种植可食用的蘑菇,已经发展到能够做更多的事情,包括种植植物,培养微生物,保持蜂蜜蜂房稳态,孵化动物和鸡蛋,维持水生系统,陈年奶酪,发酵食品和烟草,烹饪食物(sous-vide)等等。
该系统包括后端(守护进程)和前端(用户界面)。后端从传感器和设备进行测量,然后协调对这些测量的各种响应,包括调制输出(继电器,PWM,无线插座)的能力,通过PID控制的电气设备调节环境条件(稳定调节或转换时间),安排计时器,捕获照片和流视频,在测量满足特定条件时触发操作(调制继电器,执行命令,通过电子邮件通知等)等等。前端是一个Web界面,可以从任何支持浏览器的设备轻松导航和配置。